Calibre with an unpatched PRS 505

aragon127 · 08-27-2010, 02:47 PM

Does Calibre no longer work with the unpatched PRS-505's? I had it working fine under Ubuntu 9.04 with an old copy, but when I reinstalled linux I grabbed a new copy of Calibre. The USB device shows up as being recognized by linux, but Calibre won't recognize it.

So I jumped to windows computer and loaded the windows version of Calibre. Windows recognized the Sony, and loaded the drivers successfully. But again, Calibre doesn't see it.

Is there something else going on, or does Calibre just not recognize the unpatched versions (e.g., the original firmware)?

kovidgoyal · 08-27-2010, 03:11 PM

Does the device show up as a disk?

DoctorOhh · 08-27-2010, 07:49 PM

Quote:

Originally Posted by aragon127

Is there something else going on, or does Calibre just not recognize the unpatched versions (e.g., the original firmware)?

What "Original Firmware" are you talking about? If your 505 can read ePubs then it has been patched beyond the "Original firmware".

Hook your 505 up then go to Preferences - Advanced - Debug device detection. Copy the output here.

aragon127 · 08-30-2010, 07:26 AM

Quote:

Originally Posted by kovidgoyal

Does the device show up as a disk?

I don't believe so, at least on the linux box, as it doesn't show up in my /media folder or as a disk in nautilus.

Is there another way to tell?

kovidgoyal · 08-30-2010, 09:46 AM

Look for the /dev/sd* nodes being created when the device is plugged in or look at the dmesg output when the device is plugged in

08-27-2010, 02:47 PM	#1
aragon127 Junior Member Posts: 9 Karma: 10 Join Date: Sep 2007 Device: Sony Reader	Calibre with an unpatched PRS 505 Does Calibre no longer work with the unpatched PRS-505's? I had it working fine under Ubuntu 9.04 with an old copy, but when I reinstalled linux I grabbed a new copy of Calibre. The USB device shows up as being recognized by linux, but Calibre won't recognize it. So I jumped to windows computer and loaded the windows version of Calibre. Windows recognized the Sony, and loaded the drivers successfully. But again, Calibre doesn't see it. Is there something else going on, or does Calibre just not recognize the unpatched versions (e.g., the original firmware)?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
calibre with prs 505	querty	Calibre	3	11-03-2009 04:38 PM
Calibre for PRS 505	Bowhuntxx78	Sony Reader	9	06-29-2009 06:47 PM
Calibre only detects one of two memory cards (PRS-505 and PRS-700)	Momo_Germany	Calibre	2	05-25-2009 01:25 AM
Calibre and PRS 505 on Mac?	timothy	Calibre	4	04-15-2009 10:19 AM
Preprocessing to PRS-505 from Calibre	jeff363	Calibre	7	06-02-2008 07:20 AM

08-27-2010, 03:11 PM	#2
kovidgoyal creator of calibre Posts: 45,345 Karma: 27182818 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Does the device show up as a disk?

08-30-2010, 09:46 AM	#5
kovidgoyal creator of calibre Posts: 45,345 Karma: 27182818 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Look for the /dev/sd* nodes being created when the device is plugged in or look at the dmesg output when the device is plugged in

Advert

Advert