Instructions for patching firmware 3.12.0 - Page 6

GeoffR · 12-17-2014, 01:23 PM

Quote:

Originally Posted by npr

I suspect this method can fix my pet issue of marks on the bottom of the page if only the patch can be made to add padding to a page in place of just to a paragraph.

Unfortunately there is no way to add padding to a page. There is a @page rule that can be used to set the page margin, but it can't be used to add padding. The other problem is that the kepub reader totally ignores the @page rule anyway!

But here is a patch if you want to test it for yourself:

Spoiler:

Code:

<Patch>
patch_name = `Add kepub @page margin (doesn't work, kepub reader ignores @page)`
patch_enable = `yes`
#
# This patch adds the following line to the built-in kepub stylesheet:
#
#   @page{margin: 25px 25px 25px 25px!important}
#
replace_string = DB4470, `.\x00K\x00B\x00H\x00i\x00g\x00h\x00l\x00i\x00g\x00h\x00t\x00i\x00n\x00g\x00 \x00{\x00 \x00b\x00a\x00c\x00k\x00g\x00r\x00o\x00u\x00n\x00d\x00-\x00c\x00o\x00l\x00o\x00r\x00:\x00 \x00#\x00C\x006\x00C\x006\x00C\x006\x00 \x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00 \x00}\x00 \x00\t\x00`, `.\x00K\x00B\x00H\x00i\x00g\x00h\x00l\x00i\x00g\x00h\x00t\x00i\x00n\x00g\x00{\x00b\x00a\x00c\x00k\x00g\x00r\x00o\x00u\x00n\x00d\x00-\x00c\x00o\x00l\x00o\x00r\x00:\x00#\x00C\x006\x00C\x006\x00C\x006\x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00}\x00.\x00K\x00B\x00S\x00t\x00a\x00c\x00`
#
replace_string = DB44E6, `.\x00K\x00B\x00S\x00t\x00a\x00c\x00k\x00K\x00e\x00y\x00w\x00o\x00r\x00d\x00,\x00 \x00.\x00K\x00B\x00S\x00e\x00a\x00r\x00c\x00h\x00R\x00e\x00s\x00u\x00l\x00t\x00,\x00 \x00.\x00K\x00B\x00A\x00n\x00n\x00o\x00t\x00a\x00t\x00i\x00o\x00n\x00,\x00 \x00.\x00K\x00B\x00H\x00i\x00g\x00h\x00l\x00i\x00g\x00h\x00t\x00i\x00n\x00g\x00 \x00,\x00 \x00K\x00B\x00A\x00u\x00t\x00h\x00o\x00r\x00A\x00n\x00n\x00o\x00t\x00a\x00t\x00i\x00o\x00n\x00{\x00 \x00f\x00o\x00n\x00t\x00-\x00s\x00i\x00z\x00e\x00:\x00 \x001\x000\x000\x00%\x00 \x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00 \x00-\x00w\x00e\x00b\x00k\x00i\x00t\x00-\x00t\x00e\x00x\x00t\x00-\x00c\x00o\x00m\x00b\x00i\x00n\x00e\x00:\x00 \x00i\x00n\x00h\x00e\x00r\x00i\x00t\x00 \x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00 \x00}\x00 \x00\t\x00`, `k\x00K\x00e\x00y\x00w\x00o\x00r\x00d\x00,\x00.\x00K\x00B\x00S\x00e\x00a\x00r\x00c\x00h\x00R\x00e\x00s\x00u\x00l\x00t\x00,\x00.\x00K\x00B\x00A\x00n\x00n\x00o\x00t\x00a\x00t\x00i\x00o\x00n\x00,\x00.\x00K\x00B\x00H\x00i\x00g\x00h\x00l\x00i\x00g\x00h\x00t\x00i\x00n\x00g\x00,\x00 \x00K\x00B\x00A\x00u\x00t\x00h\x00o\x00r\x00A\x00n\x00n\x00o\x00t\x00a\x00t\x00i\x00o\x00n\x00{\x00f\x00o\x00n\x00t\x00-\x00s\x00i\x00z\x00e\x00:\x001\x000\x000\x00%\x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00-\x00w\x00e\x00b\x00k\x00i\x00t\x00-\x00t\x00e\x00x\x00t\x00-\x00c\x00o\x00m\x00b\x00i\x00n\x00e\x00:\x00i\x00n\x00h\x00e\x00r\x00i\x00t\x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00}\x00.\x00K\x00B\x00S\x00e\x00a\x00r\x00c\x00h\x00R\x00e\x00s\x00u\x00l\x00t\x00{\x00b\x00a\x00c\x00k\x00`
#
replace_string = DB4626, `.\x00K\x00B\x00S\x00e\x00a\x00r\x00c\x00h\x00R\x00e\x00s\x00u\x00l\x00t\x00 \x00{\x00 \x00b\x00a\x00c\x00k\x00g\x00r\x00o\x00u\x00n\x00d\x00-\x00c\x00o\x00l\x00o\x00r\x00:\x00 \x00#\x00C\x006\x00C\x006\x00C\x006\x00 \x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00 \x00}\x00 \x00\t\x00`, `g\x00r\x00o\x00u\x00n\x00d\x00-\x00c\x00o\x00l\x00o\x00r\x00:\x00#\x00C\x006\x00C\x006\x00C\x006\x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00}\x00.\x00K\x00B\x00S\x00t\x00a\x00c\x00k\x00K\x00e\x00y\x00w\x00o\x00r\x00d\x00 \x00a\x00{\x00c\x00o\x00l\x00o\x00r\x00:\x00b\x00l\x00a\x00`
#
replace_string = DB469C, `.\x00K\x00B\x00S\x00t\x00a\x00c\x00k\x00K\x00e\x00y\x00w\x00o\x00r\x00d\x00 \x00a\x00 \x00{\x00 \x00c\x00o\x00l\x00o\x00r\x00:\x00 \x00b\x00l\x00a\x00c\x00k\x00 \x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00 \x00}\x00 \x00\t\x00`, `c\x00k\x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00}\x00.\x00K\x00B\x00A\x00u\x00t\x00h\x00o\x00r\x00A\x00n\x00n\x00o\x00t\x00a\x00t\x00i\x00o\x00n\x00,\x00.\x00K\x00B\x00A\x00u\x00t\x00h\x00o\x00r\x00A\x00n\x00n\x00o\x00t\x00`
#
replace_string = DB46FC, `.\x00K\x00B\x00A\x00u\x00t\x00h\x00o\x00r\x00A\x00n\x00n\x00o\x00t\x00a\x00t\x00i\x00o\x00n\x00,\x00 \x00.\x00K\x00B\x00A\x00u\x00t\x00h\x00o\x00r\x00A\x00n\x00n\x00o\x00t\x00a\x00t\x00i\x00o\x00n\x00C\x00o\x00n\x00t\x00i\x00n\x00u\x00e\x00d\x00 \x00{\x00 \x00b\x00a\x00c\x00k\x00g\x00r\x00o\x00u\x00n\x00d\x00-\x00c\x00o\x00l\x00o\x00r\x00:\x00 \x00t\x00r\x00a\x00n\x00s\x00p\x00a\x00r\x00e\x00n\x00t\x00 \x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00 \x00t\x00e\x00x\x00t\x00-\x00d\x00e\x00c\x00o\x00r\x00a\x00t\x00i\x00o\x00n\x00:\x00 \x00n\x00o\x00n\x00e\x00 \x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00 \x00}\x00 \x00\t\x00`, `a\x00t\x00i\x00o\x00n\x00C\x00o\x00n\x00t\x00i\x00n\x00u\x00e\x00d\x00{\x00b\x00a\x00c\x00k\x00g\x00r\x00o\x00u\x00n\x00d\x00-\x00c\x00o\x00l\x00o\x00r\x00:\x00t\x00r\x00a\x00n\x00s\x00p\x00a\x00r\x00e\x00n\x00t\x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00t\x00e\x00x\x00t\x00-\x00d\x00e\x00c\x00o\x00r\x00a\x00t\x00i\x00o\x00n\x00:\x00n\x00o\x00n\x00e\x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00}\x00.\x00K\x00B\x00S\x00t\x00a\x00c\x00k\x00K\x00e\x00y\x00w\x00o\x00r\x00d\x00[\x00w\x00r\x00i\x00t\x00i\x00n\x00g\x00M\x00o\x00d\x00e\x00=\x00"\x00h\x00o\x00r\x00i\x00z\x00o\x00n\x00t\x00a\x00l\x00-\x00t\x00b\x00"\x00]\x00 \x00`
#
replace_string = DB4802, `.\x00K\x00B\x00S\x00t\x00a\x00c\x00k\x00K\x00e\x00y\x00w\x00o\x00r\x00d\x00[\x00w\x00r\x00i\x00t\x00i\x00n\x00g\x00M\x00o\x00d\x00e\x00=\x00"\x00h\x00o\x00r\x00i\x00z\x00o\x00n\x00t\x00a\x00l\x00-\x00t\x00b\x00"\x00]\x00 \x00a\x00 \x00{\x00 \x00b\x00o\x00r\x00d\x00e\x00r\x00-\x00b\x00o\x00t\x00t\x00o\x00m\x00:\x00 \x001\x00p\x00x\x00 \x00s\x00o\x00l\x00i\x00d\x00 \x00b\x00l\x00a\x00c\x00k\x00 \x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00 \x00}\x00 \x00\t\x00`, `a\x00{\x00b\x00o\x00r\x00d\x00e\x00r\x00-\x00b\x00o\x00t\x00t\x00o\x00m\x00:\x001\x00p\x00x\x00 \x00s\x00o\x00l\x00i\x00d\x00 \x00b\x00l\x00a\x00c\x00k\x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00}\x00 \x00.\x00K\x00B\x00A\x00u\x00t\x00h\x00o\x00r\x00A\x00n\x00n\x00o\x00t\x00a\x00t\x00i\x00o\x00n\x00[\x00w\x00r\x00i\x00t\x00i\x00n\x00g\x00M\x00o\x00d\x00e\x00=\x00"\x00h\x00o\x00r\x00i\x00z\x00o\x00n\x00t\x00a\x00l\x00-\x00t\x00b\x00"\x00]\x00,\x00.\x00K\x00`
#
replace_string = DB48C0, `.\x00K\x00B\x00A\x00u\x00t\x00h\x00o\x00r\x00A\x00n\x00n\x00o\x00t\x00a\x00t\x00i\x00o\x00n\x00[\x00w\x00r\x00i\x00t\x00i\x00n\x00g\x00M\x00o\x00d\x00e\x00=\x00"\x00h\x00o\x00r\x00i\x00z\x00o\x00n\x00t\x00a\x00l\x00-\x00t\x00b\x00"\x00]\x00,\x00 \x00.\x00K\x00B\x00A\x00u\x00t\x00h\x00o\x00r\x00A\x00n\x00n\x00o\x00t\x00a\x00t\x00i\x00o\x00n\x00C\x00o\x00n\x00t\x00i\x00n\x00u\x00e\x00d\x00[\x00w\x00r\x00i\x00t\x00i\x00n\x00g\x00M\x00o\x00d\x00e\x00=\x00"\x00h\x00o\x00r\x00i\x00z\x00o\x00n\x00t\x00a\x00l\x00-\x00t\x00b\x00"\x00]\x00 \x00{\x00 \x00b\x00o\x00r\x00d\x00e\x00r\x00-\x00b\x00o\x00t\x00t\x00o\x00m\x00:\x00 \x002\x00p\x00x\x00 \x00d\x00o\x00t\x00t\x00e\x00d\x00 \x00b\x00l\x00a\x00c\x00k\x00 \x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00 \x00}\x00 \x00\t\x00`, `B\x00A\x00u\x00t\x00h\x00o\x00r\x00A\x00n\x00n\x00o\x00t\x00a\x00t\x00i\x00o\x00n\x00C\x00o\x00n\x00t\x00i\x00n\x00u\x00e\x00d\x00[\x00w\x00r\x00i\x00t\x00i\x00n\x00g\x00M\x00o\x00d\x00e\x00=\x00"\x00h\x00o\x00r\x00i\x00z\x00o\x00n\x00t\x00a\x00l\x00-\x00t\x00b\x00"\x00]\x00{\x00b\x00o\x00r\x00d\x00e\x00r\x00-\x00b\x00o\x00t\x00t\x00o\x00m\x00:\x002\x00p\x00x\x00 \x00d\x00o\x00t\x00t\x00e\x00d\x00 \x00b\x00l\x00a\x00c\x00k\x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00}\x00.\x00K\x00B\x00A\x00n\x00n\x00o\x00t\x00a\x00t\x00i\x00o\x00n\x00[\x00w\x00r\x00i\x00t\x00i\x00n\x00g\x00M\x00o\x00d\x00e\x00=\x00"\x00h\x00o\x00r\x00i\x00z\x00o\x00n\x00t\x00a\x00l\x00-\x00t\x00b\x00"\x00]\x00,\x00.\x00K\x00B\x00A\x00n\x00n\x00o\x00t\x00a\x00t\x00i\x00o\x00n\x00C\x00o\x00n\x00`
#
replace_string = DB49FA, `.\x00K\x00B\x00A\x00n\x00n\x00o\x00t\x00a\x00t\x00i\x00o\x00n\x00[\x00w\x00r\x00i\x00t\x00i\x00n\x00g\x00M\x00o\x00d\x00e\x00=\x00"\x00h\x00o\x00r\x00i\x00z\x00o\x00n\x00t\x00a\x00l\x00-\x00t\x00b\x00"\x00]\x00,\x00 \x00.\x00K\x00B\x00A\x00n\x00n\x00o\x00t\x00a\x00t\x00i\x00o\x00n\x00C\x00o\x00n\x00t\x00i\x00n\x00u\x00e\x00d\x00[\x00w\x00r\x00i\x00t\x00i\x00n\x00g\x00M\x00o\x00d\x00e\x00=\x00"\x00h\x00o\x00r\x00i\x00z\x00o\x00n\x00t\x00a\x00l\x00-\x00t\x00b\x00"\x00]\x00 \x00{\x00 \x00b\x00o\x00r\x00d\x00e\x00r\x00-\x00b\x00o\x00t\x00t\x00o\x00m\x00:\x00 \x002\x00p\x00x\x00 \x00s\x00o\x00l\x00i\x00d\x00 \x00b\x00l\x00a\x00c\x00k\x00 \x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00 \x00}\x00 \x00\t\x00`, `t\x00i\x00n\x00u\x00e\x00d\x00[\x00w\x00r\x00i\x00t\x00i\x00n\x00g\x00M\x00o\x00d\x00e\x00=\x00"\x00h\x00o\x00r\x00i\x00z\x00o\x00n\x00t\x00a\x00l\x00-\x00t\x00b\x00"\x00]\x00{\x00b\x00o\x00r\x00d\x00e\x00r\x00-\x00b\x00o\x00t\x00t\x00o\x00m\x00:\x002\x00p\x00x\x00 \x00s\x00o\x00l\x00i\x00d\x00 \x00b\x00l\x00a\x00c\x00k\x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00}\x00.\x00K\x00B\x00S\x00t\x00a\x00c\x00k\x00K\x00e\x00y\x00w\x00o\x00r\x00d\x00[\x00w\x00r\x00i\x00t\x00i\x00n\x00g\x00M\x00o\x00d\x00e\x00=\x00"\x00v\x00e\x00r\x00t\x00i\x00c\x00a\x00l\x00-\x00r\x00l\x00"\x00]\x00 \x00a\x00{\x00b\x00o\x00r\x00d\x00e\x00r\x00-\x00r\x00i\x00g\x00h\x00t\x00:\x001\x00p\x00x\x00 \x00s\x00o\x00l\x00i\x00d\x00 \x00`
#
replace_string = DB4B1A, `.\x00K\x00B\x00S\x00t\x00a\x00c\x00k\x00K\x00e\x00y\x00w\x00o\x00r\x00d\x00[\x00w\x00r\x00i\x00t\x00i\x00n\x00g\x00M\x00o\x00d\x00e\x00=\x00"\x00v\x00e\x00r\x00t\x00i\x00c\x00a\x00l\x00-\x00r\x00l\x00"\x00]\x00 \x00a\x00 \x00{\x00 \x00b\x00o\x00r\x00d\x00e\x00r\x00-\x00r\x00i\x00g\x00h\x00t\x00:\x00 \x001\x00p\x00x\x00 \x00s\x00o\x00l\x00i\x00d\x00 \x00b\x00l\x00a\x00c\x00k\x00 \x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00;\x00 \x00}\x00 \x00\t\x00`, `b\x00l\x00a\x00c\x00k\x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00}\x00 \x00@\x00p\x00a\x00g\x00e\x00{\x00m\x00a\x00r\x00g\x00i\x00n\x00:\x00 \x002\x005\x00p\x00x\x00 \x002\x005\x00p\x00x\x00 \x002\x005\x00p\x00x\x00 \x002\x005\x00p\x00x\x00!\x00i\x00m\x00p\x00o\x00r\x00t\x00a\x00n\x00t\x00}\x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00 \x00`
#
# Fix typo in annotations styles: KBAuthorAnnotation --> .KBAuthorAnnotation
replace_string = DB4554, `\x20`, `.`
#
</Patch>

I think the only solution to your problem is to add padding between the lines, i.e. increase the line spacing. (other than using the epub reader instead, which works with much smaller line spacing settings than the kepub reader).

npr · 12-17-2014, 01:53 PM

Yes I have tried this patch and yes you're right it doesn't work, but thank for trying.

My present solution is to modify the line spacing in your patch to remove the smaller spacings which cause the worst of this issue. At least it makes it easier for me to find a suitable font size / line size setting.
eg:
# 15 values for replacement
replace_float = 6C3BC0, 1.0, 0.82
replace_float = 6C3C88, 1.05, 0.83
replace_float = 6C3C90, 1.07, 0.84
replace_float = 6C3C98, 1.1, 0.85
replace_float = 6C3BC8, 1.2, 0.86
replace_float = 6C3CA0, 1.35, 0.87
replace_float = 6C3BD0, 1.5, 0.88
replace_float = 6C3CA8, 1.7, 0.89
replace_float = 6C3CB0, 1.8, 0.9
replace_float = 6C3BD8, 2.0, 0.92
replace_float = 6C3CB8, 2.2, 0.94
replace_float = 6C3CC0, 2.4, 0.97
replace_float = 6C3CC8, 2.6, 1.0
replace_float = 6C3CD0, 2.8, 1.05
replace_float = 6C3BE0, 3.0, 1.1

ewphoenix123 · 12-17-2014, 03:40 PM

Quote:

Originally Posted by GeoffR

Unfortunately there is no way to add padding to a page. There is a @page rule that can be used to set the page margin, but it can't be used to add padding. The other problem is that the kepub reader totally ignores the @page rule anyway!

I think the only solution to your problem is to add padding between the lines, i.e. increase the line spacing. (other than using the epub reader instead, which works with much smaller line spacing settings than the kepub reader).

That's to bad. Other then that it's working great. But I need my small linespacing to be happy.

Might something like this work?

* {
box-sizing: border-box;
width: 100%;
border: 0.2px solid white;
}

scoky · 12-17-2014, 09:01 PM

Quote:

Originally Posted by GeoffR

Thanks! I've updated the `all kepubs` patches in post #57 with this change.

BTW, I have been distinguishing between synced and sideloaded kepubs, but really the difference is between Kobo-created kepubs and other kepubs. If you were to sideload a Kobo-created kepub (say by syncing it to the desktop, removing DRM, and sideloading it to the ereader), then it would work just the same as a synced kepub.

it seems that this kind of setting like body>p can't cover all sideloads kepub. I tested, some books work well and some not.

makara · 12-18-2014, 06:37 AM

I can not make a patch for Aura HD using Mac. I think a little experience. Can anybody help me?

frostschutz · 12-18-2014, 09:35 AM

Have you ever tried/considered porting this to the Kobo so the device would patch itself after placing patch files in the USB storage?

erikssenmar867 · 12-18-2014, 05:37 PM

geoffr thank you very much for your patch and your disponibility

GeoffR · 12-18-2014, 07:01 PM

Quote:

Originally Posted by scoky

it seems that this kind of setting like body>p can't cover all sideloads kepub. I tested, some books work well and some not.

Is increasing the padding from 0.1em to 0.2em enough to fix it? Sone fonts will need more padding than others.

Quote:

Originally Posted by frostschutz

Have you ever tried/considered porting this to the Kobo so the device would patch itself after placing patch files in the USB storage?

That's an interesting idea, it would have the advantage of avoiding any possibility of using the wrong firmware version to make the patch. I haven't thought about what would be needed to make it work though.

GeoffR · 12-18-2014, 07:06 PM

Quote:

Originally Posted by makara

I can not make a patch for Aura HD using Mac. I think a little experience. Can anybody help me?

On the Mac it is important to run the script from the command line, so you need to open a terminal, change to the patch_kobo_3120 directory, and run ./3.12.0.sh

If you post the output from running the script, we can see where the error is occuring.

(On my Linux system (Debian with Gnome desktop), double-clicking on 3.12.0.sh works, but it might not work on all Linux systems.)

scoky · 12-18-2014, 08:05 PM

Quote:

Originally Posted by GeoffR

Is increasing the padding from 0.1em to 0.2em enough to fix it? Sone fonts will need more padding than others.

That's an interesting idea, it would have the advantage of avoiding any possibility of using the wrong firmware version to make the patch. I haven't thought about what would be needed to make it work though.

I'm afraid not. Because "body>p" and "body>div"only have effect on the first class p and div under body. However, in some books, the main text is in the second or more deeper class and it will not be modified with the patch.

Code:

<body>
            <div>
              <p>text</p>
            </div>
          </body>

GeoffR · 12-18-2014, 08:20 PM

Quote:

Originally Posted by scoky

I'm afraid not. Because "body>p" and "body>div"only have effect on the first class p and div under body. However, in some books, the main text is in the second or more deeper class and it will not be modified with the patch.

That is the purpose of the body>div selector: the padding gets added to the outer <div>, so it doesn't need to be added again to the inner elements.

With synced kepubs the padding only ever gets added to an outer <div>, never to <p> or any other inner elements. With the sideloaded kepubs there is not always an outer <div>, so the body>p selector ensures it gets added to the <p> in that case.

With the earlier versions of the patch, the padding got applied both to the outer <div> and to the inner <p>, so there would be twice as much padding (or more, depending on how many outer <div> layers), which is why I think increasing the amount of padding in the latest version of the patch might be needed to get as much padding as was in the earlier versions.

scoky · 12-18-2014, 09:26 PM

Quote:

Originally Posted by GeoffR

That is the purpose of the body>div selector: the padding gets added to the outer <div>, so it doesn't need to be added again to the inner elements.

With synced kepubs the padding only ever gets added to an outer <div>, never to <p> or any other inner elements. With the sideloaded kepubs there is not always an outer <div>, so the body>p selector ensures it gets added to the <p> in that case.

With the earlier versions of the patch, the padding got applied both to the outer <div> and to the inner <p>, so there would be twice as much padding (or more, depending on how many outer <div> layers), which is why I think increasing the amount of padding in the latest version of the patch might be needed to get as much padding as was in the earlier versions.

You are right. I increase paddings to 0.2em and it works very well. Thanks!

makara · 12-19-2014, 02:04 AM

Here is a message in the terminal:
Vladimirs-iMac:~ vlad$ /Users/vlad/Desktop/patch_kobo_3120
-bash: /Users/vlad/Desktop/patch_kobo_3120: is a directory
Vladimirs-iMac:~ vlad$ /Users/vlad/Desktop/patch_kobo_3120/3.12.0.sh
Extracting files to patch from 3.12.0_source/kobo-update-3.12.0.zip ...
tar: ./usr/local/Kobo/librmsdk.so.1.0.0: Not found in archive
tar: ./usr/local/Kobo/libadobe.so: Not found in archive
tar: ./usr/local/Kobo/libnickel.so.1.0.0: Not found in archive
tar: Error exit delayed from previous errors.
Cleaning up /var/folders/my/lb6mkqpj5sz6xqccmwrt7m380000gn/T/patch32lsb_XXXXXXXX.iHMoK4JY
Vladimirs-iMac:~ vlad$

Jellby · 12-19-2014, 03:15 AM

Quote:

Originally Posted by GeoffR

With the sideloaded kepubs there is not always an outer <div>, so the body>p selector ensures it gets added to the <p> in that case.

I wonder if "body>*" would work. "body>div, body>p" misses h1...h6 and blockquote at least.

I don't use kepub, sideloaded or not, so my interest is purely academical

GeoffR · 12-19-2014, 03:34 AM

Quote:

Originally Posted by makara

Here is a message in the terminal:
Vladimirs-iMac:~ vlad$ /Users/vlad/Desktop/patch_kobo_3120
-bash: /Users/vlad/Desktop/patch_kobo_3120: is a directory
Vladimirs-iMac:~ vlad$ /Users/vlad/Desktop/patch_kobo_3120/3.12.0.sh
Extracting files to patch from 3.12.0_source/kobo-update-3.12.0.zip ...
tar: ./usr/local/Kobo/librmsdk.so.1.0.0: Not found in archive
tar: ./usr/local/Kobo/libadobe.so: Not found in archive
tar: ./usr/local/Kobo/libnickel.so.1.0.0: Not found in archive
tar: Error exit delayed from previous errors.
Cleaning up /var/folders/my/lb6mkqpj5sz6xqccmwrt7m380000gn/T/patch32lsb_XXXXXXXX.iHMoK4JY
Vladimirs-iMac:~ vlad$

Can you try changing to the patch_kobo_3120 directory and run the script from there, i.e.

cd /Users/vlad/Desktop/patch_kobo_3120
./3.12.0.sh

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Instructions for patching firmware 3.11.0	GeoffR	Kobo Developer's Corner	226	06-01-2015 05:32 AM
Instructions for patching firmware 3.2.0	DNSB	Kobo Developer's Corner	66	12-05-2014 07:28 AM
Instructions for patching firmware 3.8.0	GeoffR	Kobo Developer's Corner	92	10-22-2014 07:22 AM
Instructions for patching firmware 3.3.x, 3.4.x, 3.5.x	GeoffR	Kobo Developer's Corner	285	08-27-2014 10:06 AM
Instructions for patching firmware 3.1.1	GeoffR	Kobo Developer's Corner	64	04-18-2014 01:23 PM

12-17-2014, 01:53 PM	#77
npr Zealot Posts: 119 Karma: 37418 Join Date: Jan 2013 Device: H2OE2, Libra 2	Yes I have tried this patch and yes you're right it doesn't work, but thank for trying. My present solution is to modify the line spacing in your patch to remove the smaller spacings which cause the worst of this issue. At least it makes it easier for me to find a suitable font size / line size setting. eg: # 15 values for replacement replace_float = 6C3BC0, 1.0, 0.82 replace_float = 6C3C88, 1.05, 0.83 replace_float = 6C3C90, 1.07, 0.84 replace_float = 6C3C98, 1.1, 0.85 replace_float = 6C3BC8, 1.2, 0.86 replace_float = 6C3CA0, 1.35, 0.87 replace_float = 6C3BD0, 1.5, 0.88 replace_float = 6C3CA8, 1.7, 0.89 replace_float = 6C3CB0, 1.8, 0.9 replace_float = 6C3BD8, 2.0, 0.92 replace_float = 6C3CB8, 2.2, 0.94 replace_float = 6C3CC0, 2.4, 0.97 replace_float = 6C3CC8, 2.6, 1.0 replace_float = 6C3CD0, 2.8, 1.05 replace_float = 6C3BE0, 3.0, 1.1

12-18-2014, 06:37 AM	#80
makara Connoisseur Posts: 79 Karma: 10000 Join Date: Jul 2012 Location: Israel Device: KA1, KLH2O, Oasis 3	I can not make a patch for Aura HD using Mac. I think a little experience. Can anybody help me?

12-18-2014, 09:35 AM	#81
frostschutz Linux User Posts: 2,282 Karma: 6123806 Join Date: Sep 2010 Location: Heidelberg, Germany Device: none	Have you ever tried/considered porting this to the Kobo so the device would patch itself after placing patch files in the USB storage?

12-18-2014, 05:37 PM	#82
erikssenmar867 Connoisseur Posts: 58 Karma: 12028 Join Date: Nov 2013 Device: Kobo Aura H2O	geoffr thank you very much for your patch and your disponibility

12-19-2014, 02:04 AM	#88
makara Connoisseur Posts: 79 Karma: 10000 Join Date: Jul 2012 Location: Israel Device: KA1, KLH2O, Oasis 3	Here is a message in the terminal: Vladimirs-iMac:~ vlad$ /Users/vlad/Desktop/patch_kobo_3120 -bash: /Users/vlad/Desktop/patch_kobo_3120: is a directory Vladimirs-iMac:~ vlad$ /Users/vlad/Desktop/patch_kobo_3120/3.12.0.sh Extracting files to patch from 3.12.0_source/kobo-update-3.12.0.zip ... tar: ./usr/local/Kobo/librmsdk.so.1.0.0: Not found in archive tar: ./usr/local/Kobo/libadobe.so: Not found in archive tar: ./usr/local/Kobo/libnickel.so.1.0.0: Not found in archive tar: Error exit delayed from previous errors. Cleaning up /var/folders/my/lb6mkqpj5sz6xqccmwrt7m380000gn/T/patch32lsb_XXXXXXXX.iHMoK4JY Vladimirs-iMac:~ vlad$

Advert

Advert