PRS-650 Cases - Page 11

Jar Jar Binks · 01-08-2011, 12:56 AM

library addict
That is absolutely beautiful.
Jar Jar Binks

Jar Jar Binks · 01-08-2011, 01:00 AM

library addict
I cannot seem to find the site would you post or post on my profile page the WEbsite please.
Jar Jar

library addict · 01-08-2011, 02:59 AM

Quote:

Originally Posted by Jar Jar Binks

library addict
I cannot seem to find the site would you post or post on my profile page the WEbsite please.
Jar Jar

Their website is http://www.oberondesign.com/

Or just email them at sales@oberondesign.com

From the notation on their homepage, it looks like they are on vacation until Monday.

Iridal · 01-08-2011, 03:03 AM

Quote:

Originally Posted by library addict

From the notation on their homepage, it looks like they are on vacation until Monday.

They're still answering emails !

I think I read somewhere that you ordered the case by email. They told me to call them to place the order, but since I'm in Europe that will cost me a lot of money. How did you place your order ?

library addict · 01-08-2011, 09:17 AM

I think I called them to place the actual order as I had some questions.

I know they sent me a few emails, because when I first emailed them to inquire I was told they no longer made Sony cases, but would reconsider if there was enough demand. Then later they emailed me to say they could still the 600 style cases from the same style/color combinations available from the Kindle 3. But that I couldn't place an order via the website because the choice doesn't exist on their website any longer.

rumplestiltskin · 01-09-2011, 08:17 PM

I was ready to buy the Navitech PRS650 case on Amazon but the only review said the case was really for the 600.

My wife and I were doing our evening walk over at the mall (a bit too cold last night for an outdoor sojourn) and I told her that I was considering making my own case (I have an industrial sewing machine). She was insistent that I not waste my time and that we should search through the stores at the Mall where we would be sure to find something that would do the job. I had my doubts...

Imagine my surprise when I found a CaseLogic zippered case for a 'Sony Reader Touch' at Sears(!) but...which one? 600 or 650? I knew that they are similar in size so I bought it and took it home. Turns out it's for the 600 but with a bit of extra elastic and a piece of foam it should do nicely. I wanted a case which would let me read without removing the 650. It's not leather (which I wanted) but for $20, how can I complain?

Jar Jar Binks · 01-14-2011, 09:31 PM

Thank You Very Much library addict!

Iridal · 01-15-2011, 02:36 AM

Quote:

Originally Posted by library addict

I think I called them to place the actual order as I had some questions.

I know they sent me a few emails, because when I first emailed them to inquire I was told they no longer made Sony cases, but would reconsider if there was enough demand. Then later they emailed me to say they could still the 600 style cases from the same style/color combinations available from the Kindle 3. But that I couldn't place an order via the website because the choice doesn't exist on their website any longer.

Just wanted to let you guys know ordering by email is absolutely no problem for them. I've been pestering them with emails, and Amy has been really helpul and patient with me !

In a couple of weeks I'll have my gorgeous sky dragon case

JSWolf · 01-26-2011, 09:32 AM

Quote:

Originally Posted by Iridal

Just wanted to let you guys know ordering by email is absolutely no problem for them. I've been pestering them with emails, and Amy has been really helpul and patient with me !

In a couple of weeks I'll have my gorgeous sky dragon case

I hope you'll post photos so we can have a look.

shannon12g · 01-30-2011, 04:04 AM

I haven't seen anyone mention it here, but has anyone tried putting a silicone cover on a 650 and using it with a 600 case?

I'm thinking about trying this with either an Oberon 600 case or even an M-Edge Go Jacket...thought the silicone might help the fit. Thoughts?

library addict · 01-30-2011, 09:35 PM

Quote:

Originally Posted by shannon12g

I haven't seen anyone mention it here, but has anyone tried putting a silicone cover on a 650 and using it with a 600 case?

I'm thinking about trying this with either an Oberon 600 case or even an M-Edge Go Jacket...thought the silicone might help the fit. Thoughts?

I have the Oberon 600 case and the 650 fits perfectly. The hold is tight. So, if you do go with an Oberon case, the extra silicone cover would be an unnecessary expense IMO.

Unless you have already used the case with a 600 and the straps are "stretched" so-to-speak. Then I could see possibly needing help with the fit.

mcrmama · 01-31-2011, 12:13 AM

I have ordered a Noreve case and have skinned my 650. I am being so careful these days while i wait for my case. I thought if I was spending the money I would get the colour I want. I will update when it arrives.

elizilla · 01-31-2011, 09:41 AM

Based on other discussion here, I ordered the Oberon Designs small journal cover back at the end of December, while they were on vacation. It arrived last week.

I took the blank book out of it and it is indeed the perfect size for my PRS650. The blank book was about twice the thickness of the reader, so after I took it out I put the case under weights overnight, empty, to squash it flat to match the reader.

I used two strips of industrial strength adhesive velcro to stick the reader into the cover. My PRS650 is skinned and the velcro sticks very well to the skin and to the leather of the cover.

I then glued two small steel washers in the corners of the inside front cover with some adhesive sealant. They stick very well too. And when the cover is closed, they hold the corners in place against the magnetic corners of the reader. They wouldn't be enough to hold it shut alone, but the cover also has a strap.

The cover is very beautiful. I'd post pictures but the Oberon site has better pictures than I could ever take.

Iridal · 02-03-2011, 10:58 AM

Quote:

Originally Posted by JSWolf

I hope you'll post photos so we can have a look.

Here you go

The first picture shows the colour the best. The other 2 I took after dark, under a lamp.

library addict · 02-03-2011, 04:03 PM

Very pretty.

I looked at the dragon one before ultimately going with the celtic hounds.

01-31-2011, 09:41 AM	#163
elizilla Addict Posts: 271 Karma: 610286 Join Date: Nov 2010 Location: Michigan, USA Device: Kobo Elipsa, Kindle Paperwhite, Kobo Sage, others	Based on other discussion here, I ordered the Oberon Designs small journal cover back at the end of December, while they were on vacation. It arrived last week. I took the blank book out of it and it is indeed the perfect size for my PRS650. The blank book was about twice the thickness of the reader, so after I took it out I put the case under weights overnight, empty, to squash it flat to match the reader. I used two strips of industrial strength adhesive velcro to stick the reader into the cover. My PRS650 is skinned and the velcro sticks very well to the skin and to the leather of the cover. I then glued two small steel washers in the corners of the inside front cover with some adhesive sealant. They stick very well too. And when the cover is closed, they hold the corners in place against the magnetic corners of the reader. They wouldn't be enough to hold it shut alone, but the cover also has a strap. The cover is very beautiful. I'd post pictures but the Oberon site has better pictures than I could ever take. Last edited by elizilla; 01-31-2011 at 09:46 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Accessories New Cases for the Kindle	Nate the great	Amazon Kindle	39	08-11-2010 10:52 PM
Accessories cases?	nimblem	Amazon Kindle	0	08-06-2010 01:41 PM
Skins and cases in the UK	momentblur	General Discussions	5	08-02-2010 07:52 AM
Are there any non-Sony cases available?	ddavtian	Sony Reader	3	01-30-2009 01:42 AM
Cases	splat	iRex	9	01-29-2007 03:02 AM

01-08-2011, 12:56 AM	#151
Jar Jar Binks Enthusiast Posts: 46 Karma: 10 Join Date: Nov 2010 Location: Lindsay,Ontario Canada Device: PRS650 And PRS 350 Yay I got it !!! I got it !!! I'm in love.	library addict That is absolutely beautiful. Jar Jar Binks

01-08-2011, 01:00 AM	#152
Jar Jar Binks Enthusiast Posts: 46 Karma: 10 Join Date: Nov 2010 Location: Lindsay,Ontario Canada Device: PRS650 And PRS 350 Yay I got it !!! I got it !!! I'm in love.	library addict I cannot seem to find the site would you post or post on my profile page the WEbsite please. Jar Jar

01-08-2011, 09:17 AM	#155
library addict Grand Sorcerer Posts: 13,119 Karma: 37197878 Join Date: Nov 2010 Location: USA Device: Nexus 7 2, Samsung Galaxy Tab A 8" (retired=Sony PRS650, Kobo Mini)	I think I called them to place the actual order as I had some questions. I know they sent me a few emails, because when I first emailed them to inquire I was told they no longer made Sony cases, but would reconsider if there was enough demand. Then later they emailed me to say they could still the 600 style cases from the same style/color combinations available from the Kindle 3. But that I couldn't place an order via the website because the choice doesn't exist on their website any longer.

01-09-2011, 08:17 PM	#156
rumplestiltskin Zealot Posts: 105 Karma: 1435120 Join Date: Nov 2010 Location: West of the Pecos Device: FireHD8, iPad	I was ready to buy the Navitech PRS650 case on Amazon but the only review said the case was really for the 600. My wife and I were doing our evening walk over at the mall (a bit too cold last night for an outdoor sojourn) and I told her that I was considering making my own case (I have an industrial sewing machine). She was insistent that I not waste my time and that we should search through the stores at the Mall where we would be sure to find something that would do the job. I had my doubts... Imagine my surprise when I found a CaseLogic zippered case for a 'Sony Reader Touch' at Sears(!) but...which one? 600 or 650? I knew that they are similar in size so I bought it and took it home. Turns out it's for the 600 but with a bit of extra elastic and a piece of foam it should do nicely. I wanted a case which would let me read without removing the 650. It's not leather (which I wanted) but for $20, how can I complain?

01-14-2011, 09:31 PM	#157
Jar Jar Binks Enthusiast Posts: 46 Karma: 10 Join Date: Nov 2010 Location: Lindsay,Ontario Canada Device: PRS650 And PRS 350 Yay I got it !!! I got it !!! I'm in love.	Thank You Very Much library addict!

01-30-2011, 04:04 AM	#160
shannon12g Sony PRS-650 Posts: 1 Karma: 10 Join Date: Jan 2011 Device: Sony PRS-650	I haven't seen anyone mention it here, but has anyone tried putting a silicone cover on a 650 and using it with a 600 case? I'm thinking about trying this with either an Oberon 600 case or even an M-Edge Go Jacket...thought the silicone might help the fit. Thoughts?

01-31-2011, 12:13 AM	#162
mcrmama Addict Posts: 239 Karma: 16806 Join Date: Jul 2010 Device: Kobo Aura One	I have ordered a Noreve case and have skinned my 650. I am being so careful these days while i wait for my case. I thought if I was spending the money I would get the colour I want. I will update when it arrives.

02-03-2011, 04:03 PM	#165
library addict Grand Sorcerer Posts: 13,119 Karma: 37197878 Join Date: Nov 2010 Location: USA Device: Nexus 7 2, Samsung Galaxy Tab A 8" (retired=Sony PRS650, Kobo Mini)	Very pretty. I looked at the dragon one before ultimately going with the celtic hounds.