Calibre & Bookeen...

carpetmojo · 12-27-2011, 03:29 AM

Help please....( Not sure if this should be Calibre or Bookeen - but I'll ask Mod's help if misplaced ! )

I've plugged my wife's new Bookeen Opus into PC, hit Calibre - but no "send to device" button....
I had this on my T1 , but can't find/remember the solution.
The Opus is not ADE'd, I just banged it onto the family Calibre, which I thought was OK.

Only possible difference is both USB cables I've tried are through a hub, not direct into PC - hoped to avoid fiddling around. The feeds I have direct from PC, wouldn't you know it, all have the wrong size plug for the Bookeen....

Do I need to fiddle things around after all ?

Having just re-peeked on the Bookeen section, should I authotise it to my existing ADE or create a new one ? Is that the problem, basically - no ADE ?

carpetmojo · 12-27-2011, 05:25 AM

Well, I've tried it with my Sansa feed direct from the PC rear, but still no signs of "Send to device" button....
I thought I didn't need to do anything to get it recognised - it's plainly something so ... simple - but that's me and techiness, sadly.
I do try... Help !

Finally tried with supplied USB cable - zilch.
Not even showing up as connected hardware on My Computer.
Battery is 100% charged.

opitzs · 12-27-2011, 05:40 AM

Does your device have some kind of indicator, if it is connected? Does Windows (not calibre) show any sign of recognizing your device?
Right now the possibilities are endless, broken cable, defect usb port, Windows, for what I know, it may be a virus scanner that thinks this device is dangerous...

DoctorOhh · 12-27-2011, 05:40 AM

Quote:

Originally Posted by carpetmojo

Not even showing up as connected hardware on My Computer.

I was going to tell you to go to Preferences - Miscellaneous and run the Debug device detection and copy the results here, but if you don't even see it as a USB drive under My Computer then there is nothing calibre can do.

You have to solve the no drive letter assigned problem first. When the device is connected right click on My Computer (or Computer) and go to Manage then look under Disk Management and see if it is shown as a drive there.

Good Luck.

carpetmojo · 12-27-2011, 06:13 AM

Thanks all - here we go..
Yes, the Opus is showing red light = power there.
The port was OK with previous device.
Went to My Comp only showing Floppy, DVD Ram Drive and removeable disk E .Went to Disk management etc.. and properties show this as ST380021A.
But nothing happens when I switch Opus on or off....
Dont have my back-up disk connected.

DoctorOhh · 12-27-2011, 06:34 AM

Quote:

Originally Posted by carpetmojo

removeable disk E .Went to Disk management etc.. and properties show this as ST380021A.

How much space does it show for Removable drive E? Mine shows 1.46GB which is correct. Have you rebooted your computer? Just for fun you might try right clicking on drive E: and changing the drive letter to some other out of the way letter like M:

Let us know if you see any progress.

mbovenka · 12-27-2011, 07:23 AM

Quote:

Originally Posted by carpetmojo

Went to My Comp only showing Floppy, DVD Ram Drive and removeable disk E .Went to Disk management etc.. and properties show this as ST380021A.
But nothing happens when I switch Opus on or off....
Dont have my back-up disk connected.

That's very odd, because 'ST380021A' sure sounds like a Seagate disk model. And it is.

So it sounds like your PC is confused... Perhaps connecting your backup disk (which, I presume, would then show up the E: drive) and changing the drive letter to something else will help?

carpetmojo · 12-27-2011, 07:37 AM

mbovenka - you may be on to something !

Because having gotten fed up & unplugged, I then felt braver, plugged in again, opened Calibnre again - to see a blank Library...worrying, however, I then realised it was showing s"send to Device" (still nothing showing on My Computer).
So I knocked out and reopened Calibre a couple of times - and Library re-appeared books and all !

I tried to send one title to "the Device" - the Opus remember - and it told me I already had it on device, install anyway ? Said yes, and there it was on the Opus.
Plugged in T1, all well there.

Have since sent 4 titles from my Calibre Library, and just now downloaded a new title from Gutengberg OK, and it's gone to the Opus OK.

Which is now showing on My Computer.

So I was definitely confused - and I think the PC was as well !

12-27-2011, 03:29 AM	#1
carpetmojo Wizard Posts: 3,117 Karma: 9269999 Join Date: Feb 2011 Location: UK Device: Sony- T3, PRS650, 350, T1/2/3, Paperwhite, Fire 8.9,Samsung Tab S 10.5	Calibre & Bookeen... Help please....( Not sure if this should be Calibre or Bookeen - but I'll ask Mod's help if misplaced ! ) I've plugged my wife's new Bookeen Opus into PC, hit Calibre - but no "send to device" button.... I had this on my T1 , but can't find/remember the solution. The Opus is not ADE'd, I just banged it onto the family Calibre, which I thought was OK. Only possible difference is both USB cables I've tried are through a hub, not direct into PC - hoped to avoid fiddling around. The feeds I have direct from PC, wouldn't you know it, all have the wrong size plug for the Bookeen.... Do I need to fiddle things around after all ? Having just re-peeked on the Bookeen section, should I authotise it to my existing ADE or create a new one ? Is that the problem, basically - no ADE ? Last edited by carpetmojo; 12-27-2011 at 03:33 AM.

12-27-2011, 05:25 AM	#2
carpetmojo Wizard Posts: 3,117 Karma: 9269999 Join Date: Feb 2011 Location: UK Device: Sony- T3, PRS650, 350, T1/2/3, Paperwhite, Fire 8.9,Samsung Tab S 10.5	Well, I've tried it with my Sansa feed direct from the PC rear, but still no signs of "Send to device" button.... I thought I didn't need to do anything to get it recognised - it's plainly something so ... simple - but that's me and techiness, sadly. I do try... Help ! Finally tried with supplied USB cable - zilch. Not even showing up as connected hardware on My Computer. Battery is 100% charged. Last edited by carpetmojo; 12-27-2011 at 05:34 AM.

12-27-2011, 07:37 AM	#8
carpetmojo Wizard Posts: 3,117 Karma: 9269999 Join Date: Feb 2011 Location: UK Device: Sony- T3, PRS650, 350, T1/2/3, Paperwhite, Fire 8.9,Samsung Tab S 10.5	Mysteriouser and mysteriouser... mbovenka - you may be on to something ! Because having gotten fed up & unplugged, I then felt braver, plugged in again, opened Calibnre again - to see a blank Library...worrying, however, I then realised it was showing s"send to Device" (still nothing showing on My Computer). So I knocked out and reopened Calibre a couple of times - and Library re-appeared books and all ! I tried to send one title to "the Device" - the Opus remember - and it told me I already had it on device, install anyway ? Said yes, and there it was on the Opus. Plugged in T1, all well there. Have since sent 4 titles from my Calibre Library, and just now downloaded a new title from Gutengberg OK, and it's gone to the Opus OK. Which is now showing on My Computer. So I was definitely confused - and I think the PC was as well ! Last edited by carpetmojo; 12-27-2011 at 01:37 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Calibre Bookeen Orizon	harriej	Calibre	1	12-11-2010 11:36 AM
Use Calibre to read Amazon books on a Bookeen Cybook Opus?	sharedwindow	Calibre	7	02-03-2010 04:45 PM
Calibre 0.6.7 and pdf ebook import on µSD card (Bookeen Opus)	ericch	Calibre	2	08-19-2009 03:21 PM
Calibre 0.6.5 and Bookeen Opus - Very slow data reading	ericch	Calibre	6	08-19-2009 01:47 PM
PRS Fonts, PDF gray && Calibre	Hranostak	Sony Reader	1	11-22-2008 02:50 PM

12-27-2011, 05:40 AM	#3
opitzs Avid Reader Posts: 161 Karma: 36472 Join Date: Sep 2008 Location: Look for rain, hail and snow... Device: PRS-505, PRS-600, PRS T1, Kobo Glo	Does your device have some kind of indicator, if it is connected? Does Windows (not calibre) show any sign of recognizing your device? Right now the possibilities are endless, broken cable, defect usb port, Windows, for what I know, it may be a virus scanner that thinks this device is dangerous...

12-27-2011, 06:13 AM	#5
carpetmojo Wizard Posts: 3,117 Karma: 9269999 Join Date: Feb 2011 Location: UK Device: Sony- T3, PRS650, 350, T1/2/3, Paperwhite, Fire 8.9,Samsung Tab S 10.5	Thanks all - here we go.. Yes, the Opus is showing red light = power there. The port was OK with previous device. Went to My Comp only showing Floppy, DVD Ram Drive and removeable disk E .Went to Disk management etc.. and properties show this as ST380021A. But nothing happens when I switch Opus on or off.... Dont have my back-up disk connected.