Dealing with Kindle for PC/Mac 1.19 and KFX in calibre - Page 50

jonn.doe · 04-03-2020, 07:33 AM

Found the problem - not the firewall. I installed virtualbox and the network driver creates a proxy that confused the kindle prog. Weird. So just disabled the network driver bye open network & internet settings - change adapter settings and disable virtual host only adapter. Very strange. And no the kindle prog wasn't using a proxy either...

bertofa · 04-13-2020, 12:40 PM

I run Calibre 4.13 on a MacBook Pro 2017 13" with MacOS Catalina 10.15.4. I got the book ("I maestri invisibili", by Igor Sibaldi) from Amazon's Kindle store but the plugin in Calibre can't de-drm it

This is the debug:

Spoiler:

Thanks a lot in advance for any help

jhowell · 04-13-2020, 01:48 PM

Quote:

Originally Posted by bertofa

I got the book ("I maestri invisibili", by Igor Sibaldi) from Amazon's Kindle store but the plugin in Calibre can't de-drm it

Providing assistance with DRM removal is not allowed on MobileRead.

Ask for help at either Apprentice Harper's GitHub or Apprentice Alf's Blog.

DNSB · 04-13-2020, 06:44 PM

Quote:

Originally Posted by bertofa

I run Calibre 4.13 on a MacBook Pro 2017 13" with MacOS Catalina 10.15.4. I got the book ("I maestri invisibili", by Igor Sibaldi) from Amazon's Kindle store but the plugin in Calibre can't de-drm it

I would suggest you read the first messages in this thread. It seems rather likely that your Mac did not have an early enough version of Kindle for Mac to allow books to be downloaded as AZW (mobi or azw3) so you are downloading a KFX. You might also want to check out the link to the FAQs on Apprentice Harper's GitHub site shown in the output you posted. Pay special attention to the section titled A Recent Change to Kindle for PC/Kindle for Mac.

odamizu · 04-14-2020, 01:36 AM

Quote:

Originally Posted by bertofa

I run Calibre 4.13 on a MacBook Pro 2017 13" with MacOS Catalina 10.15.4. ...

Quote:

Originally Posted by DNSB

... It seems rather likely that your Mac did not have an early enough version of Kindle for Mac to allow books to be downloaded as AZW (mobi or azw3) so you are downloading a KFX ...

Unfortunately, bertofa is running Catalina, which requires K4Mac 1.25 or later.

It may be too late since Catalina is already installed, but if you have backups of older versions, you might be able to get it working. See: https://www.mobileread.com/forums/sh...&postcount=508

lkmiller · 04-14-2020, 01:37 AM

I suggest looking at Method 3 in the first post.

bertofa · 04-17-2020, 11:06 AM

Sorry. I was not intentionally wrong.

bertofa · 04-17-2020, 11:09 AM

Quote:

Originally Posted by jhowell

Providing assistance with DRM removal is not allowed on MobileRead.

Ask for help at either Apprentice Harper's GitHub or Apprentice Alf's Blog.

Sorry. I wasn't intentionally wrong

bertofa · 04-17-2020, 11:18 AM

Quote:

Originally Posted by lkmiller

I suggest looking at Method 3 in the first post.

Thanks

It worked. The only difference was I didn't need to search for "the proper folder containing the downloaded file". After step 3 a dialog box popped up who asked me if I wanted to use Caliber to open the file.

smersh · 04-24-2020, 10:12 PM

Quote:

Originally Posted by smersh

As an update to this, my previous Mac had to be replaced. Got a new one that was on Catalina. Restored from Time Machine backup.

I had to sign back into an account, so I tried my luck and signed into both of my accounts, downloaded a book from each, converted the books into something else in Calibre.

Success.

I can't say for certain that it'll work for anyone wanting to sign out of their account and signing into a new one. But it does work for me.

Super happy that whatever steps we took to get 1.26.1 working in Catalina transferred over in Time Machine. Maybe that points to a better solution in the future?

As an update to this update, K4M is still downloading AZW files. But they are now DRM-protected and won't open in Calibre.

I don't know what changed. This was working two months ago, and I was able to switch between several accounts with no issue. No longer working with any account

lkmiller · 04-25-2020, 08:06 AM

AZW could still be KFX. Do you also see .res and .md files? Perhaps renderer-test got re-enabled?

smersh · 04-25-2020, 01:58 PM

no .res and .md files. Should they be there?

Tech Guy · 04-25-2020, 10:33 PM

I had failure to convert today for the first time. It seems that Kindle for PC updated itself, even though the checkbox to automatically update was not checked. Not sure how that happens, as it doesn't seem like they could change the behavior of an existing app.

smersh · 04-25-2020, 11:30 PM

Quote:

Originally Posted by Tech Guy

I had failure to convert today for the first time. It seems that Kindle for PC updated itself, even though the checkbox to automatically update was not checked. Not sure how that happens, as it doesn't seem like they could change the behavior of an existing app.

Mine didn't update. Still on 1.26.1. But maybe the AZW files that download have been modified?

lkmiller · 04-26-2020, 07:49 AM

Quote:

Originally Posted by smersh

no .res and .md files. Should they be there?

That would mean the books were KFX format. So it's not that renderer-test got re-enabled. Somehow your key must have changed. If you've had to log in again, that's usually a sign that the app is acting like it's a brand new installation with a different key.

04-13-2020, 12:40 PM	#737
bertofa Junior Member Posts: 4 Karma: 10 Join Date: Apr 2020 Device: Kindle PaperWhite	Not working I run Calibre 4.13 on a MacBook Pro 2017 13" with MacOS Catalina 10.15.4. I got the book ("I maestri invisibili", by Igor Sibaldi) from Amazon's Kindle store but the plugin in Calibre can't de-drm it This is the debug: Spoiler: Traceback (most recent call last): File "site-packages/calibre/gui2/ui.py", line 236, in initialize File "site-packages/calibre/gui2/actions/__init__.py", line 147, in do_genesis File "calibre_plugins.wikidata_gui.ui", line 774, in genesis ImportError: No module named wikidata.urlfixer calibre Log di debug calibre 4.13 embedded-python: True is64bit: True Darwin-19.4.0-x86_64-i386-64bit Darwin ('64bit', '') ('Darwin', '19.4.0', 'Darwin Kernel Version 19.4.0: Wed Mar 4 22:28:40 PST 2020; root:xnu-6153.101.6~15/RELEASE_X86_64') Python 2.7.16 OSX: ('10.15.4', ('', '', ''), 'x86_64') Interface language: it Successfully initialized third party plugins: Gather KFX-ZIP (from KFX Input) (1, 31, 0) && DeDRM (6, 7, 0) && Package KFX (from KFX Input) (1, 31, 0) && Kobo Books (1, 8, 0) && KFX metadata reader (from KFX Input) (1, 31, 0) && KFX Input (1, 31, 0) && Kindle hi-res covers (0, 4, 0) && EpubSplit (2, 9, 0) && Wikidata gui (1, 3, 0) && Amazon.com Multiple Countries (1, 0, 0) && Kindle Collections (1, 7, 24) && Quality Check (1, 9, 11) && INMONDADORI (0, 2, 1) && Set KFX metadata (from KFX Output) (1, 41, 0) && KFX Output (1, 41, 0) && Anobii Fetcher (1, 1, 0) && ANOBII (0, 4, 3) && Obok DeDRM (6, 7, 0) calibre 4.13 embedded-python: True is64bit: True Darwin-19.4.0-x86_64-i386-64bit Darwin ('64bit', '') ('Darwin', '19.4.0', 'Darwin Kernel Version 19.4.0: Wed Mar 4 22:28:40 PST 2020; root:xnu-6153.101.6~15/RELEASE_X86_64') Python 2.7.16 OSX: ('10.15.4', ('', '', ''), 'x86_64') Interface language: it Successfully initialized third party plugins: Gather KFX-ZIP (from KFX Input) (1, 31, 0) && DeDRM (6, 7, 0) && Package KFX (from KFX Input) (1, 31, 0) && Kobo Books (1, 8, 0) && KFX metadata reader (from KFX Input) (1, 31, 0) && KFX Input (1, 31, 0) && Kindle hi-res covers (0, 4, 0) && EpubSplit (2, 9, 0) && Wikidata gui (1, 3, 0) && Amazon.com Multiple Countries (1, 0, 0) && Kindle Collections (1, 7, 24) && Quality Check (1, 9, 11) && INMONDADORI (0, 2, 1) && Set KFX metadata (from KFX Output) (1, 41, 0) && KFX Output (1, 41, 0) && Anobii Fetcher (1, 1, 0) && ANOBII (0, 4, 3) && Obok DeDRM (6, 7, 0) devicePixelRatio: 2.0 logicalDpi: 72.0 x 72.0 physicalDpi: 128.000001922 x 127.500001915 Using calibre Qt style: True [0.00] Starting up... [0.02] Showing splash screen... [0.30] splash screen shown [0.30] Initializing db... [0.30] db initialized [0.31] Constructing main UI... Initializing wikidata gui preferences DEBUG: 0.0 obok::utilities.py - loading translations DEBUG: 0.0 obok::dialogs.py - loading translations DEBUG: 0.0 obok::config.py - loading translations DEBUG: 0.0 obok::action_err.py - loading translations Key u'A' for shortcut Apri la cartella contenente is already used by Aggiungi libri, ignoring [1.28] main UI initialized... [1.28] Hiding splash screen [18.04] splash screen hidden [18.04] Started up in 18.04 seconds with 39 books Unable to open device <calibre.devices.kindle.driver.KINDLE2 object at 0x1185c5fd0> Traceback (most recent call last): File "site-packages/calibre/gui2/device.py", line 201, in do_connect File "site-packages/calibre/devices/usbms/device.py", line 827, in open File "site-packages/calibre/devices/usbms/device.py", line 396, in open_osx File "site-packages/calibre/devices/usbms/device.py", line 386, in osx_bsd_names File "site-packages/calibre/devices/usbms/device.py", line 346, in _osx_bsd_names DeviceError: Could not detect BSD names for Kindle 2/3/4/Touch/PaperWhite/Voyage Device Interface. Try rebooting. Output from osx_get_usb_drives(): [] Connect to device failed, retrying in 5 seconds... Unable to open device <calibre.devices.kindle.driver.KINDLE2 object at 0x1185c5fd0> Traceback (most recent call last): File "site-packages/calibre/gui2/device.py", line 201, in do_connect File "site-packages/calibre/devices/usbms/device.py", line 827, in open File "site-packages/calibre/devices/usbms/device.py", line 396, in open_osx File "site-packages/calibre/devices/usbms/device.py", line 386, in osx_bsd_names File "site-packages/calibre/devices/usbms/device.py", line 346, in _osx_bsd_names DeviceError: Could not detect BSD names for Kindle 2/3/4/Touch/PaperWhite/Voyage Device Interface. Try rebooting. Output from osx_get_usb_drives(): [] Device connect failed again, giving up Unable to open device <calibre.devices.kindle.driver.KINDLE2 object at 0x1185c5fd0> Traceback (most recent call last): File "site-packages/calibre/gui2/device.py", line 201, in do_connect File "site-packages/calibre/devices/usbms/device.py", line 827, in open File "site-packages/calibre/devices/usbms/device.py", line 396, in open_osx File "site-packages/calibre/devices/usbms/device.py", line 386, in osx_bsd_names File "site-packages/calibre/devices/usbms/device.py", line 346, in _osx_bsd_names DeviceError: Could not detect BSD names for Kindle 2/3/4/Touch/PaperWhite/Voyage Device Interface. Try rebooting. Output from osx_get_usb_drives(): [] Connect to device failed, retrying in 5 seconds... Unable to open device <calibre.devices.kindle.driver.KINDLE2 object at 0x1185c5fd0> Traceback (most recent call last): File "site-packages/calibre/gui2/device.py", line 201, in do_connect File "site-packages/calibre/devices/usbms/device.py", line 827, in open File "site-packages/calibre/devices/usbms/device.py", line 396, in open_osx File "site-packages/calibre/devices/usbms/device.py", line 386, in osx_bsd_names File "site-packages/calibre/devices/usbms/device.py", line 346, in _osx_bsd_names DeviceError: Could not detect BSD names for Kindle 2/3/4/Touch/PaperWhite/Voyage Device Interface. Try rebooting. Output from osx_get_usb_drives(): [] Device connect failed again, giving up Unable to open device <calibre.devices.kindle.driver.KINDLE2 object at 0x1185c5fd0> Traceback (most recent call last): File "site-packages/calibre/gui2/device.py", line 201, in do_connect File "site-packages/calibre/devices/usbms/device.py", line 827, in open File "site-packages/calibre/devices/usbms/device.py", line 396, in open_osx File "site-packages/calibre/devices/usbms/device.py", line 386, in osx_bsd_names File "site-packages/calibre/devices/usbms/device.py", line 346, in _osx_bsd_names DeviceError: Could not detect BSD names for Kindle 2/3/4/Touch/PaperWhite/Voyage Device Interface. Try rebooting. Output from osx_get_usb_drives(): [] Connect to device failed, retrying in 5 seconds... Unable to open device <calibre.devices.kindle.driver.KINDLE2 object at 0x1185c5fd0> Traceback (most recent call last): File "site-packages/calibre/gui2/device.py", line 201, in do_connect File "site-packages/calibre/devices/usbms/device.py", line 827, in open File "site-packages/calibre/devices/usbms/device.py", line 396, in open_osx File "site-packages/calibre/devices/usbms/device.py", line 386, in osx_bsd_names File "site-packages/calibre/devices/usbms/device.py", line 346, in _osx_bsd_names DeviceError: Could not detect BSD names for Kindle 2/3/4/Touch/PaperWhite/Voyage Device Interface. Try rebooting. Output from osx_get_usb_drives(): [] Device connect failed again, giving up Unable to open device <calibre.devices.kindle.driver.KINDLE2 object at 0x1185c5fd0> Traceback (most recent call last): File "site-packages/calibre/gui2/device.py", line 201, in do_connect File "site-packages/calibre/devices/usbms/device.py", line 827, in open File "site-packages/calibre/devices/usbms/device.py", line 396, in open_osx File "site-packages/calibre/devices/usbms/device.py", line 386, in osx_bsd_names File "site-packages/calibre/devices/usbms/device.py", line 346, in _osx_bsd_names DeviceError: Could not detect BSD names for Kindle 2/3/4/Touch/PaperWhite/Voyage Device Interface. Try rebooting. Output from osx_get_usb_drives(): [] Connect to device failed, retrying in 5 seconds... Unable to open device <calibre.devices.kindle.driver.KINDLE2 object at 0x1185c5fd0> Traceback (most recent call last): File "site-packages/calibre/gui2/device.py", line 201, in do_connect File "site-packages/calibre/devices/usbms/device.py", line 827, in open File "site-packages/calibre/devices/usbms/device.py", line 396, in open_osx File "site-packages/calibre/devices/usbms/device.py", line 386, in osx_bsd_names File "site-packages/calibre/devices/usbms/device.py", line 346, in _osx_bsd_names DeviceError: Could not detect BSD names for Kindle 2/3/4/Touch/PaperWhite/Voyage Device Interface. Try rebooting. Output from osx_get_usb_drives(): [] Device connect failed again, giving up Unable to open device <calibre.devices.kindle.driver.KINDLE2 object at 0x1185c5fd0> Traceback (most recent call last): File "site-packages/calibre/gui2/device.py", line 201, in do_connect File "site-packages/calibre/devices/usbms/device.py", line 827, in open File "site-packages/calibre/devices/usbms/device.py", line 396, in open_osx File "site-packages/calibre/devices/usbms/device.py", line 386, in osx_bsd_names File "site-packages/calibre/devices/usbms/device.py", line 346, in _osx_bsd_names DeviceError: Could not detect BSD names for Kindle 2/3/4/Touch/PaperWhite/Voyage Device Interface. Try rebooting. Output from osx_get_usb_drives(): [] Connect to device failed, retrying in 5 seconds... {u'bsd_drives': {u'main': u'/dev/disk4'}, u'drives': {u'main': '/Volumes/Kindle'}, u'mount_map': {'/Applications/RightZoom/RightZoom.app': '/private/var/folders/lz/g8fl_g8j45j9ycgcfqj5wq4h0000gn/T/AppTranslocation/0ED40B18-2703-430E-B29E-864C771E1943', '/dev/disk1s1': '/System/Volumes/Data', '/dev/disk1s4': '/private/var/vm', '/dev/disk1s5': '/', '/dev/disk3s2': '/Volumes/Toshiba', '/dev/disk4': '/Volumes/Kindle', 'devfs': '/dev', 'map auto_home': '/System/Volumes/Data/home'}} Job: 0 Recupera informazioni sul dispositivo started DeviceJob: 0 Recupera informazioni sul dispositivo done, calling callback DeviceJob: 0 Recupera informazioni sul dispositivo callback returned Job: 1 Imposta informazioni sulla biblioteca started DeviceJob: 1 Imposta informazioni sulla biblioteca done, calling callback DeviceJob: 1 Imposta informazioni sulla biblioteca callback returned Job: 2 Recupera la lista dei libri del dispositivo started DEBUG: 0.0 USBMS: Fetching list of books from device. Device= KINDLE2 oncard= None DEBUG: 0.0 USBMS: dirs are: /Volumes/Kindle/ documents Job: 0 Recupera informazioni sul dispositivo finished Nessun dettaglio disponibile. Job: 1 Imposta informazioni sulla biblioteca finished Nessun dettaglio disponibile. DEBUG: 0.1 USBMS: scan from root False /Volumes/Kindle/documents DEBUG: 0.2 USBMS: count found in cache: 147, count of files in metadata: 147, need_sync: False DEBUG: 0.2 USBMS: Finished fetching list of books from device. oncard= None DEBUG: 0.2 USBMS: Fetching list of books from device. Device= KINDLE2 oncard= carda DEBUG: 0.2 USBMS: Fetching list of books from device. DeviGather KFX-ZIP (from KFX Input) 1.31.0: Importing /Volumes/Kindle/documents/Downloads/Items01/I maestri invisibili_ Come incontrare gli Spiriti guida_B071CN54MC.kfx Gather KFX-ZIP (from KFX Input): Gathered 4 file(s) as /var/folders/lz/g8fl_g8j45j9ycgcfqj5wq4h0000gn/C/calibre_4.13.0_tmp_89ICB6/BXhM2Q.kfx-zip DeDRM v6.7.0: Trying to decrypt BXhM2Q.kfx-zip ce= KINDLE2 oncard= cardb DeviceJob: 2 Recupera la lista dei libri del dispositivo done, calling callback DeviceJob: metadata_downloaded: Starting set_books_in_library DeviceJob: set_books_in_library: books to process= 147 DeviceJob: set_books_in_library finished: time= 0.00887680053711 DeviceJob: metadata_downloaded: updating views DeviceJob: metadata_downloaded: syncing DeviceJob: metadata_downloaded: refreshing ondevice DeviceJob: metadata_downloaded: sending metadata_available signal DeviceJob: 2 Recupera la lista dei libri del dispositivo callback returned Job: 2 Recupera la lista dei libri del dispositivo finished Nessun dettaglio disponibile. Using Library AlfCrypto Python Decrypting KFX-ZIP ebook: BXhM2Q Found 1 keys to try after 0.8 seconds Decrypting KFX DRM voucher: voucher DeDRM v6.7.0: Failed to decrypt with error: Failed to decrypt KFX DRM voucher with any key DeDRM v6.7.0: Looking for new default Kindle Key after 0.8 seconds No k4Mac kindle-info/rainier/kinf2011 files have been found. DeDRM v6.7.0: Ultimately failed to decrypt after 0.8 seconds. Read the FAQs at Harper's repository: https://github.com/apprenticeharper/...master/FAQs.md Running file type plugin DeDRM failed with traceback: Traceback (most recent call last): File "site-packages/calibre/customize/ui.py", line 172, in _run_filetype_plugins File "calibre_plugins.dedrm.__init__", line 625, in run File "calibre_plugins.dedrm.__init__", line 575, in KindleMobiDecrypt DeDRMError: DeDRM v6.7.0: Ultimately failed to decrypt after 0.8 seconds. Read the FAQs at Harper's repository: https://github.com/apprenticeharper/...master/FAQs.md Package KFX (from KFX Input) 1.31.0: Packaging /var/folders/lz/g8fl_g8j45j9ycgcfqj5wq4h0000gn/C/calibre_4.13.0_tmp_89ICB6/BXhM2Q.kfx-zip Processing container: CR!GJ1BWBR4AN66Z82DG6PQ1D8AYSM2.kfx Processing container: I maestri invisibili_ Come incontrare gli Spiriti guida_B071CN54MC.kfx Running file type plugin Package KFX (from KFX Input) failed with traceback: Traceback (most recent call last): File "site-packages/calibre/customize/ui.py", line 172, in _run_filetype_plugins File "calibre_plugins.kfx_input.package_filetype", line 21, in run File "calibre_plugins.kfx_input.package_filetype", line 33, in run_kfx File "calibre_plugins.kfx_input.kfxlib.yj_book", line 87, in convert_to_single_kfx File "calibre_plugins.kfx_input.kfxlib.yj_book", line 160, in decode_book File "calibre_plugins.kfx_input.kfxlib.yj_book", line 267, in get_container KFXDRMError: Book container I maestri invisibili_ Come incontrare gli Spiriti guida_B071CN54MC.kfx has DRM and cannot be converted KFX metadata reader (from KFX Input) activated for /var/folders/lz/g8fl_g8j45j9ycgcfqj5wq4h0000gn/C/calibre_4.13.0_tmp_89ICB6/7QSEI6_add_books/0/I maestri invisibili_ Come incontrare gli Spiriti guida_B071CN54MC.kfx-zip Added I maestri invisibili: Come incontrare gli Spiriti guida (Italian Edition) to db in: 0.0 Added 1 books in 1.8 seconds Thanks a lot in advance for any help Last edited by theducks; 04-13-2020 at 01:13 PM. Reason: Please use Spoiler tags for logs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Handling KFX files in Calibre	HarryT	Conversion	53	08-31-2018 04:21 AM
Dealing with Kindle for PC/Mac 1.19 and KFX in calibre	BetterRed	Conversion	0	02-08-2017 01:47 PM
Dealing with Kindle ebooks in calibre	BetterRed	Devices	0	02-06-2017 07:59 PM
updated calibre with a little help for kfx format	cvkemp	Amazon Kindle	0	10-06-2015 11:08 AM
Dealing with Multiple Calibre libraries	samoanbiscuit	Calibre Companion	4	08-27-2014 10:35 AM

04-03-2020, 07:33 AM	#736
jonn.doe Member Posts: 12 Karma: 10 Join Date: Oct 2019 Device: Likebook Mars	Found the problem - not the firewall. I installed virtualbox and the network driver creates a proxy that confused the kindle prog. Weird. So just disabled the network driver bye open network & internet settings - change adapter settings and disable virtual host only adapter. Very strange. And no the kindle prog wasn't using a proxy either...

04-14-2020, 01:37 AM	#741
lkmiller Laura Posts: 1,574 Karma: 23597272 Join Date: Nov 2009 Device: Kobo Sage, Kobo Elipsa, Nook Glowlight 4 Plus, Kindle Oasis 2	I suggest looking at Method 3 in the first post.

04-17-2020, 11:06 AM	#742
bertofa Junior Member Posts: 4 Karma: 10 Join Date: Apr 2020 Device: Kindle PaperWhite	Sorry. I was not intentionally wrong.

04-25-2020, 08:06 AM	#746
lkmiller Laura Posts: 1,574 Karma: 23597272 Join Date: Nov 2009 Device: Kobo Sage, Kobo Elipsa, Nook Glowlight 4 Plus, Kindle Oasis 2	AZW could still be KFX. Do you also see .res and .md files? Perhaps renderer-test got re-enabled?

04-25-2020, 01:58 PM	#747
smersh Member Posts: 10 Karma: 10 Join Date: Oct 2019 Device: kindle paperwhite	no .res and .md files. Should they be there?

04-25-2020, 10:33 PM	#748
Tech Guy Leftcoast, USA Posts: 38 Karma: 500010 Join Date: Dec 2012 Location: SF Bay Area Device: Pixel 2 XL, Basic Kindle	I had failure to convert today for the first time. It seems that Kindle for PC updated itself, even though the checkbox to automatically update was not checked. Not sure how that happens, as it doesn't seem like they could change the behavior of an existing app.