impossible to re install koreader "generator error"

Strrav · 01-30-2023, 08:11 AM

hello
after an automatic update of my kobo H2O V2 , I can't reinstall Koreader
clic on Nickelmenu give a pop up : " generator error" ...
clic in generator error : kfmon: error checking':/tmp/kfmon-ipc.ctl': stat: No such file or directory (snc/generator_c.c:93)
I like very much Koreader which is really better than the kobo interface !

I Just followed this thread, but no solution.

"Connect your Kobo eReader to your computer over USB.
Download KoboRoot.tgz (release notes) into KOBOeReader/.kobo. You may need to show hidden files to see the folder.
Safely eject your eReader and wait for it to reboot.
Ensure there is a new menu item in the top-left main menu entitled NickelMenu (it will appear in the bottom-right on firmware 4.23.15505+).
Connect you Kobo eReader to your computer again and create a new file (of any type) named KOBOeReader/.adds/nm/config, and follow the instructions in KOBOeReader/.adds/nm/doc to configure NickelMenu."

Is there a detailed thread to solve the problem ? thanks

NiLuJe · 01-30-2023, 11:57 AM

That's perfectly normal after a FW update, you'll just have to reinstall KFMon.

The OCP thread has a simple KFMon package just for that purpose.

Strrav · 01-31-2023, 04:41 AM

bonjour

good morning
I followed your instructions with the one click for Mac, everything seems to have happened normally with the Mac terminal. But after rebooting several times, my Kobo H2O V2. displays nickel menu with 2 options koreader and Plato, if I choose one of the options my reader is completely blocked and I have to reboot...I also Try to install only koreader, but same result...
What should I do? Thanks

NiLuJe · 01-31-2023, 12:49 PM

If your device is a revision 1 (i.e., the original run of H2O²), FW 4.35 introduced a regression that misidentifies it as a revision 2. That will break custom applications in fun and interesting ways.

(c.f., https://www.mobileread.com/forums/sh...&postcount=247 and the ensuing investigation).

Strrav · 01-31-2023, 04:29 PM

Thanks for your answer.
But, No, it is a KOBO aura H2O edition 2 and it dont work...
I tried with the different install for Mac (OCP-Plato-0.9.34_KOReader-v2022-1.11, OCP-KOReader-v2022.11 ...)
perhaps I have to erase some folders on my kobo ?? to clean the install ?

NiLuJe · 02-01-2023, 02:45 PM

Revision doesn't mean Edition in that context (blame Rakuten's terrible naming scheme).

There was a hardware revision of the Aura H2O Edition 2; it is identified as a completely different device because of key incompatibilities between how the two revisions function.

FW 4.35 broke that and fails to identify a rev1 as such, instead presenting it as a rev2. This breaks custom applications.

i.e., I *am* talking about H2O²r1 vs. H2O²r2, NOT H2O vs. H2O².

Strrav · 02-03-2023, 10:07 AM

Donc on ne peut plus installer koreader après la dernière revision ? FW 4.35 ?

NiLuJe · 02-03-2023, 02:13 PM

Not without some extra steps (taking a page from https://www.mobileread.com/forums/sh...&postcount=252), namely, a custom NickelMenu config entry:

Code:

# Launch KOReader directly via NM after fixing the FW 4.35 H2O²r1 mess
menu_item : main : KOReader NM : cmd_spawn : sed -i '$s/.$/4/' /mnt/onboard/.kobo/version
                  chain_always : cmd_spawn : quiet : exec /mnt/onboard/.adds/koreader/koreader.sh

Strrav · 02-04-2023, 12:46 PM

merci
que dois je faire du code ? comment ça marche?
Code:
# Launch KOReader directly via NM after fixing the FW 4.35 H2O²r1 mess
menu_item : main : KOReader NM : cmd_spawn : sed -i '$s/.$/4/' /mnt/onboard/.kobo/version
chain_always : cmd_spawn : quiet : exec /mnt/onboard/.adds/koreader/koreader.sh

NiLuJe · 02-05-2023, 02:23 PM

The OCP ships with a commented out code fragment installed to `.adds/nm/koreader`, so you can just copy that block of code at the tail end of it.

Strrav · 03-03-2023, 04:53 AM

It Works, you're a master !
so nice to have koreader Back
THANK YOU !!

janadelbosco · 07-26-2023, 07:38 PM

Quote:

Originally Posted by Strrav

hello
after an automatic update of my kobo H2O V2 , I can't reinstall Koreader
clic on Nickelmenu give a pop up : " generator error" ...
clic in generator error : kfmon: error checking':/tmp/kfmon-ipc.ctl': stat: No such file or directory (snc/generator_c.c:93)
I like very much Koreader which is really better than the kobo interface !

I Just followed this thread, but no solution.

"Connect your Kobo eReader to your computer over USB.
Download KoboRoot.tgz (release notes) into KOBOeReader/.kobo. You may need to show hidden files to see the folder.
Safely eject your eReader and wait for it to reboot.
Ensure there is a new menu item in the top-left main menu entitled NickelMenu (it will appear in the bottom-right on firmware 4.23.15505+).
Connect you Kobo eReader to your computer again and create a new file (of any type) named KOBOeReader/.adds/nm/config, and follow the instructions in KOBOeReader/.adds/nm/doc to configure NickelMenu."

Is there a detailed thread to solve the problem ? thanks

Hello, I'm getting the same error on my Kobo Clara HD. I used to use Koreader having no issues at all, but two days ago I had to format it and now It doesn't work anymore. I followed the OCP steps as the first time, but now I'm getting this "Generator error". I tried installing the KFMon pack, still getting the same result (nothing changes installing KFMon). What's happening? What can I do? Thank you so much.

janadelbosco · 07-27-2023, 07:50 AM

I'm trying again today. I have:
-formatted my Clara HD
-unplugged
-followed Kobo configuration first steps
-unabled automatic actualisations
-plugged again
-installed KOReader using the automated script from this post: https://www.mobileread.com/forums/sh...96&postcount=2
-unplugged
It still doesn't work. I have "NickelMenu" on bottom right of the screen, but when touching it I get the "Generator error". I plugged it again to my pc and checked that KFMon files are still there. Am I doing something wrong? Thanks!

janadelbosco · 07-27-2023, 08:43 AM

Now I've tried inserting this piece of code as NiLuJe suggested to another user:
# Launch KOReader directly via NM after fixing the FW 4.35 H2O²r1 mess
menu_item : main : KOReader NM : cmd_spawn : sed -i '$s/.$/4/' /mnt/onboard/.kobo/version
chain_always : cmd_spawn : quiet : exec /mnt/onboard/.adds/koreader/koreader.sh
And now I can run Koreader but it appears completely upside down... I mean, the screen is upside down and if I want to touch a feature that is in the top right corner I have to touch the bottom left... So the image and the touch-screen are mirrored and it's basically unusable. Help!

NiLuJe · 07-27-2023, 10:44 PM

@janadelbosco: Assuming you're running FW 4.37, you don't actually need the workaround anymore.

Restart the device and simply use a standard launch method; whether that be KFMon or NM or KFMon via NM.

FWIW, you probably just got a FW update along the way, and just needed to reinstall KFMon. Or you can switch to a plain NM setup, as mentioned above, the OCP ships with those examples commented out.

01-30-2023, 08:11 AM	#1
Strrav Connoisseur Posts: 56 Karma: 10 Join Date: Feb 2018 Location: France Device: Kobo H2O edition 2	impossible to re install koreader "generator error" hello after an automatic update of my kobo H2O V2 , I can't reinstall Koreader clic on Nickelmenu give a pop up : " generator error" ... clic in generator error : kfmon: error checking':/tmp/kfmon-ipc.ctl': stat: No such file or directory (snc/generator_c.c:93) I like very much Koreader which is really better than the kobo interface ! I Just followed this thread, but no solution. "Connect your Kobo eReader to your computer over USB. Download KoboRoot.tgz (release notes) into KOBOeReader/.kobo. You may need to show hidden files to see the folder. Safely eject your eReader and wait for it to reboot. Ensure there is a new menu item in the top-left main menu entitled NickelMenu (it will appear in the bottom-right on firmware 4.23.15505+). Connect you Kobo eReader to your computer again and create a new file (of any type) named KOBOeReader/.adds/nm/config, and follow the instructions in KOBOeReader/.adds/nm/doc to configure NickelMenu." Is there a detailed thread to solve the problem ? thanks Last edited by Strrav; 01-30-2023 at 08:20 AM.

01-31-2023, 04:41 AM	#3
Strrav Connoisseur Posts: 56 Karma: 10 Join Date: Feb 2018 Location: France Device: Kobo H2O edition 2	bonjour good morning I followed your instructions with the one click for Mac, everything seems to have happened normally with the Mac terminal. But after rebooting several times, my Kobo H2O V2. displays nickel menu with 2 options koreader and Plato, if I choose one of the options my reader is completely blocked and I have to reboot...I also Try to install only koreader, but same result... What should I do? Thanks Last edited by Strrav; 01-31-2023 at 09:53 AM.

02-03-2023, 02:13 PM	#8
NiLuJe BLAM! Posts: 13,506 Karma: 26047190 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Not without some extra steps (taking a page from https://www.mobileread.com/forums/sh...&postcount=252), namely, a custom NickelMenu config entry: Code: # Launch KOReader directly via NM after fixing the FW 4.35 H2O²r1 mess menu_item : main : KOReader NM : cmd_spawn : sed -i '$s/.$/4/' /mnt/onboard/.kobo/version chain_always : cmd_spawn : quiet : exec /mnt/onboard/.adds/koreader/koreader.sh

03-03-2023, 04:53 AM	#11
Strrav Connoisseur Posts: 56 Karma: 10 Join Date: Feb 2018 Location: France Device: Kobo H2O edition 2	It Works, you're a master ! so nice to have koreader Back THANK YOU !! Last edited by Strrav; 03-03-2023 at 06:14 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GUI Plugin "TOC View Generator" (was: Define Content)	Mick2nd	Plugins	20	06-26-2024 03:19 AM
Fresh install "No suitable graphics backend found" error message	willbontrager	Calibre	6	08-31-2022 11:49 AM
Getting "insufficient privileges" error when trying to install 5.32	jenrar	Calibre	6	12-04-2021 01:19 AM
"Error communicating with device" on Kobo Clara w Koreader	jd2733	Devices	2	01-17-2021 10:45 AM
Error during Calibre Portable install: "cannot create file that already exists"	branpurn	Devices	2	04-11-2018 07:22 PM

01-30-2023, 11:57 AM	#2
NiLuJe BLAM! Posts: 13,506 Karma: 26047190 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	That's perfectly normal after a FW update, you'll just have to reinstall KFMon. The OCP thread has a simple KFMon package just for that purpose.

01-31-2023, 12:49 PM	#4
NiLuJe BLAM! Posts: 13,506 Karma: 26047190 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	If your device is a revision 1 (i.e., the original run of H2O²), FW 4.35 introduced a regression that misidentifies it as a revision 2. That will break custom applications in fun and interesting ways. (c.f., https://www.mobileread.com/forums/sh...&postcount=247 and the ensuing investigation).

01-31-2023, 04:29 PM	#5
Strrav Connoisseur Posts: 56 Karma: 10 Join Date: Feb 2018 Location: France Device: Kobo H2O edition 2	Thanks for your answer. But, No, it is a KOBO aura H2O edition 2 and it dont work... I tried with the different install for Mac (OCP-Plato-0.9.34_KOReader-v2022-1.11, OCP-KOReader-v2022.11 ...) perhaps I have to erase some folders on my kobo ?? to clean the install ?

02-01-2023, 02:45 PM	#6
NiLuJe BLAM! Posts: 13,506 Karma: 26047190 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Revision doesn't mean Edition in that context (blame Rakuten's terrible naming scheme). There was a hardware revision of the Aura H2O Edition 2; it is identified as a completely different device because of key incompatibilities between how the two revisions function. FW 4.35 broke that and fails to identify a rev1 as such, instead presenting it as a rev2. This breaks custom applications. i.e., I am talking about H2O²r1 vs. H2O²r2, NOT H2O vs. H2O².

02-03-2023, 10:07 AM	#7
Strrav Connoisseur Posts: 56 Karma: 10 Join Date: Feb 2018 Location: France Device: Kobo H2O edition 2	Donc on ne peut plus installer koreader après la dernière revision ? FW 4.35 ?

02-04-2023, 12:46 PM	#9
Strrav Connoisseur Posts: 56 Karma: 10 Join Date: Feb 2018 Location: France Device: Kobo H2O edition 2	merci que dois je faire du code ? comment ça marche? Code: # Launch KOReader directly via NM after fixing the FW 4.35 H2O²r1 mess menu_item : main : KOReader NM : cmd_spawn : sed -i '$s/.$/4/' /mnt/onboard/.kobo/version chain_always : cmd_spawn : quiet : exec /mnt/onboard/.adds/koreader/koreader.sh

02-05-2023, 02:23 PM	#10
NiLuJe BLAM! Posts: 13,506 Karma: 26047190 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	The OCP ships with a commented out code fragment installed to `.adds/nm/koreader`, so you can just copy that block of code at the tail end of it.

07-27-2023, 07:50 AM	#13
janadelbosco Junior Member Posts: 6 Karma: 10 Join Date: Jul 2023 Device: Kobo Clara HD	I'm trying again today. I have: -formatted my Clara HD -unplugged -followed Kobo configuration first steps -unabled automatic actualisations -plugged again -installed KOReader using the automated script from this post: https://www.mobileread.com/forums/sh...96&postcount=2 -unplugged It still doesn't work. I have "NickelMenu" on bottom right of the screen, but when touching it I get the "Generator error". I plugged it again to my pc and checked that KFMon files are still there. Am I doing something wrong? Thanks!

07-27-2023, 08:43 AM	#14
janadelbosco Junior Member Posts: 6 Karma: 10 Join Date: Jul 2023 Device: Kobo Clara HD	Now I've tried inserting this piece of code as NiLuJe suggested to another user: # Launch KOReader directly via NM after fixing the FW 4.35 H2O²r1 mess menu_item : main : KOReader NM : cmd_spawn : sed -i '$s/.$/4/' /mnt/onboard/.kobo/version chain_always : cmd_spawn : quiet : exec /mnt/onboard/.adds/koreader/koreader.sh And now I can run Koreader but it appears completely upside down... I mean, the screen is upside down and if I want to touch a feature that is in the top right corner I have to touch the bottom left... So the image and the touch-screen are mirrored and it's basically unusable. Help!

07-27-2023, 10:44 PM	#15
NiLuJe BLAM! Posts: 13,506 Karma: 26047190 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	@janadelbosco: Assuming you're running FW 4.37, you don't actually need the workaround anymore. Restart the device and simply use a standard launch method; whether that be KFMon or NM or KFMon via NM. FWIW, you probably just got a FW update along the way, and just needed to reinstall KFMon. Or you can switch to a plain NM setup, as mentioned above, the OCP ships with those examples commented out.

Advert

Advert