If you could change some things on the 505, what would it be? - Page 7

astra · 11-13-2008, 02:12 PM

No visible backlight. But how does it work then if it does not have a light?

pilotbob · 11-13-2008, 02:38 PM

Quote:

Originally Posted by astra

No visible backlight. But how does it work then if it does not have a light?

What do you mean? The LCD screen polarizes a portion of the screen so that the diode becomes opaque. From Wikipedia:

Quote:

When a voltage is applied across the electrodes, a torque acts to align the liquid crystal molecules parallel to the electric field, distorting the helical structure (this is resisted by elastic forces since the molecules are constrained at the surfaces). This reduces the rotation of the polarization of the incident light, and the device appears grey. If the applied voltage is large enough, the liquid crystal molecules in the center of the layer are almost completely untwisted and the polarization of the incident light is not rotated as it passes through the liquid crystal layer. This light will then be mainly polarized perpendicular to the second filter, and thus be blocked and the pixel will appear black.

The LCD itself does not provide the light in any way. Perhaps you are confusing it with an LED which causes the diode to glow. The light of the Jetbook screen that allows you to see the crystals as black or not comes from ambient light reflected of the screen. This is in contrast to an LCD monitor for example which has a layer under the TFT substrate which glows.

An eInk works similar but the method to make the pixes opaque or transparent is done differently and also it doesn't require continous power to maintain that state as does an LCD.

BOb

astra · 11-13-2008, 02:46 PM

I thought it needs some sort of light to make things visible on TFT screen and also that there is some sort of constant current, albeit speedy one, that makes the text to flicker, which might not noticeable by human eye but strains it nonetheless.

Kris777 · 11-14-2008, 01:31 AM

Quote:

Originally Posted by astra

Then what is a difference between eInk and TFT?

I believe my ectaco dictionaries have the same TFT screen as the ebook reader

No, I have ectaco dictionaries too. They don't have TFT screens like jetBook has. jetBook is only one ectaco product that comes with reflective TFT screen (it has no backlighting). I spend 5-6 hours for reading in airplane and have no any problems for eyes.

astra · 11-14-2008, 06:20 AM

OK. I give up. Maybe I don't understand something. I am quite sure that my ectaco dictionaries didn't have backlight, at least in a conventional sense.

RJ_Cruze_Jr · 11-14-2008, 12:07 PM

Quote:

Originally Posted by gwynevans

Interesting choice, as all the current downloads from Baen seem have it as "Tomanak", i.e. no accent! (Page 3 does have "hrä-dä-ne", which reads correctly here, but I'm not sure if I've currently got the standard fonts or extended ones installed.)

So, it might be worth the effort to try that tutorial for replacing the default fonts then?

BruceB · 11-14-2008, 02:13 PM

A couple of things I'd change...
- I'd like the option to have the software treat the built in memory and the SDcard(s) as a single storage device. I don't want to have to "worry" about whether or not the book is internal or on a card (I know some of you do, but I don't, hence the request that the feature be optional).

- One of the features the iPod/iTunes software has is the ability to let it manage the storage location on the PC. If I ask it to "consolidate" the library (I think that's the term apple uses), it will copy the file to a location it controls on the disk and use that copy for all further actions. That way I don't have to think about it. It would be really nice if the sony software did the same thing. Again, I'd be happy if that was an optional feature, as it is in iTunes.

Kris777 · 11-15-2008, 01:00 AM

Quote:

Originally Posted by astra

OK. I give up. Maybe I don't understand something. I am quite sure that my ectaco dictionaries didn't have backlight, at least in a conventional sense.

More information about jetBook screen available here:
https://www.mobileread.com/forums/sho...ighlight=m218a

..
Compared to the usual E Ink display, the new panel has a higher contrast ratio (12:1 vs. 8:1) and also relatively low power consumption (20 mW vs. 1mW (E Ink standby) and 750 mW (E Ink active update)). Screen refresh is a lot faster (20 ms vs. 0.5-1s).
...

gwynevans · 11-17-2008, 09:19 AM

Quote:

Originally Posted by RJ_Cruze_Jr

So, it might be worth the effort to try that tutorial for replacing the default fonts then?

Even easier than that, as any 'new' fonts I'm using would have been provided by the PRSCustomizer process. I didn't select any specific localization options, but I think it still provides more fully-populated fonts that the default firmware provides (as I understand it, the defaults stop at 7-bit whereas these have more of the 8-bit chars available).

radius · 11-17-2008, 04:18 PM

Quote:

Originally Posted by BruceB

- One of the features the iPod/iTunes software has is the ability to let it manage the storage location on the PC. If I ask it to "consolidate" the library (I think that's the term apple uses), it will copy the file to a location it controls on the disk and use that copy for all further actions. That way I don't have to think about it. It would be really nice if the sony software did the same thing. Again, I'd be happy if that was an optional feature, as it is in iTunes.

This is the way Calibre works, so you might consider switching to use that instead of the Sony eBook Library (though you would lose the pre-pagination that Sony does for you).

ProDigit · 11-22-2008, 12:14 PM

I'd want a little clock in the right bottom of the page.
If there's a possibility to put a date too, that would be even better!

ChipnDale · 11-23-2008, 12:03 AM

Remove the mp3 option, not so delicate screen (after reading a few posts on here I'm super scared), and make a way to choose how the books are displayed on the reader (ie: title, author ect) because I have some books that are annoying everytime I see the title not displaying the way I want it to and they are PDF so I can't simply edit them

11-14-2008, 02:13 PM	#97
BruceB Member Posts: 18 Karma: 10 Join Date: Jan 2008 Device: PRS505	I'd like to see... A couple of things I'd change... - I'd like the option to have the software treat the built in memory and the SDcard(s) as a single storage device. I don't want to have to "worry" about whether or not the book is internal or on a card (I know some of you do, but I don't, hence the request that the feature be optional). - One of the features the iPod/iTunes software has is the ability to let it manage the storage location on the PC. If I ask it to "consolidate" the library (I think that's the term apple uses), it will copy the file to a location it controls on the disk and use that copy for all further actions. That way I don't have to think about it. It would be really nice if the sony software did the same thing. Again, I'd be happy if that was an optional feature, as it is in iTunes.

11-23-2008, 12:03 AM	#102
ChipnDale Rescue Rangers Posts: 109 Karma: 2144082 Join Date: Nov 2008 Location: Visitor from another planet Device: IPad	Remove the mp3 option, not so delicate screen (after reading a few posts on here I'm super scared), and make a way to choose how the books are displayed on the reader (ie: title, author ect) because I have some books that are annoying everytime I see the title not displaying the way I want it to and they are PDF so I can't simply edit them Other than that I love my reader!

11-24-2008, 02:31 PM	#104
ChipnDale Rescue Rangers Posts: 109 Karma: 2144082 Join Date: Nov 2008 Location: Visitor from another planet Device: IPad	Ooohhh Thanks!

11-24-2008, 08:30 PM	#105
ashort Connoisseur Posts: 70 Karma: 1997310 Join Date: Jul 2008 Location: USA Device: PaperWhite 10th Gen	A black PRS-505 with a black cover.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRS 505 Battery Change	two wheels	Sony Reader	3	02-08-2010 05:48 AM
Battery change PRS-505 UK	astra	Sony Reader	11	11-20-2009 05:32 AM
Button-Change on the 505	bookbinder	Sony Reader Dev Corner	3	03-28-2008 09:28 AM
confound this new-fangled technology ! (or : the more things change...)	zelda_pinwheel	Lounge	2	02-21-2008 09:06 PM
Ok, now the best things about the 505	Rocketime	Sony Reader	22	10-14-2007 11:41 PM

11-13-2008, 02:12 PM	#91
astra The Introvert Posts: 8,307 Karma: 1000077497 Join Date: Jan 2007 Location: United Kingdom Device: Sony Reader PRS-650 & 505 & 500	No visible backlight. But how does it work then if it does not have a light?

11-13-2008, 02:46 PM	#93
astra The Introvert Posts: 8,307 Karma: 1000077497 Join Date: Jan 2007 Location: United Kingdom Device: Sony Reader PRS-650 & 505 & 500	I thought it needs some sort of light to make things visible on TFT screen and also that there is some sort of constant current, albeit speedy one, that makes the text to flicker, which might not noticeable by human eye but strains it nonetheless.

11-14-2008, 06:20 AM	#95
astra The Introvert Posts: 8,307 Karma: 1000077497 Join Date: Jan 2007 Location: United Kingdom Device: Sony Reader PRS-650 & 505 & 500	OK. I give up. Maybe I don't understand something. I am quite sure that my ectaco dictionaries didn't have backlight, at least in a conventional sense.

11-22-2008, 12:14 PM	#101
ProDigit Karmaniac Posts: 2,553 Karma: 11499146 Join Date: Oct 2008 Location: Miami FL Device: PRS-505, Jetbook, + Mini, +Color, Astak Ez Reader Pro, PPW1, Aura H2O	I'd want a little clock in the right bottom of the page. If there's a possibility to put a date too, that would be even better!