Content Server - Page 2

eschwartz · 05-04-2015, 02:56 PM

Yes, tell your husband to look into running `calibre-server` multiple times on different ports.

Note -- that also works for serving the same library twice with, say, restrictions applied. In case you need to set it up for other people.

Tanjamuse · 05-04-2015, 02:59 PM

Is there a guide for beginners to set up that? He doesn't know Calibre and I don't know much about servers

eschwartz · 05-04-2015, 03:09 PM

This is for putting calibre-server behind another webserver: http://manual.calibre-ebook.com/server.html

Or just have him read the CLI manual page, it is fairly intuitive (assuming one is in the habit of comprehending technical jargon

). All he needs to do is run the calibre-server command and fill in the blanks on a couple of command flags.

Tanjamuse · 05-04-2015, 03:10 PM

We'll have a look when we figure out what to buy

chaley · 05-04-2015, 03:16 PM

Quote:

Originally Posted by Tanjamuse

Can I have several libraries on the same server?

Yes, either virtual libraries or separate libraries. Each would have a different "port", and possibly a different password.

Tanjamuse · 05-04-2015, 03:17 PM

Can I have more than one port on a single nas-harddrive?

chaley · 05-04-2015, 03:21 PM

Quote:

Originally Posted by Tanjamuse

Can I have more than one port on a single nas-harddrive?

The "port" is a number associated with a content server instance, which is a (virtual) library. You can have as many content server instances on a given computer as you wish (as said by eschwartz). Each instance can serve a physical library, perhaps restricted by a virtual library.

As for using a NAS: usually the content server can access libraries on a NAS because it is read-only, but that isn't guaranteed.

Tanjamuse · 05-04-2015, 03:25 PM

What else would you suggest (that isn't that expensive)? Because I don't fancy spending money every month for some space in the cloud.

chaley · 05-04-2015, 03:36 PM

Quote:

Originally Posted by Tanjamuse

What else would you suggest (that isn't that expensive)? Because I don't fancy spending money every month for some space in the cloud.

It seems that you already have looked at the solutions:

An always-up content server on your local network, where you pay for the machine and electricity to run it, where it will go down if power fails at your home, and where you are responsible for maintaining the hardware.
An always-up content server in the "cloud" somewhere where you pay someone else to keep it running and to maintain it.
Keep your entire library on your reader device, updating it from calibre on demand. I will mention that CC works for this, given your questions on the CC forum.
Keep your library on a windows/linux laptop/tablet. synchronized somehow with the "master" copy.
Keep your library on a cloud service like dropbox, accessing it in whatever way it supports (Calibre Cloud, calibre OPDS, etc)

Up to you.

Tanjamuse · 05-04-2015, 03:38 PM

If the Nas is read only, how do I get my libraries on?

chaley · 05-04-2015, 03:46 PM

Quote:

Originally Posted by Tanjamuse

If the Nas is read only, how do I get my libraries on?

The NAS is not read-only. The calibre server instance is read-only. Read/write calibre libraries on a NAS are not supported (http://manual.calibre-ebook.com/faq....rked-drive-nas).

And sorry, but this sort of question can go on forever. I can't be your personal computer support technician. There are a zillion web pages explaining how to set up various kinds of servers, how to configure home routers, how to set up DNS naming, and how to arrange for synchronization. It is really now up to you to work out what you want to do and how to do it.

theducks · 05-04-2015, 04:17 PM

Quote:

Originally Posted by Tanjamuse

Can I have several libraries on the same server?

Not unless they are just VL's

eschwartz · 05-04-2015, 04:25 PM

Quote:

Originally Posted by theducks

Not unless they are just VL's

As chaley and I said above, you can have as many servers as you like, VL or otherwise.

Via the GUI server instance, you can only have one, even factoring in the (meaninglessness of) VLs.

theducks · 05-04-2015, 05:06 PM

Quote:

Originally Posted by eschwartz

As chaley and I said above, you can have as many servers as you like, VL or otherwise.

Via the GUI server instance, you can only have one, even factoring in the (meaninglessness of) VLs.

I was taking the question a Literal.

1 Calibre content server, singular,
not how many servers can you run on a single system (or on your network)

1 server (and port) per PHYSICAL Library (metadata.db)

eschwartz · 05-04-2015, 07:10 PM

Ah, I see. I was taking it according to what I thought it meant, i.e. "server" = "this special computer that runs a website" which fit better and didn't involve calibre naming trivia.

05-04-2015, 02:56 PM	#16
eschwartz Ex-Helpdesk Junkie Posts: 19,421 Karma: 85400180 Join Date: Nov 2012 Location: The Beaten Path, USA, Roundworld, This Side of Infinity Device: Kindle Touch fw5.3.7 (Wifi only)	Yes, tell your husband to look into running `calibre-server` multiple times on different ports. Note -- that also works for serving the same library twice with, say, restrictions applied. In case you need to set it up for other people. Last edited by eschwartz; 05-04-2015 at 02:59 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Content server on ubuntu 12.04 headless server ImageMagick: libltdl.so.7	Cool Javelin	Calibre	5	04-08-2015 02:20 AM
Calibre Content Server and Windows Home Server 2011	HughMcC	Calibre	8	10-01-2014 07:26 AM
500 Internal Server Error accessing content server Calibre 0.8.8	DaddyO57	Calibre	1	07-20-2012 06:08 PM
help please content server	allaboutroot.com	Devices	3	12-03-2011 02:08 AM
Content server not serving all content.	False_Chicken	Calibre	0	10-19-2011 05:56 PM

05-04-2015, 02:59 PM	#17
Tanjamuse Wizard Posts: 1,327 Karma: 5306 Join Date: Jan 2014 Device: none	Is there a guide for beginners to set up that? He doesn't know Calibre and I don't know much about servers

05-04-2015, 03:09 PM	#18
eschwartz Ex-Helpdesk Junkie Posts: 19,421 Karma: 85400180 Join Date: Nov 2012 Location: The Beaten Path, USA, Roundworld, This Side of Infinity Device: Kindle Touch fw5.3.7 (Wifi only)	This is for putting calibre-server behind another webserver: http://manual.calibre-ebook.com/server.html Or just have him read the CLI manual page, it is fairly intuitive (assuming one is in the habit of comprehending technical jargon ). All he needs to do is run the calibre-server command and fill in the blanks on a couple of command flags.

05-04-2015, 03:10 PM	#19
Tanjamuse Wizard Posts: 1,327 Karma: 5306 Join Date: Jan 2014 Device: none	We'll have a look when we figure out what to buy

05-04-2015, 03:17 PM	#21
Tanjamuse Wizard Posts: 1,327 Karma: 5306 Join Date: Jan 2014 Device: none	Can I have more than one port on a single nas-harddrive?

05-04-2015, 03:25 PM	#23
Tanjamuse Wizard Posts: 1,327 Karma: 5306 Join Date: Jan 2014 Device: none	What else would you suggest (that isn't that expensive)? Because I don't fancy spending money every month for some space in the cloud.

05-04-2015, 03:38 PM	#25
Tanjamuse Wizard Posts: 1,327 Karma: 5306 Join Date: Jan 2014 Device: none	If the Nas is read only, how do I get my libraries on?

05-04-2015, 07:10 PM	#30
eschwartz Ex-Helpdesk Junkie Posts: 19,421 Karma: 85400180 Join Date: Nov 2012 Location: The Beaten Path, USA, Roundworld, This Side of Infinity Device: Kindle Touch fw5.3.7 (Wifi only)	Ah, I see. I was taking it according to what I thought it meant, i.e. "server" = "this special computer that runs a website" which fit better and didn't involve calibre naming trivia.

Advert

Advert