Register Guidelines E-Books Today's Posts Search

Go Back   MobileRead Forums > E-Book Readers > Kobo Reader > Kobo Developer's Corner

Notices

Reply
 
Thread Tools Search this Thread
Old 10-13-2026, 02:19 PM   #1
bosa
Junior Member
bosa began at the beginning.
 
Posts: 2
Karma: 10
Join Date: Oct 2026
Device: Tolino Shine 5/Kobo Clara BW
Post NickelTiles: an app tile grid for the Kobo home screen (testers wanted)

NickelTiles is a NickelHook mod that turns the Kobo home screen into a grid of app tiles.



What it does
  • Every NickelMenu main-menu entry becomes a tile automatically (KOReader, Plato, USB connection, reboot, KPM, ...). The grid updates whenever you add or remove an entry.
  • Continue reading: one tile always shows your most recent book, regardless of which reading app you read it in (KOReader, Plato or Kobo's own reader), with the cover (or a book icon, if you prefer) and any of title, author and progress. Tapping it opens the book in the app that last read it. Covers come from EPUB, KEPUB, FB2, MOBI, AZW3 and CBZ books; others (PDF, for example) show the book icon.
  • Sleep screen: Requires Kobo native settings "Show book covers full screen" option set to on The sleep screen shows your most recent book's cover no matter which app you read it it, even if you sleep the device after closing the app.
  • Settings on the device: a Tiles settings tile opens a page for tiles per row, tile size, which tiles are shown and the options above. Changes apply at once, no reboot. Tiles size themselves to fill your screen's width by default.
  • Repair switched-off add-ons: if a crash right after Kobo starts leaves NickelMenu, KPM, NickelHome or other NickelHook add-ons switched off, the settings page lists them and turns them back on with one tap.
  • Long-press a tile, then tap another one to swap them. Tiles darken while pressed.

Status: early, testers wanted
So far it has only run on one device: a Tolino Shine 5 (T302), which is Clara BW hardware, running Kobo's Clara BW firmware 4.45.23697. Firmware from 4.23.15505 on uses the same home screen layout and may work, but nobody has tried it yet. If your device or firmware is different, a report helps a lot, even if it is just "it works".

NickelHook's failsafe applies: if Nickel crashes within 3 seconds of the mod loading, the mod disables itself and Nickel starts normally; reinstalling turns it back on. Tip: wait about 30 seconds after a boot before launching KOReader or Plato or rebooting. NickelHook mods (this one, NickelMenu, KPM's add-on) can treat an early restart as a crash and switch themselves off.

Install
With KPM:
Code:
kpm add https://github.com/marin-o/NickelTiles --name nickeltiles
kpm check
kpm update nickeltiles
then restart the reader. (KPM's "Update all" reboots on its own but can leave a stale lock that makes KPM keep saying "staged"; restarting yourself avoids that.)
By hand: download KoboRoot.tgz from the latest release, copy it into the .kobo folder, eject and unplug. The reader installs it and restarts.

The grid replaces Kobo's home rows. To keep Kobo's own home widgets under the tiles, turn off "Hide Kobo's home rows" in Tiles settings.

NickelMenu is optional. Without it you get the built-in tiles and any tile: lines from the config file.

Uninstall
"kpm uninstall nickeltiles", or create an empty file named uninstall in .adds/nickel-tiles and reboot. Your settings file is kept.

What to report
  • Device model and firmware version (Settings > Device information)
  • Does the grid appear on the home screen, fill the width of your screen, and do the tiles launch?
  • Continue reading: right book, right cover (which format?), opens in the right app?
  • Sleep screen cover (with "Show book covers full screen" on)
  • Tiles settings page: do Save and Cancel work, and does the page fit your screen?
If something is wrong: set nt_log:1 in .adds/nickel-tiles/config, reboot, reproduce the problem, then attach .adds/nickel-tiles/nickel-tiles.log. With nt_log:1 the mod also saves screenshots of the home screen and the settings page in that folder.
Reports here or on GitHub are both fine.

Notes
  • A NickelMenu entry that rescans the library won't run from a tile; NickelTiles refuses it on purpose, because on the development device a rescan deleted sideloaded books. The same entry still works from NickelMenu's own menu.
  • Plato has no way to open a specific book at launch, so Plato books open Plato itself.

Source and releases: https://github.com/marin-o/NickelTiles (MIT). Releases are built by GitHub Actions in the NickelTC image.

Special :
Built on NickelHook by pgaskin; the NickelMenu action handling follows NickelMenu.
bosa is offline   Reply With Quote
Old 11-05-2026, 05:33 PM   #2
bosa
Junior Member
bosa began at the beginning.
 
Posts: 2
Karma: 10
Join Date: Oct 2026
Device: Tolino Shine 5/Kobo Clara BW
Post NickelTiles 0.9.0 is out.

Woohoo, first big update! The thread opened with version 0.7.0, and this is version 0.9.0, a whole 2 feature releases!

New
  • Book tiles: up to 10 recently read books get a tile each, newest first, from KOReader, Plato and Kobo's reader (Tiles settings > Books > Book tiles).
  • Pages: tiles that don't fit go on further pages. Swipe sideways or use the arrows under the tiles.
  • Kobo's home rows is now Hidden, Top row or All rows. Kept rows share the first page with as many tiles as fit; the rest go on the next pages.
  • Settings page now has tabs: Layout, Books, Tiles and Help, along the bottom.
  • Sleep screen: if Kobo's own reader has no book to show (say you only ever read in KOReader or Plato), you used to get plain "Sleeping". Now you get the Continue reading cover, as long as Kobo has the book in its library.
  • Safety: if Kobo crashes three times in a row right after starting, NickelTiles turns itself off in case it was its fault and asks you if you want to turn it back on. NickelTiles also offers a NickelTiles off/on entry for NickelMenu. On first install it asks if you want the NickelMenu entry, or you can enable it in Settings. Crashes are always logged to .adds/nickel-tiles/nickel-tiles.log; please attach it to reports.

Fixed
  • Tiles overlapping or losing their captions when Kobo's rows were kept.
  • A first install with only the settings tile looked broken; Kobo's rows now stay, with the tile in the empty half of the top row.
  • Tiles are centred when they don't fill the width.
  • Uninstalling also removes the sleep-screen cover NickelTiles put there.

Update with KPM (kpm check, kpm update nickeltiles, then restart the reader yourself) or copy KoboRoot.tgz from the release into .kobo. Planning to see if I can get NickelTiles in KPM's repository so hopefully soon you won't have to manually add it using the main post's instructions

Tested on firmware 4.45.23697 on a reader and on 4.45 and 4.46.23836 in an emulator. Reports from other readers and firmware are very welcome, even "it works".

Credit where it's due: the way NickelTiles finds and hides Kobo's home rows follows @MrSilverstrike's NickelHome, and it's all built on pgaskin's NickelHook. Both are now credited in the README. Testing on firmware I don't have on my reader is possible thanks to katadelos' eink-emulator, which runs real Kobo firmware on a PC.

Release notes: https://github.com/marin-o/NickelTil...ses/tag/v0.9.0
bosa is offline   Reply With Quote
Reply

Tags
homescreen, koreader, nickelhook, nickelmenu, nickeltiles


Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
NickelAI beta - contextual AI from Kobo's native selection menu (testers wanted) paolomulas Kobo Developer's Corner 5 08-17-2026 11:49 AM
HDX App Collections not showing on Home screen Josieb1 Amazon Fire 1 02-22-2015 07:04 PM
Kindle Beta testers wanted kindle-checkers General Discussions 3 04-17-2011 12:16 PM
Beta testers wanted! Forkosigan PocketBook 28 12-22-2010 02:42 PM
Beta testers wanted mtravellerh PocketBook 47 09-15-2010 05:22 PM


All times are GMT -4. The time now is 10:07 AM.


MobileRead.com is a privately owned, operated and funded community.