Color Choices - Page 2

dschill · 03-01-2009, 04:28 PM

i like blue. lol

kwjones · 03-01-2009, 05:53 PM

Went to Target today to get my wife a new digital point and shoot camera that she can keep in the diaper bag for our baby. She's still trying to learn my Nikon D70, but wanted something smaller to take with her to capture those special moments. While we were looking at cameras, I walked around the electronics section and spied a silver PRS-505...the last one. So I got it.

I've already been downloading a bunch of books from this site that I can read to our baby when he gets a little older (Tarzan, Sherlock Holmes, Jules Verne, H.P. Lovecraft, etc.) It's charging now. I'll have to go get a PSP charger next payday.

Faenad · 03-01-2009, 08:07 PM

How are painted the blue and red one? Is it tainted in the mass, or normal paint?

Nobody noticed some problems with the blue or red paint peeling out in the areas most used (buttons, etc.) ?

grooks · 03-01-2009, 08:32 PM

I suspect the color is baked in. Have not heard anyone complain of paint peeling or fading in heavily used areas.

kwjones · 03-01-2009, 10:46 PM

Yeah, I even suspect the silver color is just superficial as well. I've had some silver colored electronics (plastic cases) that I have worn through the silver color around sharp edges with use/abuse. A few edges on my Nintendo DS are white where I've worn the silver off. Since the case is metal on the readers, the colors should be a LOT more durable since they're probably baked on.

lilac_jive · 03-01-2009, 10:57 PM

I can completely confirm that the color goes all the way through. How do I know this? I dropped my Reader on some asphalt and took a good chunk out of the corner. I have a blue one, and the blue goes all the way through.

I tell you what, the thing that suprises me most is the paint on the keys. Mine hasn't worn down at all.

sigma8 · 03-02-2009, 01:58 AM

Quote:

Originally Posted by lilac_jive

I can completely confirm that the color goes all the way through. How do I know this? I dropped my Reader on some asphalt and took a good chunk out of the corner. I have a blue one, and the blue goes all the way through.

I tell you what, the thing that suprises me most is the paint on the keys. Mine hasn't worn down at all.

Can paint "go through"? Maybe the metal just happens to be black? I wasn't aware of metal-permeating paint, but then I'm also not a metallurgist. I would imagine you could add some kind of dye when you smelt, but I'm really out of my league here.

What I really wanted to say is that I'm a little happy to hear your comment on the button-paint. Most of the Sony readers on display in the Sony Style store (the 505's anyway, not the lone 700) all had faded button-paint. Some of the icons were almost completely rubbed off.

Of course, I'm sure those units get felt up quite a bit. They also had wear and tear on the edges, and the paint did not seem to go through. However, it was more of a stressy looking, metallic silver. I forget what the silver unit looked like. I think it might have been a darker silver.

lilac_jive · 03-02-2009, 09:12 AM

Quote:

Originally Posted by sigma8

Can paint "go through"? Maybe the metal just happens to be black? I wasn't aware of metal-permeating paint, but then I'm also not a metallurgist. I would imagine you could add some kind of dye when you smelt, but I'm really out of my league here.

What I really wanted to say is that I'm a little happy to hear your comment on the button-paint. Most of the Sony readers on display in the Sony Style store (the 505's anyway, not the lone 700) all had faded button-paint. Some of the icons were almost completely rubbed off.

Of course, I'm sure those units get felt up quite a bit. They also had wear and tear on the edges, and the paint did not seem to go through. However, it was more of a stressy looking, metallic silver. I forget what the silver unit looked like. I think it might have been a darker silver.

No, it's definitely blue. No clue how they do it, but it works. That's weird about the store units...

igorsk · 03-02-2009, 04:56 PM

It's anodized aluminium.

InspectorGadget · 03-03-2009, 01:56 AM

And the anodizing process plates it inside and out, so you think it goes "through" but it's really just all surfaces.

My silver 505 gets me lots of dates. And at 50, I can use all the dates I can get.

lilac_jive · 03-03-2009, 10:01 AM

Quote:

Originally Posted by InspectorGadget

And the anodizing process plates it inside and out, so you think it goes "through" but it's really just all surfaces.

My silver 505 gets me lots of dates. And at 50, I can use all the dates I can get.

In the blue it is all the way through though. I swear I'm not crazy.

kwjones · 03-03-2009, 10:04 AM

Quote:

Originally Posted by InspectorGadget

My silver 505 gets me lots of dates. And at 50, I can use all the dates I can get.

As a happily married man and new father, should I be worried at the power of the Silver 505 to attract the opposite sex and possibly create problems, through no fault of my own, in my wedded bliss?

Valloric · 03-03-2009, 06:08 PM

Quote:

Originally Posted by InspectorGadget

My silver 505 gets me lots of dates. And at 50, I can use all the dates I can get.

I can already see the new Sony slogan:

"The PRS-505: The ultimate wingman."

grooks · 03-03-2009, 06:13 PM

Quote:

Originally Posted by kwjones

As a happily married man and new father, should I be worried at the power of the Silver 505 to attract the opposite sex and possibly create problems, through no fault of my own, in my wedded bliss?

My girlfriend has gotten jealous a few times. I have had one waitress and two airline stewardesses lean in to ask me about my device.

**By the way I am talking about my Sony Reader**

Angst · 03-09-2009, 05:33 PM

Actually, you should buy the cheapest, and put a skin on it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
So many choices!	Purge	Which one should I buy?	4	03-11-2010 08:49 AM
No other cover choices??	French	Astak EZReader	10	12-07-2009 04:40 PM
Searching down to two choices	DiggerG	Which one should I buy?	2	10-15-2009 02:03 AM
new researching choices	lisagale	Introduce Yourself	3	07-03-2009 11:21 PM
Choices Choices - which reader do i buy	erithian	Which one should I buy?	2	04-17-2009 11:53 AM

03-01-2009, 04:28 PM	#16
dschill Connoisseur Posts: 50 Karma: 12 Join Date: Mar 2009 Device: none	i like blue. lol

03-01-2009, 05:53 PM	#17
kwjones Groupie Posts: 178 Karma: 1546 Join Date: Feb 2009 Location: Rising Sun, MD Device: Sony PRS-505; Motorola Droid	Went to Target today to get my wife a new digital point and shoot camera that she can keep in the diaper bag for our baby. She's still trying to learn my Nikon D70, but wanted something smaller to take with her to capture those special moments. While we were looking at cameras, I walked around the electronics section and spied a silver PRS-505...the last one. So I got it. I've already been downloading a bunch of books from this site that I can read to our baby when he gets a little older (Tarzan, Sherlock Holmes, Jules Verne, H.P. Lovecraft, etc.) It's charging now. I'll have to go get a PSP charger next payday.

03-01-2009, 08:07 PM	#18
Faenad Ad astra per aspera Posts: 347 Karma: 724 Join Date: Aug 2008 Location: Mexico Device: PRS-505, PRS-300 & HTC HD2	How are painted the blue and red one? Is it tainted in the mass, or normal paint? Nobody noticed some problems with the blue or red paint peeling out in the areas most used (buttons, etc.) ?

03-01-2009, 08:32 PM	#19
grooks Wizard Posts: 1,326 Karma: 30250 Join Date: Feb 2008 Location: Fort Myers, FL Device: Pocketbook Era, Kobo Forma	I suspect the color is baked in. Have not heard anyone complain of paint peeling or fading in heavily used areas.

03-01-2009, 10:46 PM	#20
kwjones Groupie Posts: 178 Karma: 1546 Join Date: Feb 2009 Location: Rising Sun, MD Device: Sony PRS-505; Motorola Droid	Yeah, I even suspect the silver color is just superficial as well. I've had some silver colored electronics (plastic cases) that I have worn through the silver color around sharp edges with use/abuse. A few edges on my Nintendo DS are white where I've worn the silver off. Since the case is metal on the readers, the colors should be a LOT more durable since they're probably baked on.

03-01-2009, 10:57 PM	#21
lilac_jive Grand Sorcerer Posts: 5,870 Karma: 27376 Join Date: Dec 2008 Location: Pennsylvania Device: PRS-505	I can completely confirm that the color goes all the way through. How do I know this? I dropped my Reader on some asphalt and took a good chunk out of the corner. I have a blue one, and the blue goes all the way through. I tell you what, the thing that suprises me most is the paint on the keys. Mine hasn't worn down at all.

03-02-2009, 04:56 PM	#24
igorsk Wizard Posts: 3,442 Karma: 300001 Join Date: Sep 2006 Location: Belgium Device: PRS-500/505/700, Kindle, Cybook Gen3, Words Gear	It's anodized aluminium.

03-03-2009, 01:56 AM	#25
InspectorGadget Enthusiast Posts: 47 Karma: 70 Join Date: Apr 2007 Device: Sony PRS-500	And the anodizing process plates it inside and out, so you think it goes "through" but it's really just all surfaces. My silver 505 gets me lots of dates. And at 50, I can use all the dates I can get.

03-09-2009, 05:33 PM	#30
Angst Cannon Fodder Posts: 2,884 Karma: 52253556 Join Date: Jan 2009 Location: Probably a library Device: PRS-350, Kindle DX, Kindle Paperwhite	Actually, you should buy the cheapest, and put a skin on it.