"Dead" iLiad

BlackRat · 01-13-2007, 08:18 AM

Hi.
I have "dead" iLiad. When I try to switch it on I can see only green led. No images...

How can I access to the file system. Do I need special cable and/or software?
The iRex techsupport price is very high (350Euro).

vranghel · 01-13-2007, 03:09 PM

Is the led on solid, or blinking? Did u try to plug it in to recharge? Did u connect it to the computer to see if u can see the internals?

Mike Kostousov · 01-14-2007, 04:39 AM

Quote:

Originally Posted by BlackRat

Hi.
I have "dead" iLiad. When I try to switch it on I can see only green led. No images...

How can I access to the file system. Do I need special cable and/or software?
The iRex techsupport price is very high (350Euro).

How did you get that? I have same problem... But I have access to internal storage via usb.

BlackRat · 01-16-2007, 02:19 AM

Now I can see green led only when I press "ON". At the same time my computer shows me "Unknown USB device". It immediatly goes off when I release switch.

BlackRat · 01-16-2007, 02:20 AM

The led is solid.

pdam · 01-16-2007, 04:35 AM

Silly question - have you reset the device with the recessed switch on the back? Also is the device charged?
Have you installed anything on the device other than content? Another silly question - I assume you haven't damaged the device - was there an event after which it stopped working?

BlackRat · 01-16-2007, 05:44 AM

Reset... Many times. Device is charged. There was only iLiad software on the device and few docs. I didn't damage device (650Euro - it's expensive to me).

BlackRat · 01-16-2007, 09:11 AM

When I press ЭЩТЭ for a long tome (10 sec) my computer shows me "Unknown USB device". May be I need special drivers for it (to access files)?

BlackRat · 01-16-2007, 09:12 AM

When I press "ON"...

bojan · 01-16-2007, 11:43 AM

I have been reading MR forum for quite some time, and am considering buying the Iliad. However, so many hardware problems and bad technical support have stopped me from buying it so far.

Especially when I read something like

Quote:

The iRex techsupport price is very high (350Euro).

makes me quiet worried. What do you mean by this BlackRat, your device is under warranty for one year and your repair should be free, or am I missing something here?!
If you have bricked Iliad it should be something like 70 EUR for repair.

I think the primary worry for anybody buying the Iliad should be the display damages (failures). We have seen many of these failures, and I think many of them are not from the pressure applied to them, but are due to some inherent problem with the displays. The problem is that iRex will not admit to this, and you will be forced to pay for the display replacement, even if you have done nothing to break it. Not to mention all the problems with battery (not) charging, noise problem recalls, non-booting Iliads and so on.

But even with all this I will probably be buying it in the end for one simple reason, it’s the only device out there (at least in Europe).

Bojan.

markiehill · 01-17-2007, 06:15 AM

i have had a device replaced for free which had a defective display, so i disagree that their support is bad, it depends on the circumstances under which it happened i suspect.

jæd · 01-17-2007, 06:35 AM

Quote:

Originally Posted by bojan

The problem is that iRex will not admit to this, and you will be forced to pay for the display replacement, even if you have done nothing to break it. Not to mention all the problems with battery (not) charging, noise problem recalls, non-booting Iliads and so on.

The problem is more there's a lot of misinformation out there... And that people who have experienced defective displays and other manufacturing problems are very much in the minority...!

bojan · 01-17-2007, 08:27 AM

I agree, and hope that people with these problems are really in minority. It’s just that that when you have a problem with the display (not just eInk) it comes down to arguing with the manufacturer over whose fault it is.

Regarding the support, I don’t have any personal experience (and hope I will not have to, when I receive mine

), it’s just that I seam to remember a lot of repaired DOA units, and people waiting for months to get their units back. I also can’t understand how can it take 3 weeks to get your ordered new unit shipped from one part of Europe to other?

NatCh · 01-17-2007, 12:14 PM

True, but that was in the very beginning, they do seem to have things under better control now.

01-13-2007, 08:18 AM	#1
BlackRat Junior Member Posts: 9 Karma: 10 Join Date: Jan 2007 Location: Russia, Moscow Device: Tungsten T3/iLiad/Nokia 6021	"Dead" iLiad Hi. I have "dead" iLiad. When I try to switch it on I can see only green led. No images... How can I access to the file system. Do I need special cable and/or software? The iRex techsupport price is very high (350Euro).

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cory Doctorow: "Hardware ebook readers are a dead end"	Alexander Turcic	News	214	12-31-2022 07:35 AM
Horror - "Dead Man's Eye" 50% at Smashwords, 9/26/10 only	brainycat	Deals and Resources (No Self-Promotion or Affiliate Links)	0	09-26-2010 09:34 PM
PRS-600 "Internal content invalid. Formatting" 600 crash (is it dead ?)	zelda_pinwheel	Sony Reader	93	02-18-2010 05:27 PM
Ended "Dead" eBookwise 1150 with cable, cord & case	stoogeswoman	Flea Market	3	06-06-2009 02:38 PM
"Print is Dead: Books in Our Digital Age" by Jeff Gomez	jasonkchapman	News	15	10-18-2007 06:05 PM

01-13-2007, 03:09 PM	#2
vranghel Addict Posts: 285 Karma: 10 Join Date: Apr 2006 Location: Vancouver, Canada Device: Proud Iliad owner	Is the led on solid, or blinking? Did u try to plug it in to recharge? Did u connect it to the computer to see if u can see the internals?

01-16-2007, 02:19 AM	#4
BlackRat Junior Member Posts: 9 Karma: 10 Join Date: Jan 2007 Location: Russia, Moscow Device: Tungsten T3/iLiad/Nokia 6021	Now I can see green led only when I press "ON". At the same time my computer shows me "Unknown USB device". It immediatly goes off when I release switch.

01-16-2007, 02:20 AM	#5
BlackRat Junior Member Posts: 9 Karma: 10 Join Date: Jan 2007 Location: Russia, Moscow Device: Tungsten T3/iLiad/Nokia 6021	The led is solid.

01-16-2007, 04:35 AM	#6
pdam Groupie Posts: 199 Karma: 100 Join Date: Aug 2006 Device: iLiad, iPaq, Psion5&7, Blackberry	Silly question - have you reset the device with the recessed switch on the back? Also is the device charged? Have you installed anything on the device other than content? Another silly question - I assume you haven't damaged the device - was there an event after which it stopped working?

01-16-2007, 05:44 AM	#7
BlackRat Junior Member Posts: 9 Karma: 10 Join Date: Jan 2007 Location: Russia, Moscow Device: Tungsten T3/iLiad/Nokia 6021	Reset... Many times. Device is charged. There was only iLiad software on the device and few docs. I didn't damage device (650Euro - it's expensive to me).

01-16-2007, 09:11 AM	#8
BlackRat Junior Member Posts: 9 Karma: 10 Join Date: Jan 2007 Location: Russia, Moscow Device: Tungsten T3/iLiad/Nokia 6021	When I press ЭЩТЭ for a long tome (10 sec) my computer shows me "Unknown USB device". May be I need special drivers for it (to access files)?

01-16-2007, 09:12 AM	#9
BlackRat Junior Member Posts: 9 Karma: 10 Join Date: Jan 2007 Location: Russia, Moscow Device: Tungsten T3/iLiad/Nokia 6021	When I press "ON"...

01-17-2007, 06:15 AM	#11
markiehill Connoisseur Posts: 94 Karma: 192 Join Date: Jul 2006	i have had a device replaced for free which had a defective display, so i disagree that their support is bad, it depends on the circumstances under which it happened i suspect.

01-17-2007, 08:27 AM	#13
bojan Enthusiast Posts: 48 Karma: 68 Join Date: Aug 2006 Location: Slovenia Device: iRex iLiad	I agree, and hope that people with these problems are really in minority. It’s just that that when you have a problem with the display (not just eInk) it comes down to arguing with the manufacturer over whose fault it is. Regarding the support, I don’t have any personal experience (and hope I will not have to, when I receive mine ), it’s just that I seam to remember a lot of repaired DOA units, and people waiting for months to get their units back. I also can’t understand how can it take 3 weeks to get your ordered new unit shipped from one part of Europe to other?

01-17-2007, 12:14 PM	#14
NatCh Gizmologist Posts: 11,615 Karma: 929550 Join Date: Jan 2006 Location: Republic of Texas Embassy at Jackson, TN Device: Pocketbook Touch HD3	True, but that was in the very beginning, they do seem to have things under better control now.

Advert

Advert