09-05-2010, 09:21 AM | #1 |
Addict
Posts: 317
Karma: 816
Join Date: Aug 2010
Location: Mecklenburg-Vorpommern
Device: Kindle DX graphite
|
Aufbewahrungsbox für große Ebook-Reader
Ein Ebook-Reader ist flach und leicht und leider auch zerbrechlich. Ein Ledercover reicht mir bei 9,7" nicht aus.
Ich habe mir so etwas hier besorgt: http://cgi.ebay.de/ws/eBayISAPI.dll?...=STRK:MEWAX:IT Bei Ebay, ist B-Ware, aber das juckte mich nicht. Für 12,70 Euro inklusive Versand ist das ok. Innenabmessungen: Länge x Breite x Höhe 350 x 225 x 24 mm Da passt mein Wunschreader das Pocketbook 902 mit etwas Auspolsterung gut rein. Auch ein Kindle DX mit 264 × 183 × 10 mm hat ausreichend Platz. Dank 6mm an den Seiten und 3mm für Boden/Deckel dürfte das ganze den Reader gut schützen. Erst wollte ich ja so etwas selbst bauen, aber so gut bekommt man es meistens nicht hin und für den Preis. Dürfte immer noch gut in den Rucksack passen, weil mit 24mm ist das auch nicht besonders dick. Wer auch so etwas möchte "Vorsicht" bei den Abmessungen. Die Dinger sehen gleich aus, sind aber unterschiedlich groß. Das ist für Schriftstücke gedacht (wie praktisch). Ich weiß nur nicht genau wie man noch dazu sagt. Bin mir aber sicher das ich auch mal Architekten mit so etwas gesehen habe. |
09-05-2010, 09:23 AM | #2 |
The one and only
Posts: 3,302
Karma: 535819
Join Date: Oct 2008
Location: Berlin, Germany
Device: yup!
|
Gute Idee!
|
Advert | |
|
09-05-2010, 11:45 AM | #3 |
Early Adopter
Posts: 3,161
Karma: 3534948
Join Date: Oct 2008
Location: hier und da
Device: einige
|
Vielleicht passen auch noch ein paar Zigarren hinein
|
09-05-2010, 12:18 PM | #4 |
Addict
Posts: 317
Karma: 816
Join Date: Aug 2010
Location: Mecklenburg-Vorpommern
Device: Kindle DX graphite
|
Nee lieber nicht, muss schon mindestens 1 im Jahr 1h beim Facharzt rum sitzen um danach zur Lungenprüfung in die Kabine zu müssen. Deswegen ja der Reader um genau solchen Gelegenheiten und der "üpigen" Zeitschriftenauswahl mal was entgegen zu setzen. Ich bin auf die neugierigen Blicke gespannt, weil es ist doch immer voll und Spiegel und Co. sind natürlich vergriffen, obwohl das auch nicht wirklich was für 1h ist.
Ich habe mir schon mal ein Pocketbook 902 aus Papier gebastelt, dass darf dann Probe liegen, wenn die Box was taugt gibt es Fotos, wenn nicht dann nicht P.S. Den Smiley habe ich natürlich verstanden. Last edited by Passepartout; 09-05-2010 at 12:21 PM. |
09-06-2010, 12:46 AM | #5 |
Addict
Posts: 317
Karma: 816
Join Date: Aug 2010
Location: Mecklenburg-Vorpommern
Device: Kindle DX graphite
|
Und schon wieder ein Reader mit Glasbruch - aber darum geht es nicht.
(Gefunden bei Suche zu neuen Infos von Pocketbook) Guckt euch mal das Bild an - das ist genial. http://translate.google.de/translate...r:d%26prmd%3Ds Genau hin gucken, dass ist ein Kopf mit 2 Augen und das alles aus Büchern. Last edited by Passepartout; 09-06-2010 at 12:53 AM. |
Advert | |
|
09-06-2010, 02:05 AM | #6 |
Early Adopter
Posts: 3,161
Karma: 3534948
Join Date: Oct 2008
Location: hier und da
Device: einige
|
Sehr hübsch! Das könnte doch dein Avatar werden.
|
09-06-2010, 03:16 AM | #7 |
Addict
Posts: 317
Karma: 816
Join Date: Aug 2010
Location: Mecklenburg-Vorpommern
Device: Kindle DX graphite
|
|
09-06-2010, 03:21 AM | #8 |
Early Adopter
Posts: 3,161
Karma: 3534948
Join Date: Oct 2008
Location: hier und da
Device: einige
|
|
09-06-2010, 08:49 AM | #9 |
Wizard
Posts: 3,130
Karma: 91256
Join Date: Feb 2008
Location: Germany
Device: Cybook Gen3
|
Mir fielen, passend zum Originalthema, noch Otter Boxen und Pelican Koffer ein. Ich dachte, dass die bestimmt auch irgendwas für den Kindle im Angebot haben, scheint aber nach flüchtigem drübergucken nicht der Fall zu sein. Naja, vielleicht interessiert es trotzdem jemanden.
|
09-07-2010, 01:40 PM | #10 |
Addict
Posts: 317
Karma: 816
Join Date: Aug 2010
Location: Mecklenburg-Vorpommern
Device: Kindle DX graphite
|
Es gibt für den Kindle sehr wohl so etwas, auch sehr stabil (und schön teuer):
http://www.youtube.com/watch?v=CQUdIEZFzug (Ja ich weiß, im Moment habe ich nichts anderes wie E-Reader im Kopf) Meine Ebook-Hülle ist da: Als heute der Karton ankam hier noch mal der Ebay-Shophttp://stores.ebay.de/Naturlich-gut-verpackt (Eventuell findet man da noch was) Ich hatte nach Holzbox gesucht. Als heute das Paket ankam dachte ich "was ist da drin? Papier?" das Ding wiegt fast nichts geschätzte 250g vielleicht. Auf jeden Fall weniger wie mein aktuelles Taschenbuch. Nach dem auspacken dann "ist ja schön, mit Magnetverschluss, schön, schön handlich schön flach. Ja Volltreffer für den Preis. Umhüllt war das ganze von viel Schaumstoff ca. 5mm dick, dass könnte ich als Einlage benutzen. Das Papier soll meine Wunschhalterung für den Reader da stellen, da muss ich noch etwas grübeln wie ich das realisiere. Ist ja noch Zeit. Wenn dann wollte ich es so machen, dass man es in der Größe anpassen kann (kann ja sein das man da mal was ändern möchte, naja mal gucken. Auf jeden Fall ist das für den Preis der perfekte Schutz für mich. Sieht schick aus, vermutet niemand einen teuren E-Book-Reader drin und hält dann auch noch was aus. Ich bin zufrieden. Selbst gebastelt hätte ich das in der Qualität nicht und der Versand ist innerhalb von 2 Tagen sehr schnell (vom einem Ende Deutschlands zum anderen). Achja das ist kein echter, dass ist mein Papier-Pocketbook-Pro 902. Der ist weil Marke selbst gebastelt Die höhe zieht mit dem Original gleich 11mm. Last edited by Passepartout; 09-07-2010 at 01:46 PM. |
09-09-2010, 11:38 AM | #11 |
Addict
Posts: 317
Karma: 816
Join Date: Aug 2010
Location: Mecklenburg-Vorpommern
Device: Kindle DX graphite
|
Ein bisschen verschönert. Ob ich noch Text auf den Buchrücken machen ist offen, genauso könne ich den Rest des Platzes mit ein paar Schicken Strichzeichnungen (Google mein Freund und Helfer) verschönern - eure Meinung?
Vorgezeichnet mit CD/DVD Maker - hatte sonst nichts wasserfestes und dann mit Lötkolben leicht graviert, sieht ganz gut aus und im Licht erscheint das ganze dadurch noch mal ganz anders. (Nach der Anzeichnung) (Nach dem Lötkolben-Einsatz - habe nichts anderes ging ganz gut) (Ein wenig mit der Belichtung im RAW-Programm rum gespielt um die Konturen hervor zu heben) ...das Schwärzliche sind die Überreste der Anzeichnung, nicht des Lötkolbens, dass muss man wissen, wenn man ähnliches vor hat. Darunter kommt das normale Holz in Natur zum Vorschein, sieht durch schwarz, natur, Mahagoni-Ton richtig gut aus. Last edited by Passepartout; 09-09-2010 at 11:41 AM. |
09-17-2010, 03:57 PM | #12 |
Addict
Posts: 317
Karma: 816
Join Date: Aug 2010
Location: Mecklenburg-Vorpommern
Device: Kindle DX graphite
|
Soweit ist es jetzt innen und außen fertig.
Mit der Beschriftung bin ich noch am grübeln mit mir. Ändern kann ich es nicht mehr (es sei denn ich schleife es ab). Ich brauche mal etwas "Kritiken" also Meinungen dazu. Ohne Beschriftung sah es für mich irgendwie nicht fertig aus. Druckbuchstaben sind nicht meine Stärke und eine Laserhand habe ich auch nicht. Mit Schrift sieht es für mich besser aus. Hmmm. Meinungen erwünscht. Innenleben ist wie folgt gedacht: Klettband, dadurch bin ich flexibel, ich kann jede Seite raus nehmen und doch ist es fest, wenn ich den Deckel (mit Schaumstoff beklebt) zu mache, dann sitzt da drin alles fest. Man sieht, dass es je nach Licht und Blickwinkel immer anders aussieht. |
09-18-2010, 07:42 AM | #13 | |
Currently Reading
Posts: 4,377
Karma: 6427165
Join Date: Nov 2009
Location: Germany
Device: Kobo, Tolino, Kindle, Pocketbook, Sony
|
Quote:
Das scheint mir auch so, aber du bist auf jeden Fall kreativ. Ich bin schon mal gespannt, wie das ganze dann mit echtem Reader aussieht. Den anderen, kannst du dann ja bei Ebay reinsetzten, als ökologisch abbaubarer Ebook-Reader-Platzhalter. |
|
09-20-2010, 06:59 AM | #14 |
Addict
Posts: 317
Karma: 816
Join Date: Aug 2010
Location: Mecklenburg-Vorpommern
Device: Kindle DX graphite
|
Hihi der war gut - gibt ja genug Leute die "Verpackungen" bei Ebay verkaufen und dann gibt es ganz fixe Ebayer die nicht lesen und denken sie bekommen die Super-Duper-Grafikkarte und Co.
Last edited by Passepartout; 09-20-2010 at 01:15 PM. |
11-05-2010, 09:58 AM | #15 |
Zealot
Posts: 107
Karma: 360
Join Date: May 2009
Location: Hessen
Device: K4NT
|
Hi,
der Thread ist zwar schon ein bisschen älter, aber trotzdem: nimn zum auspolstern das Material von einer Iso-Matte, lässt sich super mit einem scharfen Messer zuschneiden und du hast nicht überall Styropor-Kügelchen herumfliegen. Mit Geschick kannst du es aus einem Stück fertigen, gelingt das nicht: mit Heisskleber kann man es prima zusammenfügen. Gruß Ralph |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Brauche Kaufberatung für 1. Ebook-Reader? | Yandra | Erste Hilfe | 57 | 01-21-2011 04:02 PM |
Wichtigste Kriterien für eBook-Reader-Vergleich | netseeker | Deutsches Forum | 26 | 07-13-2010 01:05 PM |
JAVA-eBook-Reader für Handys? | Zel | Software | 11 | 06-21-2010 09:26 PM |
gibt es den perfekten eBook-Reader für mich? | Ataraxia | Erste Hilfe | 6 | 05-25-2010 09:54 AM |
Ist ein eBook Reader was für mich? | Shyne | Erste Hilfe | 11 | 02-16-2010 04:02 PM |