# libnickel.so.1.0.0 in firmware 3.19.5761 (0e028f3185)
# For use by patch32lsb v0.10 or later.
#
# Lines beginning with '#' (such as this one) are treated as comments (ignored.)
# To 'comment out' a line means to insert a '#' character at the beginning.
# To 'uncomment' a line means to remove the '#' character from the beginning.
# Some patch options are commented out, and can be enabled by uncommenting.
#
#
# The following two patches are alternatives, don't enable both at once.
#
# `Disable reading footer`
# `Custom reading footer style`
#
<Patch>
patch_name = `Disable reading footer`
patch_enable = `no`
# Multi-version patch: 3.19.5613 - 3.19.5761+
# patch_group = `Reading footer alternatives`
#
## Removes the reading footer for both ePub and KePub books, leaving a 15px
## bottom margin which matches the 15px built-in top margin of ePub books.
#
find_base_address = `ReadingFooter {\n\tqproperty-footerMargin: 105;\n}\n\n`
replace_string = 0000, `ReadingFooter {\n\tqproperty-footerMargin: 105;\n}\n\n`,`ReadingFooter{min-height:15px;max-height:15px;}\n`
#
find_base_address = `#caption {\n\tfont-size: 16px;`
Replace_string = 0000, `#caption {\n\tfont-size: 16px;\n}\n\n#caption[qApp_deviceIsPhoenix="true"] {\n\tfont-size: 20px;\n}`, `#caption{font-size:1px;color:transparent;}\n`
</Patch>
<Patch>
patch_name = `Custom reading footer style`
patch_enable = `no`
# Multi-version patch: 3.19.5613 - 3.19.5761+
# patch_group = `Reading footer alternatives`
#
## This patch customises the following properties of the reading footer:
##
## * Footer height (the amount of the screen reserved for the footer.)
## * Caption font size (Caption = page number or other progress indicator)
## * Caption top margin, which changes its vertical position within the footer.
## * Caption font family.
#
# When editing the replacement values below, BE CAREFUL NOT TO CHANGE THE LENGTH
# OF THE REPLACEMENT STRING! If a replacement string is too long you will get
# an error when making the patch, but if one is too short then there will be no
# error, but strange things will happen to the reading footer.
#
find_base_address = `ReadingFooter {\n\tqproperty-footerMargin: 105;\n}\n\n`
replace_string = 0000, `ReadingFooter {\n\tqproperty-footerMargin: 105;\n}\n\nReadingFooter[qApp_deviceIsDragon="true"] {\n\tqproperty-footerMargin: 170;\n}`, `ReadingFooter { qproperty-footerMargin: 105; min-height: 70px; max-height: 70px; }`
#
# Example replacement footer height values: Touch/Mini
#replace_string = 001A, `footerMargin: 105;`, `footerMargin: 105;`
#replace_string = 002D, `min-height: 70px;`, `min-height: 32px;`
#replace_string = 003F, `max-height: 70px;`, `max-height: 32px;`
# Example replacement footer height values: Glo/Aura
replace_string = 001A, `footerMargin: 105;`, `footerMargin: 105;`
replace_string = 002D, `min-height: 70px;`, `min-height: 40px;`
replace_string = 003F, `max-height: 70px;`, `max-height: 40px;`
# Example replacement footer height values: AuraHD/H2O/GloHD
#replace_string = 001A, `footerMargin: 105;`, `footerMargin: 170;`
#replace_string = 002D, `min-height: 70px;`, `min-height: 52px;`
#replace_string = 003F, `max-height: 70px;`, `max-height: 52px;`
#
#
find_base_address = `#caption {\n\tfont-size: 16px;`
Replace_string = 0000, `#caption {\n\tfont-size: 16px;\n}\n\n#caption[qApp_deviceIsPhoenix="true"] {\n\tfont-size: 20px;\n}\n\n#caption[qApp_deviceIsDragon="true"] {\n\tfont-size: 26px;\n}\n\n#caption[qApp_deviceIsAlyssum="true"] {\n\tfont-size: 30px;\n}\n\n#caption[qApp_localeName="ja_JP"] {\n\tfont-family: Sans-SerifJP;\n}`, `#caption {font-size: 16px;margin-top: 00px;}\n#caption[qApp_deviceIsPhoenix="true"] {font-size: 20px;}\n#caption[qApp_deviceIsDragon="true"] {font-size: 26px;}\n#caption[qApp_deviceIsAlyssum="true"] {font-size: 30px;}\n#caption[qApp_localeName="ja_JP"] {font-family: Sans-SerifJP;}`
#
# Replacement caption font size value for Touch/Mini:
replace_string = 000A, `font-size: 16px;`, `font-size: 16px;`
# Replacement caption font size value for Glo/Aura:
replace_string = 0054, `font-size: 20px;`, `font-size: 20px;`
# Replacement caption font size value for AuraHD/H2O:
replace_string = 008C, `font-size: 26px;`, `font-size: 26px;`
# Replacement caption font size value for GloHD:
replace_string = 00C5, `font-size: 30px;`, `font-size: 30px;`
#
# Replacement caption top margin value for all devices:
# (A negative top margin moves the caption text upwards,
# further from the bezel and closer to the page content.)
replace_string = 001A, `margin-top: 00px;`, `margin-top:-10px;`
#
# Uncomment to use a fixed replacement caption font family, for all devices:
# (You can change Avenir to another font name of your choice, but Avenir or
# Georgia are recommended because other fonts may not be loaded when the book
# is first opened and so might cause problems. Unlike other strings it is OK
# if this replacement string is a bit longer or shorter than the original.)
#replace_string = 00D7, `#caption[qApp_localeName="ja_JP"] {font-family: Sans-SerifJP;}`, `#caption {font-family: Georgia;}
</Patch>
<Patch>
patch_name = `My 15 line spacing values`
patch_enable = `yes`
#
## This patch changes the line spacing set by the line spacing adjustment
## slider, allowing much narrower line spacing to be set. It is recommended to
## select your own custom spacings by editing the replace_float lines at the
## bottom of this patch, as the defaults will not suit everyone.
#
# load val1 from new table
replace_bytes = 616E2C, 00 23 00 22 C3 F6 F0 73, 00 46 40 A3 D3 E9 00 23
# load val5 from new table
replace_bytes = 616E84, 43 F2 33 33 4F F0 33 32, 2C A3 D3 E9 00 23 00 46
replace_bytes = 616E8C, C3 F6 F3 73, 00 46 00 46
# load val7 from new table
replace_bytes = 616EB2, 00 23 00 22 C3 F6 F8 73, 00 46 22 A3 D3 E9 00 23
# load val10 from new table
replace_bytes = 616EF0, 00 22 4F F0 80 43, 15 A3 D3 E9 00 23
# load val11-val14 from old table in a loop to make room for new table
replace_bytes = 616F04, 48 A3 D3 E9 00 23 07 F1, 48 A7 00 26 D7 E9 00 23
replace_bytes = 616F0C, 80 01 20 46 61 E9 0A 23, 20 A9 31 44 61 E9 0A 23
replace_bytes = 616F14, FC F5 48 E8 45 A3 D3 E9, 20 46 FC F5 48 E8 08 36
replace_bytes = 616F1C, 00 23 07 F1 80 01 20 46, 08 37 20 2E F2 D1 00 AF
# load val15 from new table, jump over new table
replace_bytes = 616F24, 61 E9 08 23 FC F5 3E E8, 0A A3 D3 E9 00 23 17 E0
# new table, inial values 1.0, 1.2, 1.5, 2.0, 3.0
replace_bytes = 616F30, 00 23 07 F1 80 01 20 46, 00 00 00 00 00 00 F0 3F
replace_bytes = 616F38, 61 E9 06 23 FC F5 34 E8, 33 33 33 33 33 33 F3 3F
replace_bytes = 616F40, 3F A3 D3 E9 00 23 07 F1, 00 00 00 00 00 00 F8 3F
replace_bytes = 616F48, 80 01 20 46 61 E9 04 23, 00 00 00 00 00 00 00 40
replace_bytes = 616F50, FC F5 2A E8 00 23 00 22, 00 00 00 00 00 00 08 40
#
# 15 values for replacement, change these to suit:
replace_float = 616F30, 1.0, 0.7
replace_float = 616FF8, 1.05, 0.75
replace_float = 617000, 1.07, 0.8
replace_float = 617008, 1.1, 0.82
replace_float = 616F38, 1.2, 0.84
replace_float = 617010, 1.35, 0.86
replace_float = 616F40, 1.5, 0.88
replace_float = 617018, 1.7, 0.9
replace_float = 617020, 1.8, 0.92
replace_float = 616F48, 2.0, 0.94
replace_float = 617028, 2.2, 0.96
replace_float = 617030, 2.4, 0.98
replace_float = 617038, 2.6, 1.0
replace_float = 617040, 2.8, 1.05
replace_float = 616F50, 3.0, 1.1
#
# The 15 line spacing values above should allow the line spacing to be adjusted
# in increments of one pixel when using a medium sized font on a high resolution
# device. If you use a small font size and/or a lower resolution device you may
# find that increasing the slider one step at a time doesn't always result in a
# line spacing change at each step. In that case, you might want to use 15
# replacement values that are not quite so close together. For example:
#
# 0.7 0.75 0.8 0.825 0.85 0.875 0.9 0.925 0.95 0.975 1.0 1.05 1.1 1.15 1.2
#
# Also note that the KEPUB reader has problems when the line spacing value is
# set too low, depending on the font used. Most of the built-in fonts are okay
# down to about 0.9. If you only read KePub books then you might want to remove
# some of the lower values and add some more of the higher ones. For example:
#
# 0.9 0.925 0.95 0.975 1.0 1.025 1.05 1.075 1.1 1.15 1.2 1.25 1.3 1.35 1.4
#
</Patch>
<Patch>
patch_name = `Custom left & right margins`
patch_enable = `yes`
# Multi-version patch: 2.8.1 - 3.19.5761+
#
## This patch sets the size of the margins added by the margins adjustment
## slider, as a percentage of screen width.
#
find_base_address = `\0\0\0\0\x02\0\0\0\x04\0\0\0\x06\0\0\0\x08\0\0\0\ x0A\0\0\0\x0C\0\0\0\x0E\0\0\0\x10\0\0\0`
# 9 values for replacement:
replace_int = 0000, 00, 00
replace_int = 0004, 02, 01
replace_int = 0008, 04, 02
replace_int = 000C, 06, 03
replace_int = 0010, 08, 04
replace_int = 0014, 10, 05
replace_int = 0018, 12, 06
replace_int = 001C, 14, 07
replace_int = 0020, 16, 08
</Patch>
<Patch>
patch_name = `Custom font sizes`
patch_enable = `no`
#
## Unpatched font sizes depend on the device's screen resolution:
##
## GloHD: 14px - 150px (48 sizes)
## AuraHD/H2O: 12px - 150px (50 sizes)
## Glo/Aura: 12px - 122px (43 sizes)
## Touch/Mini: 12px - 90px (35 sizes)
##
## Unpatched sizes increase in steps of 1 from the smallest size up to size 22,
## then in steps of 2 up to size 50, then in steps of 4 up to the largest size.
##
## I don't know how many sizes are allowed, but it is probably safe to use 50.
##
## The example replacement values in this patch result in the following ranges,
## with increases in steps of 1 from the smallest size up to size 48, then
## steps of 2 up to size 60, then steps of 4 up to the largest size:
##
## GloHD: 14px - 88px (48 sizes)
## AuraHD/H2O: 12px - 88px (50 sizes)
## Glo/Aura: 12px - 80px (48 sizes)
## Touch/Mini: 12px - 80px (48 sizes)
#
# Start with this font size: (GloHD, Others)
replace_int = 8C95B6, 14, 14
replace_int = 8C95BA, 12, 12
#
# Add font sizes in increments of 1 until this size exceeded:
replace_int = 8C95EC, 21, 47
#
# Continue from this font size:
replace_int = 8C95F2, 22, 48
#
# Add font sizes in increments of 2 until this size exceeded:
replace_int = 8C9680, 49, 59
replace_int = 8C969C, 49, 59
#
# Continue from this font size:
replace_int = 8C96A2, 50, 60
#
# Add font sizes in increments of 4 until this size exceeded:
# (GloHD/AuraHD/H2O, Glo/Aura, Touch/Mini)
replace_int = 8C95C6, 150, 88
replace_int = 8C9712, 122, 80
replace_int = 8C9716, 90, 80
</Patch>
<Patch>
patch_name = `Brightness fine control`
patch_enable = `yes`
#
## Tapping the sun symbols increases/Decreases the frontlight brightness by 1
## instead of by 10.
#
replace_int = 8A21C2, 10, 01
replace_int = 8A21F2, 10, 01
</Patch>
<Patch>
patch_name = `Search in Library by default`
patch_enable = `yes`
#
## Tapping the search bar on the home screen defaults to Library search
## instead of Bookstore search.
#
# SearchEditBox.setSearchType(0) --> SearchEditBox.setSearchType(1)
replace_bytes = 952056, 41 46, 01 21
</Patch>
<Patch>
patch_name = `Freedom to advanced fonts control`
patch_enable = `yes`
#
## This patch allows the advanced font options (weight/sharpness adjustments)
## to work with sideloaded fonts too. (KEPUB: OTF and TTF. EPUB: TTF only.)
##
## WARNING: IT IS NOT SAFE TO ENABLE THIS PATCH IF YOUR DEVICE IS SET TO A
## JAPANESE LOCALE OR JAPANESE BOOKS ARE OPENED.
#
# VolumeManager.isJapanese(a) --> False
replace_bytes = 61466C, F0 F5 36 E9, 00 20 00 20
# N3FontTypeUtil.setupMonotypeDropdown(b,c)
# --> N3FontTypeUtil.setupDropdown(UNDEFINED,b,c) e31890 412ed8
replace_bytes = 79637A, 58 46 51 46, 59 46 52 46
replace_bytes = 79637E, 66 F4 94 EC, 7C F4 AC ED
# N3FontTypeController.setupAdvancedOption --> NOP
replace_bytes = 8C6360, 60 F7 C0 E5, 00 46 00 46
replace_bytes = 8C7a46, 5F F7 4E E2, 00 46 00 46
</Patch>
<Patch>
patch_name = `Allow download all in Browser`
patch_enable = `no`
#
## Allow the browser to download any file, not just the types it recognises.
#
replace_bytes = 7D47D0, 50 F4 E0 E9, 01 20 01 20
</Patch>
#
# The following two patches are mutually incompatible, don't enable both.
#
# `ePub fixed/adjustable top/bottom margins`
# `ePub disable built-in body padding-bottom`
#
<Patch>
patch_name = `ePub fixed/adjustable top/bottom margins`
patch_enable = `no`
# patch_group = `ePub padding-bottom alternatives`
#
## This patch sets the @page margin sizes in epubs, overriding any @page margin
## set in the book's CSS stylesheet (but not in the XPGT stylesheet, see below).
##
## By default the top and bottom margins are set to be adjustable, their size
## similar to the left/right margin size set by the adjustment slider. There
## are options to set the top and/or bottom margin to a fixed size instead.
##
## Note that @page margins are seperate from (and overlap) both the body margins
## set in the book and the left/right margins set from the adjustment slider,
## and are added to any page margins set in the Adobe XPGT stylesheet if the
## book has one (e.g. page-template.xpgt). For this reason you might want to
## consider using the Modify ePub Calibre plugin to remove any body margins and
## XPGT stylesheet margins before sideloading the book, or perhaps enabling the
## `Ignore ePub Adobe XPGT stylesheet (page-template.xpgt)` patch.
##
## Also note that a side-effect of this patch is that the body padding-bottom is
## removed from the built-in stylesheet, which means that there will no longer
## be a blank line added automatically at the end of chapters.
##
## See at the bottom of the patch for replacement values that can be used to
## tune the size of the margins to suit different devices and reading modes.
#
#
# Push an extra 8 bytes of scratch space onto the stack
replace_bytes = 4742FA, BD B0, BF B0
replace_bytes = 474300, 02 AF, 04 AF
# Save this value for the third stack argument of our later function call
replace_bytes = 474662, AD F8 04 20, 02 92 01 92
# getReadingLineHeight(...) --> getReadingLeftMargin(...) e2fbb0 40d290
replace_bytes = 4746B0, B5 F7 78 EA, 98 F7 EE ED
#
replace_bytes = 4746B4, 20 22 4F F0 FF 33, 00 23 01 22 0A 21
replace_bytes = 4746BA, 07 F1 50 0A, 00 93 01 91
replace_bytes = 4746BE, AD F8 04 20 00 93, 42 43 92 08 01 3A
replace_bytes = 4746C4, 50 46 29 46, B8 BF 00 22
replace_bytes = 4746C8, 00 22 67 23, 18 A8 29 46
# QString.arg(double, ...) --> QString.arg(int64, ...) e2f91c 40ca54
replace_bytes = 4746CC, A3 F7 84 EA, 98 F7 C2 E9
# mov r1,sl; --> adds r1,sp,#96
replace_bytes = 4746D2, 51 46, 18 A9
# (Remember to pop scratch space if necessary)
#
# padding-bottom: %1em !important;\n
# --> }@page{margin:%1px 00px %1px}body{
replace_string = B8A188, `\x20\0p\0a\0d\0d\0i\0n\0g\0-\0b\0o\0t\0t\0o\0m\0:\0 \0%\01\0e\0m\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0\n\0`, `}\0@\0p\0a\0g\0e\0{\0m\0a\0r\0g\0i\0n\0:\0%\01\0p \0x\0 \00\00\0p\0x\0 \0%\01\0p\0x\0}\0b\0o\0d\0y\0{\0`
#
#
# *** Replacement values start here, don't change anything above ***
#
# Optional replacement value: Uncomment for a FIXED TOP MARGIN size in px,
# default 25px. Replacement value is margin size, two digits separated by \0
# (Leave commented out for an adjustable top margin.)
#replace_string = B8A1A4, `%\01`, `2\05`
#
# Optional replacement value: Uncomment for a FIXED BOTTOM MARGIN size in px,
# default 00px. Replacement value is margin size, two digits separated by \0
# (Leave commented out for an adjustable bottom margin.)
#replace_string = B8A1B8, `%\01`, `0\00`
#
# Optional replacement value: Uncomment to set the minimum LEFT/RIGHT MARGIN
# size in px, default 15px. (This margin will overlap the left/right margin
# set with the adjustment slider, not add to it.) Replacement value is margin
# size, two digits separated by \0
#replace_string = B8A1AE, `0\00`, `1\05`
#
# Replacement value: Sets the step-size of the ADJUSTABLE top/bottom margin
# (if any) in quarter-pixels. These suggested values should be very close to
# the 1% step size of the left/right margins set by the slider. Larger values
# will make the top/bottom margins larger than the left/right margins.
# Suggested values: 24 (Touch/Mini), 30 (Glo/Aura), 43 (AuraHD/H2O/GloHD)
replace_int = 4746B6, 1, 30
#
# Replacement value: Set this to the size of the device's built-in top margin,
# in pixels. This value is subtracted from the adjustable top/bottom margin
# (if any) to compensate for any unremovable built-in top margin.
# Suggested values are:
# 0 For full-screen reading mode (fullScreenReading=true, all devices)
# 15 for normal reading mode (Glo/GloHD, not sure for other devices)
replace_int = 4746C2, 1, 0
</Patch>
<Patch>
patch_name = `ePub disable built-in body padding-bottom`
patch_enable = `no`
# Multi-version patch: 3.3.0 - 3.19.5761+
# patch_group = `ePub padding-bottom alternatives`
#
## The built-in ePub stylesheet adds a line of padding at the bottom of the
## body element, to prevent the chapter ending on the last line of a page.
## This patch disables that stylesheet entry.
##
## This patch is not compatible with `ePub fixed/adjustable top/bottom margins`
## patch, which already removes this stylesheet entry to make room for other
## things.
#
# padding-bottom: %1em !important;\n
# --> _adding-bottom: %1em !important;\n
#
find_base_address = `\x20\0p\0a\0d\0d\0i\0n\0g\0-\0b\0o\0t\0t\0o\0m\0:\0 \0%\01\0e\0m\0`
replace_string = 0002, `p`, `_`
</Patch>
#
# The following two patches are alternatives, don't enable more than one.
#
# `Custom page refresh options (1,2,3,...,12)`
# `Custom page refresh options (1,2,4,8,16,32,64,128)`
#
# These two patches don't affect the Aura. See below for Aura-only patches.
#
<Patch>
patch_name = `Custom page refresh options (1,2,3,...,12)`
patch_enable = `yes`
# patch_group = `Page refresh alternatives`
#
## Allows the page refresh to be set in the range 1-12 pages,
## instead of just 1-6 pages. This patch doesn't affect the Aura.
#
# cmp r5, #7; bne.n; --> cmp r5, #6; bls.n;
replace_bytes = 79C368, 07 2D 9A D1, 06 2D 9A D9
#
# Replacement: Base (use this value for the first menu option):
replace_int = 79C298, 1, 1
# Replacement: Increment (add this value to get each successive menu option):
replace_int = 79C366, 1, 1
# Replacement: Maxmium (stop adding options when this value is exceeded):
replace_int = 79C368, 6, 12
</Patch>
<Patch>
patch_name = `Custom page refresh options (1,2,4,8,16,32,64,128)`
patch_enable = `no`
# patch_group = `Page refresh alternatives`
#
## Allows the page refresh to be set to 1,2,4,8,16,32,64, or 128 pages,
## instead of just 1-6 pages. This patch doesn't affect the Aura.
#
# cmp r5, #7; bne.n; --> cmp r5, #6; bls.n;
replace_bytes = 79C368, 07 2D 9A D1, 06 2D 9A D9
#
# Replacement: Base (use this value for the first menu option):
replace_int = 79C298, 1, 1
# Double to get each successive menu option:
replace_bytes = 79C366, 01 35, 6D 00
# Replacement: Maxmium (stop adding options when this value is exceeded):
replace_int = 79C368, 6, 128
</Patch>
#
# The following two patches are alternatives, don't enable more than one.
#
# `Custom page refresh options (1,8,32,Chapter -- Aura only)`
# `Custom page refresh options (1,32,99,Chapter -- Aura only)`
#
# These two patches only affect the Aura. See above for other devices.
#
<Patch>
patch_name = `Custom page refresh options (1,8,32,Chapter -- Aura only)`
patch_enable = `no`
# patch_group = `Aura page refresh alternatives`
#
## Allows the page refresh to be set to 1, 8, or 32 pages instead of
## 1, 5, or 10 pages. This patch only affects the Aura.
#
# 1,5,10,Chapter
# --> 1,8,32,Chapter
#
replace_int = 79C4BC, 4, 7
replace_int = 79C4CE, 5, 8
replace_int = 79C6A0, 4, 7
replace_int = 79C6B8, 5, 8
replace_int = 79C726, 5, 8
replace_string = BC9890, `5 pages`, `8 pages`
#
replace_int = 79C558, 9, 31
replace_int = 79C56A, 10, 32
replace_int = 79C83E, 9, 31
replace_int = 79C856, 10, 32
replace_int = 79C8B2, 10, 32
replace_string = BC9898, `10 pages`, `32 pages`
</Patch>
<Patch>
patch_name = `Custom page refresh options (1,32,99,Chapter -- Aura only)`
patch_enable = `no`
# patch_group = `Aura page refresh alternatives`
#
## Allows the page refresh to be set to 1, 32, or 99 pages instead of
## 1, 5, or 10 pages. This patch only affects the Aura.
#
# 1,5,10,Chapter
# --> 1,32,99,Chapter
#
replace_int = 79C4BC, 4, 31
replace_int = 79C4CE, 5, 32
replace_int = 79C6A0, 4, 31
replace_int = 79C6B8, 5, 32
replace_int = 79C726, 5, 32
replace_string = BC9890, `5 pages`, `32 page`
#
replace_int = 79C558, 9, 98
replace_int = 79C56A, 10, 99
replace_int = 79C83E, 9, 98
replace_int = 79C856, 10, 99
replace_int = 79C8B2, 10, 99
replace_string = BC9898, `10 pages`, `99 page`
</Patch>
<Patch>
patch_name = `Remove system fonts in Reader list`
patch_enable = `no`
#
## Removes Amasis, Avenir, Caecilia, Georgia, Gill Sans, Kobo Nickel, Malabar.
## BEWARE: Also removes sideloaded Delima, Felbridge, Rockwell, Times New Roman.
#
replace_bytes = 8CA05C, 3C F7 7E E4, 00 46 00 46
</Patch>
<Patch>
patch_name = `Remove non-system fonts in Reader list`
patch_enable = `no`
#
## Removes Kobo Tsukushi Mincho, Kobo UD Kakugo, OpenDyslexic.
## BEWARE: Also removes other sideloaded fonts.
#
replace_bytes = 8CA08A, 3C F7 68 E4, 00 46 00 46
</Patch>
#
# The following four patches are alternatives, don't enable more than one.
#
# `Cyrillic keyboard`
# `Arabic keyboard`
# `Hebrew keyboard`
# `Turkish keyboard`
#
<Patch>
patch_name = `Cyrillic keyboard`
patch_enable = `no`
# patch_group = `Keyboard alternatives`
#
## Replaces keys on the Extended Latin keypad with Cyrillic alternatives.
#
# Enable uppercase for `ß` key
replace_bytes = 851C38, 00 24, 01 24
# Replace layout sign
find_base_address = `ÉÀÇ`
replace_string = 0000, `ÉÀÇ`, `абв`
# Change keyboard layout
find_base_address = `æ\0\0à\0\0è\0\0ì\0\0`
# Second row, left to right:
# (for Touch/Mini/Glo/Aura the first key moves to top row, first column.)
replace_string = 0000, `æ\0`, `й`
replace_string = 0004, `à\0`, `ц`
replace_string = 0008, `è\0`, `у`
replace_string = 000C, `ì\0`, `к`
replace_string = 0010, `ò\0`, `е`
replace_string = 0014, `ù\0`, `н`
replace_string = 0018, `á\0`, `г`
replace_string = 001C, `é\0`, `ш`
replace_string = 0020, `í\0`, `щ`
replace_string = 0024, `ó\0`, `з`
replace_string = 0028, `ú\0`, `х`
replace_string = 002C, `ý\0`, `ъ`
# Third row, left to right:
# (for Touch/Mini/Glo/Aura the first key moves to top row, second column.)
replace_string = 0030, `œ\0`, `ф`
replace_string = 0034, `â\0`, `ы`
replace_string = 0038, `ê\0`, `в`
replace_string = 003C, `î\0`, `а`
replace_string = 0040, `ô\0`, `п`
replace_string = 0044, `û\0`, `р`
replace_string = 0048, `ä\0`, `о`
replace_string = 004C, `ë\0`, `л`
replace_string = 0050, `ï\0`, `д`
replace_string = 0054, `ö\0`, `ж`
replace_string = 0058, `ü\0`, `э`
replace_string = 005C, `ÿ\0`, `ё`
# Bottom row, left to right:
replace_string = 0060, `ã\0`, `я`
replace_string = 0064, `ñ\0`, `ч`
replace_string = 0068, `õ\0`, `с`
replace_string = 006C, `å\0`, `м`
replace_string = 0070, `ß\0`, `и`
replace_string = 0074, `ç\0`, `т`
replace_string = 0078, `đ\0`, `ь`
replace_string = 007C, `ø\0`, `б`
replace_string = 0080, `ij\0`, `ю`
replace_string = 0084, `ł\0`, `.`
#
# Top row: Extra keys for Touch/Mini/Glo/Aura only.
# (This patch cannot change the top row of the AuraHD/H2O/GloHD keypad.)
find_base_address = `ƒ\0\0þ\0\0š\0\0ž\0\0`
# Top row: columns 1-2 (see first key of second/third rows above.)
# Top row: columns 3-5
replace_string = 0004, `þ\0`, `!`
replace_string = 0008, `š\0`, `"`
replace_string = 000C, `ž\0`, `?`
# Top row: column 6 is a duplicate of the last key on the bottom row.
# Top row: columns 7-10
replace_string = 0000, `ƒ\0`, `,`
replace_string = 0010, `μ\0`, `(`
replace_string = 0014, `ª\0`, `)`
replace_string = 0018, `º\0`, `-`
</Patch>
<Patch>
patch_name = `Arabic keyboard`
patch_enable = `no`
# Multi-version patch: 3.8.0 - 3.19.5761+
# patch_group = `Keyboard alternatives`
#
## Replaces keys on the Extended Latin keypad with Arabic alternatives.
## Note that after the device boots, the keypad will just show blank squares
## until the first book has been opened.
#
# Replace layout sign
find_base_address = `ÉÀÇ`
replace_string = 0000, `ÉÀÇ`, `ع`
# Change keyboard layout
find_base_address = `æ\0\0à\0\0è\0\0ì\0\0`
# Second row, left to right:
# (for Touch/Mini/Glo/Aura the first key moves to top row, first column.)
replace_string = 0000, `æ\0`, `ذ`
replace_string = 0004, `à\0`, `ص`
replace_string = 0008, `è\0`, `ث`
replace_string = 000C, `ì\0`, `ق`
replace_string = 0010, `ò\0`, `ف`
replace_string = 0014, `ù\0`, `غ`
replace_string = 0018, `á\0`, `ع`
replace_string = 001C, `é\0`, `ه`
replace_string = 0020, `í\0`, `خ`
replace_string = 0024, `ó\0`, `ح`
replace_string = 0028, `ú\0`, `ج`
replace_string = 002C, `ý\0`, `د`
# Third row, left to right:
# (for Touch/Mini/Glo/Aura the first key moves to top row, second column.)
replace_string = 0030, `œ\0`, `ض`
replace_string = 0034, `â\0`, `ش`
replace_string = 0038, `ê\0`, `س`
replace_string = 003C, `î\0`, `ي`
replace_string = 0040, `ô\0`, `ب`
replace_string = 0044, `û\0`, `ل`
replace_string = 0048, `ä\0`, `ا`
replace_string = 004C, `ë\0`, `ت`
replace_string = 0050, `ï\0`, `ن`
replace_string = 0054, `ö\0`, `م`
replace_string = 0058, `ü\0`, `ك`
replace_string = 005C, `ÿ\0`, `ط`
# Bottom row, left to right:
replace_string = 0060, `ã\0`, `ئ`
replace_string = 0064, `ñ\0`, `ء`
replace_string = 0068, `õ\0`, `ؤ`
replace_string = 006C, `å\0`, `ر`
replace_string = 0070, `ß\0`, `ى`
replace_string = 0074, `ç\0`, `ة`
replace_string = 0078, `đ\0`, `و`
replace_string = 007C, `ø\0`, `ز`
replace_string = 0080, `ij\0`, `ظ`
replace_string = 0084, `ł\0`, `.`
#
# Top row: Extra keys for Touch/Mini/Glo/Aura only.
# (This patch cannot change the top row of the AuraHD/H2O/GloHD keypad.)
find_base_address = `ƒ\0\0þ\0\0š\0\0ž\0\0`
# Top row: columns 1-2 (see first key of second/third rows above.)
# Top row: columns 3-5
replace_string = 0004, `þ\0`, `أ`
replace_string = 0008, `š\0`, `إ`
replace_string = 000C, `ž\0`, `آ`
# Top row: column 6 is a duplicate of the last key on the bottom row.
# Top row: columns 7-10
replace_string = 0000, `ƒ\0`, `,`
replace_string = 0010, `μ\0`, `(`
replace_string = 0014, `ª\0`, `)`
replace_string = 0018, `º\0`, `-`
</Patch>
<Patch>
patch_name = `Hebrew keyboard`
patch_enable = `no`
# Multi-version patch: 3.8.0 - 3.19.5761+
# patch_group = `Keyboard alternatives`
#
## Replaces keys on the Extended Latin keypad with Hebrew alternatives.
## Note that after the device boots, the keypad will just show blank squares
## until the first book has been opened.
#
# Replace layout sign
find_base_address = `ÉÀÇ`
replace_string = 0000, `ÉÀÇ`, `אב`
# Change keyboard layout
find_base_address = `æ\0\0à\0\0è\0\0ì\0\0`
# Second row, left to right:
# (for Touch/Mini/Glo/Aura the first key moves to top row, first column.)
replace_string = 0000, `æ\0`, `@`
replace_string = 0004, `à\0`, `'`
replace_string = 0008, `è\0`, `/`
replace_string = 000C, `ì\0`, `ק`
replace_string = 0010, `ò\0`, `ר`
replace_string = 0014, `ù\0`, `א`
replace_string = 0018, `á\0`, `ט`
replace_string = 001C, `é\0`, `ו`
replace_string = 0020, `í\0`, `ן`
replace_string = 0024, `ó\0`, `ם`
replace_string = 0028, `ú\0`, `פ`
replace_string = 002C, `ý\0`, `-`
# Third row, left to right:
# (for Touch/Mini/Glo/Aura the first key moves to top row, second column.)
replace_string = 0030, `œ\0`, `,`
replace_string = 0034, `â\0`, `ש`
replace_string = 0038, `ê\0`, `ד`
replace_string = 003C, `î\0`, `ג`
replace_string = 0040, `ô\0`, `כ`
replace_string = 0044, `û\0`, `ע`
replace_string = 0048, `ä\0`, `י`
replace_string = 004C, `ë\0`, `ח`
replace_string = 0050, `ï\0`, `ל`
replace_string = 0054, `ö\0`, `ך`
replace_string = 0058, `ü\0`, `ף`
replace_string = 005C, `ÿ\0`, `_`
# Bottom row, left to right:
replace_string = 0060, `ã\0`, `ז`
replace_string = 0064, `ñ\0`, `ס`
replace_string = 0068, `õ\0`, `ב`
replace_string = 006C, `å\0`, `ה`
replace_string = 0070, `ß\0`, `נ`
replace_string = 0074, `ç\0`, `מ`
replace_string = 0078, `đ\0`, `צ`
replace_string = 007C, `ø\0`, `ת`
replace_string = 0080, `ij\0`, `ץ`
replace_string = 0084, `ł\0`, `.`
#
# Top row: Extra keys for Touch/Mini/Glo/Aura only.
# (This patch cannot change the top row of the AuraHD/H2O/GloHD keypad.)
find_base_address = `ƒ\0\0þ\0\0š\0\0ž\0\0`
# Top row: columns 1-2 (see first key of second/third rows above.)
# Top row: columns 3-5
replace_string = 0004, `þ\0`, `!`
replace_string = 0008, `š\0`, `"`
replace_string = 000C, `ž\0`, `?`
# Top row: column 6 is a duplicate of the last key on the bottom row.
# Top row: columns 7-10
replace_string = 0000, `ƒ\0`, `:`
replace_string = 0010, `μ\0`, `)`
replace_string = 0014, `ª\0`, `(`
replace_string = 0018, `º\0`, `;`
</Patch>
<Patch>
patch_name = `Turkish keyboard`
patch_enable = `no`
# patch_group = `Keyboard alternatives`
#
## Replaces keys on the Extended Latin keypad with Turkish alternatives.
#
# Enable uppercase for `ß` key
replace_bytes = 851C38, 00 24, 01 24
# Replace layout sign
find_base_address = `ÉÀÇ`
replace_string = 0000, `ÉÀÇ`, `EN/TR`
# Change keyboard layout
find_base_address = `æ\0\0à\0\0è\0\0ì\0\0`
# Second row, left to right:
# (for Touch/Mini/Glo/Aura the first key moves to top row, first column.)
replace_string = 0000, `æ\0`, `!`
replace_string = 0004, `à\0`, `q`
replace_string = 0008, `è\0`, `w`
replace_string = 000C, `ì\0`, `e`
replace_string = 0010, `ò\0`, `r`
replace_string = 0014, `ù\0`, `t`
replace_string = 0018, `á\0`, `y`
replace_string = 001C, `é\0`, `u`
replace_string = 0020, `í\0`, `ı`
replace_string = 0024, `ó\0`, `o`
replace_string = 0028, `ú\0`, `p`
replace_string = 002C, `ý\0`, `ü`
# Third row, left to right:
# (for Touch/Mini/Glo/Aura the first key moves to top row, second column.)
replace_string = 0030, `œ\0`, `’`
replace_string = 0034, `â\0`, `a`
replace_string = 0038, `ê\0`, `s`
replace_string = 003C, `î\0`, `d`
replace_string = 0040, `ô\0`, `f`
replace_string = 0044, `û\0`, `g`
replace_string = 0048, `ä\0`, `h`
replace_string = 004C, `ë\0`, `j`
replace_string = 0050, `ï\0`, `k`
replace_string = 0054, `ö\0`, `l`
replace_string = 0058, `ü\0`, `ş`
replace_string = 005C, `ÿ\0`, `ğ`
# Bottom row, left to right:
replace_string = 0060, `ã\0`, `z`
replace_string = 0064, `ñ\0`, `x`
replace_string = 0068, `õ\0`, `c`
replace_string = 006C, `å\0`, `v`
replace_string = 0070, `ß\0`, `b`
replace_string = 0074, `ç\0`, `n`
replace_string = 0078, `đ\0`, `m`
replace_string = 007C, `ø\0`, `ö`
replace_string = 0080, `ij\0`, `ç`
replace_string = 0084, `ł\0`, `i`
#
# Top row: Extra keys for Touch/Mini/Glo/Aura only.
# (This patch cannot change the top row of the AuraHD/H2O/GloHD keypad.)
find_base_address = `ƒ\0\0þ\0\0š\0\0ž\0\0`
# Top row: columns 1-2 (see first key of second/third rows above.)
# Top row: columns 3-5
replace_string = 0004, `þ\0`, `?`
replace_string = 0008, `š\0`, `”`
replace_string = 000C, `ž\0`, `-`
# Top row: column 6 is a duplicate of the last key on the bottom row.
# Top row: columns 7-10
replace_string = 0000, `ƒ\0`, `:`
replace_string = 0010, `μ\0`, `;`
replace_string = 0014, `ª\0`, `,`
replace_string = 0018, `º\0`, `.`
</Patch>
<Patch>
patch_name = `Customise PinchGestureRecognizer`
patch_enable = `no`
# PinchGestureRecognizer::StationaryTolerance
replace_float = BB0F40, 5.0, 5.0
# PinchGestureRecognizer::UpdateTolerance
replace_float = BB0F48, 10.0, 10.0
# PinchGestureRecognizer::TriggerTolerance
replace_float = BB0F50, 30.0, 30.0
</Patch>
<Patch>
patch_name = `Margins fine tuning`
patch_enable = `no`
#
## Do not enable this patch unless you're sure you need it.
## It may cause the screen to be off-centre.
#
# Initial replaces
replace_bytes = 91BC04, 19 46, 00 21
replace_bytes = 91BC08, 1A 46, 00 22
# Values for replace
# Left margin
replace_int = 91BC04, 0, 10
# Top margin
replace_int = 91BC08, 0, 10
</Patch>
<Patch>
patch_name = `Custom kepub default margins`
patch_enable = `no`
#
## Sets the built-in minimum margin for KePub books and Pocket articles to
## zero, the same as it is in ePub books. This only affects left/right margins
## in normal reading mode, but all four margins in full-screen mode.
#
# Device = Glo/Aura, Type = pocket article or non-Japanese kepub
replace_int = 5BC58A, 25, 0
# Device = Glo/Aura, Type = Japanese kepub
replace_int = 5BC58C, 45, 0
# Device = Other, Type = Any
replace_int = 5BC59C, 20, 0
</Patch>
<Patch>
patch_name = `Block WiFi firmware upgrade`
patch_enable = `no`
# Multi-version patch: 3.3.0 - 3.19.5761+
#
## WARNING: THIS IS A DANGEROUS PATCH! READ THE INFORMATION BELOW CAREFULLY!
##
## THIS PATCH IS UNTESTED, as there is no way to be sure it still works until
## the next firmware version is released. If it works then the firmware will
## not be upgraded during a WiFi sync, but you will still be able to upgrade
## manually or by syncing with the Kobo desktop.
##
## THIS PATCH COULD RESULT IN A BOOT LOOP when signing out of your Kobo account
## (Settings > Accounts > Sign out) or when invoking a factory reset from the
## device information menu (Settings > Device information > Factory reset).
## REMOVE THIS PATCH BEFORE USING EITHER OF THOSE OPTIONS.
## A factory reset invoked using the hardware methods (such as holding down the
## light button while switching on) should not be affected.
#
find_base_address = `U\0p\0g\0r\0a\0d\0e\0C\0h\0e\0c\0k\0/\0%\01\0/\0%\02\0/\0%\03\0/\0%\04\0/\0%\05\0`
replace_string = 0026, `%\03\0/\0%\04\0/\0%\05\0`, `k\0/\09\09\0.\09\0/\05\0`
</Patch>
<Patch>
patch_name = `Custom footer (page number text)`
patch_enable = `no`
# Multi-version patch: 2.8.1 - 3.19.5761+
#
## Shortens the page number text in the reading footer, and perhaps elsewhere.
## E.g. "Page 1 of 2" becomes "1 / 2" (not sure how it affects translations)
#
find_base_address = `Page %1 <i>of</i> %2`
replace_string = 0000, `Page %1 <i>of</i> %2`, `%1 / %2`
</Patch>
<Patch>
patch_name = `Custom Sleep/Power-off timeouts`
patch_enable = `no`
#
## Changes the Sleep/Power-off timeout menu options from 5,10,15,30,45,60
## minutes to 10,20,30,60,120,240 minutes.
#
# Values displayed on both menus
replace_string = C3A334, `5 mins\0`, `10 mins`
replace_string = C3A33C, `10 mins`, `20 mins`
replace_string = C3A344, `15 mins`, `30 mins`
replace_string = C3A34C, `30 mins`, `1 hour`
replace_string = C3A354, `45 mins`, `2 hours`
replace_string = C3A35C, `60 mins`, `4 hours`
# Actual values used for sleep menu
replace_int = 9928CE, 5, 10
replace_int = 992918, 10, 20
replace_int = 99295C, 15, 30
replace_int = 9929A0, 30, 60
replace_int = 9929E4, 45, 120
replace_int = 992A28, 60, 240
# Actual values used for power menu
replace_int = 992ADC, 5, 10
replace_int = 992B20, 10, 20
replace_int = 992B62, 15, 30
replace_int = 992BA2, 30, 60
replace_int = 992BE2, 45, 120
replace_int = 992C20, 60, 240
</Patch>
<Patch>
patch_name = `Set kepub hyphenation`
patch_enable = `no`
#
## The built-in kepub stylesheet has a line "* { -webkit-hyphens: auto; }"
## to turn on hyphenation, but it is only used if the device's justification
## button is set to full justification. With this patch enabled hyphenation
## will always/never be turned on, regardless of justification button setting.
##
## (Note that if the publisher has set the hyphenation in the book's stylesheet
## then that will override the built-in stylesheet.)
#
# Alternative 1: Always turn kepub hyphenation on
replace_bytes = 91F34A, FB F6 9A E4, 01 20 01 20
#
# Alternative 2: Never turn kepub hyphenation on
#replace_bytes = 91F34A, FB F6 9A E4, 00 20 00 20
</Patch>
<Patch>
patch_name = `Fix three KePub fullScreenReading bugs`
patch_enable = `yes`
# Multi-version patch: 3.3.0 - 3.19.5761+
#
## (See
https://www.mobileread.com/forums/sho...0&postcount=16
## for screenshots and more information about the problems this patch fixes.)
##
## In full-screen reading mode (when the FullScreenReading feature setting is
## activated and the "Show header and footer" reading setting is unticked) the
## KePub reader has three problems:
##
## 1. If the book's stylesheet has non-zero body margin/padding, then the
## text is shifted to the right and can be cut off at the right margin.
## 2. Characters with large side bearing values (such as italic f, J) can
## be cut off if they appear at either end of a line.
## 3. Images which are supposed to be displayed inline (flowing with the text)
## are instead displayed centred in a seperate block.
##
## This patch fixes those problems by replacing the following faulty style,
## which is the cause of problem 3.:
##
## img {
## display: block;
## margin-left: auto !important;
## margin-right: auto !important;
## width: auto !important;
## height: auto !important;
## }
##
## with the following two styles, which work around problems 1. and 2.:
##
## body {
## margin: 0 !important;
## padding: 0 !important;
## }
##
## body>div {
## padding-left: 0.2em !important;
## padding-right: 0.2em !important;
## }
#
find_base_address = `\0i\0m\0g\0 \0{\0 \0d\0i\0s\0p\0l\0a\0y\0:\0 \0b\0l\0o\0c\0k\0;\0`
replace_string = 0001, `i\0m\0g\0 \0{\0 \0d\0i\0s\0p\0l\0a\0y\0:\0 \0b\0l\0o\0c\0k\0;\0 \0m\0a\0r\0g\0i\0n\0-\0l\0e\0f\0t\0:\0 \0a\0u\0t\0o\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0m\0a\0r\0g\0i\0n\0-\0r\0i\0g\0h\0t\0:\0 \0a\0u\0t\0o\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0w\0i\0d\0t\0h\0:\0 \0a\0u\0t\0o\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0h\0e\0i\0g\0h\0t\0:\0 \0a\0u\0t\0o\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0`, `b\0o\0d\0y\0 \0{\0 \0m\0a\0r\0g\0i\0n\0:\0 \00\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0p\0a\0d\0d\0i\0n\0g\0:\0 \00\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0 \0b\0o\0d\0y\0>\0d\0i\0v\0 \0{\0 \0p\0a\0d\0d\0i\0n\0g\0-\0l\0e\0f\0t\0:\0 \00\0.\02\0e\0m\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0p\0a\0d\0d\0i\0n\0g\0-\0r\0i\0g\0h\0t\0:\0 \0 \00\0.\02\0e\0m\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0`
#
#
# Optional replacement values below (all relate to the second problem above):
#
# Uncomment to set the amount of added padding: `1` = 0.1em, `2` = 0.2em, etc.
# 0.1em is enough for many fonts, but some (such as Georgia) need 0.2em.
#
replace_string = 00A5, `2`, `2`
replace_string = 00E9, `2`, `2`
#
# The default patch settings are suitable for horizontal languages only.
# Uncomment the following two replace_string lines for vertical languages only:
#
#replace_string = 0095, `l\0e\0f\0t\0:\0`, `t\0o\0p\0:\0 \0`
#replace_string = 00D5, `r\0i\0g\0h\0t\0:\0 \0`, `b\0o\0t\0t\0o\0m\0:\0`
#
# ... or the following two replace_string lines for both horizontal and vertical
# languages: (But note that this will cause the padding to be added at the
# beginning/end of each chapter too.)
#
#replace_string = 0093, `-\0l\0e\0f\0t\0:\0`, `:\0 \0 \0 \0 \0 \0`
#replace_string = 00AD, `!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0p\0a\0d\0d\0i\0n\0g\0-\0r\0i\0g\0h\0t\0:\0`, `\x20\0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0`
#
# Sideloaded KePubs created with old versions of the KoboTouchExtended driver,
# and perhaps some other KePubs that haven't been through Kobo's EPUB2 to KEPUB
# conversion process, might not have a wrapper div to apply the padding styles
# to. Uncomment the following line to work around the second problem for these
# KePubs too. (But beware, this can have unwanted side effects such as extra
# space between paragraphs if the above option for both horizontal and vertical
# languages is uncommented too.)
#
#replace_string = 0079, `d\0i\0v\0`, `*\0 \0 \0`
</Patch>
<Patch>
patch_name = `Force user line spacing in KePubs`
patch_enable = `no`
# Multi-version patch: 3.3.0 - 3.19.5761+
#
## This patch will allow the line spacing set by the slider to take effect
## in some problem KePub books with fixed linespacing (ones where the publisher
## has used <div> instead of <p> for pararaphs.) However it might also override
## some line spacing that would better be left fixed.
#
# body, p { line-height: %1 ... } --> body,div,p{line-height:%1 ... }
find_base_address = `b\0o\0d\0y\0,\0 \0p\0 \0{\0 \0l\0i\0n\0e\0-\0h\0e\0i\0g\0h\0t\0:\0 \0%`
replace_string = 0000, `b\0o\0d\0y\0,\0 \0p\0 \0{\0 \0l\0i\0n\0e\0-\0h\0e\0i\0g\0h\0t\0:\0 \0%`, `b\0o\0d\0y\0,\0d\0i\0v\0,\0p\0{\0l\0i\0n\0e\0-\0h\0e\0i\0g\0h\0t\0:\0%`
</Patch>
<Patch>
patch_name = `Force user line spacing in ePubs (part 1 of 2)`
patch_enable = `no`
# Multi-version patch: 3.3.0 - 3.19.5761+
#
## This is part 1 of 2. Also enable part 2 in librmsdk.so.1.0.0.patch
##
## This patch prevents any line-height style set in the book's stylesheet from
## being recognised. It will spoil the formatting of some books, but will
## ensure that the line spacing set with the adjustment slider takes effect.
#
find_base_address = `\0\0\x20\0l\0i\0n\0e\0-\0h\0e\0i\0g\0h\0t\0`
replace_string = 0004, `l`, `_`
</Patch>
<Patch>
patch_name = `ePub fixed font sharpness`
patch_enable = `no`
# Multi-version patch: 3.3.0 - 3.19.5761+
#
## This patch causes a fixed value for font sharpness to be used in epub books,
## instead of the value set by the advanced font sharpness/weight slider. The
## slider sharpness values range from -0.4(min.) to 0.2(max.), default -0.0666.
## This patch allows one of three fixed values: 0.0, 0.1, or 0.2.
#
# -kobo-font-sharpness: %1; --> -kobo-font-sharpness:0.0;
#
find_base_address = `\x10\0\0\0 \0-\0k\0o\0b\0o\0-\0f\0o\0n\0t\0-\0s\0h\0`
replace_string = 0030, `\x20\0%\01\0`, `0\0.\00\0`
#
# Replacement sharpness value: `0` = 0.0, `1` = 0.1, `2` = 0.2.
replace_string = 0034, `0`, `2`
</Patch>
<Patch>
patch_name = `KePub fixed font sharpness`
patch_enable = `no`
# Multi-version patch: 3.11.0 - 3.19.5761+
#
## This patch causes a fixed value for font sharpness to be used in kepub books,
## instead of the value set by the advanced font sharpness/weight slider. The
## slider sharpness values range from -0.4(min.) to 0.2(max.), default -0.0666.
## This patch allows one of three fixed values: 0.0, 0.1, or 0.2.
#
# body { -kobo-font-sharpness: %1; -kobo-font-thickness: %2; }\n
# --> body{-kobo-font-sharpness:0.0/*%1*/;-kobo-font-thickness:%2}\n
#
find_base_address = `b\0o\0d\0y\0 \0{\0 \0-\0k\0o\0b\0o\0-\0f\0o\0n\0t\0-\0s\0h\0`
replace_string = 0000, `b\0o\0d\0y\0 \0{\0 \0-\0k\0o\0b\0o\0-\0f\0o\0n\0t\0-\0s\0h\0a\0r\0p\0n\0e\0s\0s\0:\0 \0%\01\0;\0 \0-\0k\0o\0b\0o\0-\0f\0o\0n\0t\0-\0t\0h\0i\0c\0k\0n\0e\0s\0s\0:\0 \0%\02\0;\0 \0}\0\n\0`, `b\0o\0d\0y\0{\0-\0k\0o\0b\0o\0-\0f\0o\0n\0t\0-\0s\0h\0a\0r\0p\0n\0e\0s\0s\0:\00\0.\00\0/\0*\0%\01\0*\0/\0;\0-\0k\0o\0b\0o\0-\0f\0o\0n\0t\0-\0t\0h\0i\0c\0k\0n\0e\0s\0s\0:\0%\02\0}\0\n\0`
#
# Replacement sharpness value: `0` = 0.0, `1` = 0.1, `2` = 0.2.
#
replace_string = 0038, `0`, `2`
</Patch>
<Patch>
patch_name = `Un-force font-family override p tags (std epubs)`
patch_enable = `no`
# Multi-version patch: 3.3.0 - 3.19.5761+
#
## This patch allows the font set for paragraphs by the publisher in the epub
## stylesheet to override the font selected by the reader from the device.
#
# body, p { font-family: -ua-default !important; }
# --> body { font-family: -ua-default !important; }
#
find_base_address = `b\0o\0d\0y\0,\0 \0p\0 \0{\0 \0f\0o\0n\0t\0-\0f\0a\0m\0i\0l\0y\0:\0 \0-\0u\0a\0`
replace_string = 0000, `b\0o\0d\0y\0,\0 \0p\0`,`b\0o\0d\0y\0 \0 \0 \0`
</Patch>
<Patch>
patch_name = `Un-Force user text-align in div,p tags in KePubs`
patch_enable = `no`
# Multi-version patch: 3.3.0 - 3.19.5761+
#
## This patch allows the text alignment set by the publisher in the kepub
## stylesheet to override the alignment selected by the reader from the device.
#
# div, p { text-align: %1 !important; }
# --> body { text-align: %1 !important; }
#
find_base_address = `d\0i\0v\0,\0 \0p\0 \0{\0 \0t\0e\0x\0t\0-\0a\0l\0i\0g\0n\0:\0 \0%\01\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}`
replace_string = 0000, `d\0i\0v\0,\0 \0p`, `b\0o\0d\0y\0 \0 `
</Patch>
<Patch>
patch_name = `Always display chapter name on navigation menu`
patch_enable = `no`
#
## Normally the <-> navigation menu only displays the current chapter name if
## [Reading settings > Display progress for:] is set to 'Current Chapter'.
## This patch causes the current chapter name to be displayed if 'Entire book'
## progress is selected as well. Works for both ePub and KePub books.
#
# in ReadingMenuScrubberController::setChapterAndProgre ssText(...)
# progressTypeIsBookBased(...) --> False
replace_bytes = 8DA5C0, 3A F7 30 E5, 00 20 00 20
</Patch>
<Patch>
patch_name = `Change dicthtml strings to micthtml`
patch_enable = `no`
#
## This patch is used for something to do with syncing and custom dictionaries.
## If you don't know what it does, then you probably don't need it.
#
# `%1/dicthtml%2.zip` --> `%1/micthtml%2.zip`
#replace_string = B671B4, `%1/dicthtml%2.zip`, `%1/micthtml%2.zip`
# `%1/dicthtml%2` --> `%1/micthtml%2`
replace_string = B8B47C, `%\01\0/\0d\0i\0c\0t\0h\0t\0m\0l\0%\02\0`, `%\01\0/\0m\0i\0c\0t\0h\0t\0m\0l\0%\02\0`
# `dicthtml` --> `micthtml`
replace_string = B8B4C4, `d\0i\0c\0t\0h\0t\0m\0l\0`, `m\0i\0c\0t\0h\0t\0m\0l\0`
# `%1/dicthtml%2` --> `%1/micthtml%2`
replace_string = B8B564, `%\01\0/\0d\0i\0c\0t\0h\0t\0m\0l\0%\02\0`, `%\01\0/\0m\0i\0c\0t\0h\0t\0m\0l\0%\02\0`
# `%1/dicthtml%2` --> `%1/micthtml%2`
replace_string = B8B5C8, `%\01\0/\0d\0i\0c\0t\0h\0t\0m\0l\0%\02\0`, `%\01\0/\0m\0i\0c\0t\0h\0t\0m\0l\0%\02\0`
# `%1/dicthtml%2` --> `%1/micthtml%2`
replace_string = B8B62C, `%\01\0/\0d\0i\0c\0t\0h\0t\0m\0l\0%\02\0`, `%\01\0/\0m\0i\0c\0t\0h\0t\0m\0l\0%\02\0`
# `%1/%2/dict/dicthtml%3` --> `%1/%2/dict/micthtml%3`
replace_string = B8B690, `%\01\0/\0%\02\0/\0d\0i\0c\0t\0/\0d\0i\0c\0t\0h\0t\0m\0l\0%\03\0`, `%\01\0/\0%\02\0/\0d\0i\0c\0t\0/\0m\0i\0c\0t\0h\0t\0m\0l\0%\03\0`
# `dicthtml*` --> `micthtml*`
#replace_string = B8BE0C, `d\0i\0c\0t\0h\0t\0m\0l\0*\0`, `m\0i\0c\0t\0h\0t\0m\0l\0*\0`
# `dicthtml*` --> `micthtml*`
#replace_string = B920F4, `d\0i\0c\0t\0h\0t\0m\0l\0*\0`, `m\0i\0c\0t\0h\0t\0m\0l\0*\0`
# `dicthtml%1` --> `micthtml%1`
#replace_string = B9451C, `d\0i\0c\0t\0h\0t\0m\0l\0%\01\0`, `m\0i\0c\0t\0h\0t\0m\0l\0%\01\0`
</Patch>
<Patch>
patch_name = `Un-Force user font-family in KePubs`
patch_enable = `no`
# Multi-version patch: 3.3.0 - 3.19.5761+
#
## The KePub reader uses a very heavy-handed method of setting the font selected
## by the user, overriding all fonts set by the publisher in the book unless
## "Publisher Default" is selected.
##
## This patch lets the font-family set by the publisher in the KePub stylesheet
## to override the font-family selected by the reader from the device in some
## cases, which allows a mix of user-selected and publisher-selected fonts.
## Alternatives 1-3 give increasing preference to the publisher-selected fonts.
#
find_base_address = `*\0 \0{\0 \0f\0o\0n\0t\0-\0f\0a\0m\0i\0l\0y\0:\0 \0%\01\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0\n\0`
#
# Alternatve 1:
#
# * { font-family: %1 !important; }\n
# --> div,p{font-family:%1!important; }\n
#
replace_string = 0000, `*\0 \0{\0 \0f\0o\0n\0t\0-\0f\0a\0m\0i\0l\0y\0:\0 \0%\01\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0\n\0`, `d\0i\0v\0,\0p\0{\0f\0o\0n\0t\0-\0f\0a\0m\0i\0l\0y\0:\0%\01\0!\0i\0m\0p\0o\0r\0t\0 a\0n\0t\0;\0 \0}\0\n\0`
#
# Alternatve 2: (Similar to ePub default)
#
# * { font-family: %1 !important; }\n
# --> body,p{font-family:%1!important;}\n
#
#replace_string = 0000, `*\0 \0{\0 \0f\0o\0n\0t\0-\0f\0a\0m\0i\0l\0y\0:\0 \0%\01\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0\n\0`, `b\0o\0d\0y\0,\0p\0{\0f\0o\0n\0t\0-\0f\0a\0m\0i\0l\0y\0:\0%\01\0!\0i\0m\0p\0o\0r\0t\0 a\0n\0t\0;\0}\0\n\0`
#
# Alternative 3: (similar to ePub with `Un-force font-family override p tags`)
#
# * { font-family: %1 !important; }\n
# --> body{font-family:%1 !important; }\n
#
#replace_string = 0000, `*\0 \0{\0 \0f\0o\0n\0t\0-\0f\0a\0m\0i\0l\0y\0:\0 \0%\01\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0\n\0`, `b\0o\0d\0y\0{\0f\0o\0n\0t\0-\0f\0a\0m\0i\0l\0y\0:\0%\01\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0\n\0`
</Patch>
<Patch>
patch_name = `KePub full justification default`
patch_enable = `no`
# Multi-version patch: 3.16.0 - 3.19.5761+
#
## This patch makes full justification the default for KePub books by adding the
## following to the built-in KePub stylesheet:
##
## body{text-align:justify}
##
## This only sets the default, if the publisher has set the justification in the
## book's stylesheet then it will override the default, and so you might still
## need to use the justify button on the Aa menu to set full justification.
##
## The advantage of this patch is that using the justify button (which also
## forces some things such as headings to be fully justified instead of
## centred), can be avoided for some books.
#
find_base_address = `.\0K\0B\0H\0i\0g\0h\0l\0i\0g\0h\0t\0i\0n\0g\0,\0 \0.\0K\0B\0S\0e\0a\0r\0c\0h\0R\0e\0s\0u\0l\0t\0 \0{\0 \0b\0a\0c\0k\0g\0r\0o\0u\0n\0d\0-\0c\0o\0l\0o\0r\0:\0 \0#\0C\06\0C\06\0C\06\0`
#
replace_string = 0000, `.\0K\0B\0H\0i\0g\0h\0l\0i\0g\0h\0t\0i\0n\0g\0,\0 \0.\0K\0B\0S\0e\0a\0r\0c\0h\0R\0e\0s\0u\0l\0t\0 \0{\0 \0b\0a\0c\0k\0g\0r\0o\0u\0n\0d\0-\0c\0o\0l\0o\0r\0:\0 \0#\0C\06\0C\06\0C\06\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0\t\0`, `.\0K\0B\0H\0i\0g\0h\0l\0i\0g\0h\0t\0i\0n\0g\0,\0. \0K\0B\0S\0e\0a\0r\0c\0h\0R\0e\0s\0u\0l\0t\0{\0b\0 a\0c\0k\0g\0r\0o\0u\0n\0d\0-\0c\0o\0l\0o\0r\0:\0#\0C\06\0C\06\0C\06\0!\0i\0m\0 p\0o\0r\0t\0a\0n\0t\0}\0.\0K\0B\0S\0t\0a\0c\0k\0K\ 0`
#
replace_string = 0098, `.\0K\0B\0S\0t\0a\0c\0k\0K\0e\0y\0w\0o\0r\0d\0,\0 \0.\0K\0B\0S\0e\0a\0r\0c\0h\0R\0e\0s\0u\0l\0t\0,\0 \0.\0K\0B\0A\0n\0n\0o\0t\0a\0t\0i\0o\0n\0,\0 \0.\0K\0B\0H\0i\0g\0h\0l\0i\0g\0h\0t\0i\0n\0g\0 \0,\0 \0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0 o\0n\0{\0 \0f\0o\0n\0t\0-\0s\0i\0z\0e\0:\0 \01\00\00\0%\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0-\0w\0e\0b\0k\0i\0t\0-\0t\0e\0x\0t\0-\0c\0o\0m\0b\0i\0n\0e\0:\0 \0i\0n\0h\0e\0r\0i\0t\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0\t\0`, `e\0y\0w\0o\0r\0d\0,\0.\0K\0B\0S\0e\0a\0r\0c\0h\0R \0e\0s\0u\0l\0t\0,\0.\0K\0B\0A\0n\0n\0o\0t\0a\0t\0 i\0o\0n\0,\0.\0K\0B\0H\0i\0g\0h\0l\0i\0g\0h\0t\0i\ 0n\0g\0,\0 \0K\0B\0A\0u\0t\0h\0o\0r\0A\0n\0n\0o\0t\0a\0t\0i\0 o\0n\0{\0f\0o\0n\0t\0-\0s\0i\0z\0e\0:\01\00\00\0%\0!\0i\0m\0p\0o\0r\0t\0 a\0n\0t\0;\0-\0w\0e\0b\0k\0i\0t\0-\0t\0e\0x\0t\0-\0c\0o\0m\0b\0i\0n\0e\0:\0i\0n\0h\0e\0r\0i\0t\0!\0 i\0m\0p\0o\0r\0t\0a\0n\0t\0}\0.\0K\0B\0S\0t\0a\0c\ 0k\0K\0e\0y\0w\0o\0r\0d\0 \0a\0{\0c\0o\0l\0o\0r\0`
#
replace_string = 1D8, `.\0K\0B\0S\0t\0a\0c\0k\0K\0e\0y\0w\0o\0r\0d\0 \0a\0 \0{\0 \0c\0o\0l\0o\0r\0:\0 \0b\0l\0a\0c\0k\0 \0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0;\0 \0}\0 \0\t\0`, `:\0b\0l\0a\0c\0k\0!\0i\0m\0p\0o\0r\0t\0a\0n\0t\0} \0b\0o\0d\0y\0{\0t\0e\0x\0t\0-\0a\0l\0i\0g\0n\0:\0j\0u\0s\0t\0i\0f\0y\0}\0 \0 \0 \0 \0 \0 \0 \0`
#
# Fix typo in annotations styles: KBAuthorAnnotation --> .KBAuthorAnnotation
replace_string = 0102, `\x20`, `.`
</Patch>
05-14-2016, 06:41 AM
I've modified the patch for that FW and removing that. Very nice addition 
. I copied the code over but I can't get the bat file to generate a new target zip. When I double click (using windows 7) it appears to flash but it goes away immediately. 
Similar Threads