PRS-600 Trying to russify prs-600 -- help?

maxbookworm · 07-26-2010, 11:12 PM

I downloaded boroda version 1.05d. Double clicked the batch file, waited a while and figure it was as far as it was going to get (see image). Was I supposed to wait longer? Anyway, I disconnected the reader, reset it, and it's exactly the same as it was before. It offers Dutch as a language instead of Russion, and no clock

What am I missing?

Mike_73 · 07-27-2010, 07:51 AM

Not exactly sure here. I did russify my reader some while ago. But I think you're supposed to put the "installer" files on SD card and then run it on the reader.
If you don't have answers later, I'll check back once I get home from work.

dmapr · 07-27-2010, 02:51 PM

Quote:

Originally Posted by maxbookworm

I downloaded boroda version 1.05d. Double clicked the batch file, waited a while and figure it was as far as it was going to get (see image). Was I supposed to wait longer? Anyway, I disconnected the reader, reset it, and it's exactly the same as it was before. It offers Dutch as a language instead of Russion, and no clock

What am I missing?

You didn't wait long enough. The following screen shot is for PRS-900, but it's the same thing. Note the line that says "Sony Reader MSC utility…". Basically you have to wait until "press any key to continue…" appears on the screen.

maxbookworm · 07-27-2010, 03:03 PM

OK - thanks. I thought that might be the case, but the instructions didn't mention how long the wait might be. I waited probably 3-4 minutes.

So can I just re-launch the batch file even though I'm partially through the process you think?

dmapr · 07-27-2010, 05:12 PM

Quote:

Originally Posted by maxbookworm

OK - thanks. I thought that might be the case, but the instructions didn't mention how long the wait might be. I waited probably 3-4 minutes.

So can I just re-launch the batch file even though I'm partially through the process you think?

On my PRS-900 it certainly didn't take long at all — don't know if the PRS-600 is significantly slower or not.

Yes, you can relaunch since all you've got through was copying the files — the command to the reader to restart in flash mode was never sent since the utility hasn't started.

maxbookworm · 07-27-2010, 07:21 PM

Hmmm... so I tried it again and it did get past the "2 Files copied" point but then told me the device wasn't connected to the PC (although it was). So I disconnected and reconnected and now it won't get past the "2 files copied" point again (it's been a good 10 minutes). Maybe I'm just not destined to have a clock on my 600...

porkupan · 07-27-2010, 09:47 PM

Maybe you need to switch off the UAC?

Mike_73 · 07-28-2010, 01:05 AM

UAC is a good point. When I first put prs+ on my 505 it didn't work out.
Ever since then I ran all those "hacks" as admin and never had a problem again.
So instead of double clicking the batch program, right click and select "run as admin".

Maybe this helps

maxbookworm · 07-28-2010, 06:42 AM

Quote:

Originally Posted by Mike_73

UAC is a good point. When I first put prs+ on my 505 it didn't work out.
Ever since then I ran all those "hacks" as admin and never had a problem again.
So instead of double clicking the batch program, right click and select "run as admin".

Maybe this helps

Brilliant! Thank you thank you! It worked

Porkupan, thanks so much for making these programs available. I love having my clock!

One question: I went ahead and installed 1.05f and noticed you have this feature listed: back = OPTIONS + < . Does this mean if, for example, I'm in Collections, and choose one, e.g, News, then want to back out into my collections list, I should be able to do so by pressing OPTIONS + < ? I tried this, but the Options menu just kept coming up.

Thanks again guys!

porkupan · 07-28-2010, 07:10 AM

Quote:

Originally Posted by maxbookworm

I went ahead and installed 1.05f and noticed you have this feature listed: back = OPTIONS + < . Does this mean if, for example, I'm in Collections, and choose one, e.g, News, then want to back out into my collections list, I should be able to do so by pressing OPTIONS + < ? I tried this, but the Options menu just kept coming up.

Only while reading a book. If you jumped to some place and want to return back to previous page. Click OPTIONS, you will see two new buttons with arrows. But to go back you can just press the "<" button while the OPTIONS menu is on screen. I guess, this is an improvement only for those who don't like to touch the screen. Basically, navigation made just a little bit easier (going to the special navigation screen was always a bit of a pain).

Mike_73 · 07-28-2010, 09:24 AM

I'm glad I could help

Have fun. I love having the clock available, too. Keeps me from reading into the night (well, at least sometimes).

07-26-2010, 11:12 PM	#1
maxbookworm Addict Posts: 372 Karma: 1122865 Join Date: Apr 2010 Device: Kindle Voyage, Galaxy Note 2	Trying to russify prs-600 -- help? I downloaded boroda version 1.05d. Double clicked the batch file, waited a while and figure it was as far as it was going to get (see image). Was I supposed to wait longer? Anyway, I disconnected the reader, reset it, and it's exactly the same as it was before. It offers Dutch as a language instead of Russion, and no clock What am I missing? Attached Thumbnails Last edited by maxbookworm; 07-26-2010 at 11:15 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My thoughts, PRS-300, PRS-600, PRS-505, PRS-700, Kindle 2	zacheryjensen	Sony Reader	78	12-05-2010 07:33 PM
PRS-600 OK - so how do I de-Russify a PRS-600?	maxbookworm	Sony Reader	12	08-14-2010 01:03 AM
PRS-300 $150, PRS-600 $170 + $25 Gift Card; PRS-900 $250 + extra Battery @SonyUSA	Lilly	Deals and Resources (No Self-Promotion or Affiliate Links)	1	07-25-2010 02:14 PM
Canadian perspective of the recent Sony ebook readers - PRS-300/PRS-600/PRS-2121	nrapallo	News	1	08-29-2009 10:38 AM

07-27-2010, 07:51 AM	#2
Mike_73 Guru Posts: 750 Karma: 1323 Join Date: Dec 2009 Device: PRS-505, PRS-600, iPad 16GB Wifi, Kindle Voyage, Nexus 6, Razr HD	Not exactly sure here. I did russify my reader some while ago. But I think you're supposed to put the "installer" files on SD card and then run it on the reader. If you don't have answers later, I'll check back once I get home from work.

07-27-2010, 03:03 PM	#4
maxbookworm Addict Posts: 372 Karma: 1122865 Join Date: Apr 2010 Device: Kindle Voyage, Galaxy Note 2	OK - thanks. I thought that might be the case, but the instructions didn't mention how long the wait might be. I waited probably 3-4 minutes. So can I just re-launch the batch file even though I'm partially through the process you think?

07-27-2010, 07:21 PM	#6
maxbookworm Addict Posts: 372 Karma: 1122865 Join Date: Apr 2010 Device: Kindle Voyage, Galaxy Note 2	Hmmm... so I tried it again and it did get past the "2 Files copied" point but then told me the device wasn't connected to the PC (although it was). So I disconnected and reconnected and now it won't get past the "2 files copied" point again (it's been a good 10 minutes). Maybe I'm just not destined to have a clock on my 600...

07-27-2010, 09:47 PM	#7
porkupan Fanatic Posts: 556 Karma: 1057213 Join Date: Sep 2006 Location: North Eastern U.S. Device: Sony Reader	Maybe you need to switch off the UAC?

07-28-2010, 01:05 AM	#8
Mike_73 Guru Posts: 750 Karma: 1323 Join Date: Dec 2009 Device: PRS-505, PRS-600, iPad 16GB Wifi, Kindle Voyage, Nexus 6, Razr HD	UAC is a good point. When I first put prs+ on my 505 it didn't work out. Ever since then I ran all those "hacks" as admin and never had a problem again. So instead of double clicking the batch program, right click and select "run as admin". Maybe this helps

07-28-2010, 09:24 AM	#11
Mike_73 Guru Posts: 750 Karma: 1323 Join Date: Dec 2009 Device: PRS-505, PRS-600, iPad 16GB Wifi, Kindle Voyage, Nexus 6, Razr HD	I'm glad I could help Have fun. I love having the clock available, too. Keeps me from reading into the night (well, at least sometimes).

Advert

Advert