Power Button Stopped Working

Guns4Hire · 06-21-2010, 10:00 PM

Out of the blue my power button stopped working. Thought it might be a bug with the latest 15.2 so I did a reset and the button still isn't working. I had to turn off the setting where the keyboard automatically kicks in after five minutes because I couldn't use the device. I tried setting a keybind to the power button "double press on/off" and I set it to shutdown. But that didn't work either.

Might have to restore the configuration which should put it back to factory specs. Correct?

Anyone have a problem similar to this with any suggestions. I really don't want to send my PB360 back to be fixed or replaced. I don't think I could take it, I read way to much.

Help!

Guns4Hire · 06-21-2010, 10:04 PM

Ok actually looks like there is a short in the button. Booooo!!!

If I press at the very right side of the button with my finger nail then the button works. But if I press with my finger it doesn't. If I press the middle with my finger or nail, nothing. If I press the left side of the button with my finger or nail, nothing.

Man I am bummed. Now I have to figure out how to return it to be repaired/replaced. And I will be without my reader for probably a week or two. God forbid three weeks. I am going to go make a myself a drink.

Mickey330 · 06-21-2010, 10:33 PM

Aw, man, Guns4Hire! All I can do is offer you sympathy!

Hang in there.

Marilyn

kacir · 06-22-2010, 03:11 AM

Quote:

Originally Posted by Guns4Hire

Might have to restore the configuration which should put it back to factory specs. Correct?

Make BACKUP first!

IndecisiveMe · 06-22-2010, 04:03 AM

Ouch! I hope you get it back quickly.

Ulli · 06-23-2010, 06:05 PM

Did you already tried a hardware-reset?

Try to power it on.
Press the Center and the lower Wing button.
Follow the advice.
Wait about 20mins.

If its a real hardware damage, this should be fixed with guarantee (as long you still have

)

Schnitzelbrain · 06-23-2010, 07:19 PM

Quote:

Originally Posted by Ulli

Did you already tried a hardware-reset?

Try to power it on.
Press the Center and the upper Wing button.
Follow the advice.
Wait about 20mins.

If its a real hardware damage, this should be fixed with guarantee (as long you still have

)

LOWER large button NOT upper

Guns4Hire · 06-25-2010, 03:40 AM

Quote:

Originally Posted by Ulli

Did you already tried a hardware-reset?

Try to power it on.
Press the Center and the upper Wing button.
Follow the advice.
Wait about 20mins.

If its a real hardware damage, this should be fixed with guarantee (as long you still have

)

I am doing the hardware reset now. I thought it was the Center and Lower (least thats what I did) and it popped up what seems to be reset text. Told me to wait 10 min.

Guns4Hire · 06-25-2010, 05:04 AM

Well I think that did the trick. Power button seems normal and responsive. I am hoping it stays that way. I really don't want to send my ereader back. Would be a rough 2/3 weeks.

Anyway here is to hoping and praying to the book gods that this is fixed.

IndecisiveMe · 06-25-2010, 05:22 AM

I hope so! I figured it was a loose spring or something under the power button from your first description about it working if you pushed it in a different place.

Good luck and hopefully it's fixed!

fearbless · 06-15-2022, 05:32 AM

Quote:

Originally Posted by Guns4Hire

I am doing the hardware reset now. I thought it was the Center and Lower (least thats what I did) and it popped up what seems to be reset text. Told me to wait 10 min.

Hello. I have the same problem with my mother's Pocketbook Basic 4. The start (the small white button below) does not include the book. After a lot of pressure he left. Turns on to load and the time is confused and does not remember the page. Has the factory reset pollinated things?

Renate · 06-15-2022, 09:07 AM

There's a very easy fix for these kind of things:

fearbless · 06-15-2022, 10:06 AM

Quote:

Originally Posted by Renate

There's a very easy fix for these kind of things:

How will the device start with this and isn't there too much glue? How will the device start with this and isn't there too much glue? How will this thing be placed when the original button is small. We tried it a few times and released the book, but not always.

Renate · 06-15-2022, 11:35 AM

I was trying to be funny.
My older devices are used mostly for regression and helping other people.
The power switch on the Nook Glow 2 was always a horrible design.
You could never tell if it was pressed which makes you press harder which eventually kills the switch.
I couldn't be bothered to try to make an inboard power switch. That microswitch was available.
Besides, that Glow 2 doesn't even have a battery, I run it off a 4V supply.

06-21-2010, 10:00 PM	#1
Guns4Hire Reading...Since 1970 Posts: 610 Karma: 7819 Join Date: Jan 2010 Device: Nova Air C, Nova Pro, LifebookMars, BoyueT62+ Glowlight, NST, PB360	Power Button Stopped Working Out of the blue my power button stopped working. Thought it might be a bug with the latest 15.2 so I did a reset and the button still isn't working. I had to turn off the setting where the keyboard automatically kicks in after five minutes because I couldn't use the device. I tried setting a keybind to the power button "double press on/off" and I set it to shutdown. But that didn't work either. Might have to restore the configuration which should put it back to factory specs. Correct? Anyone have a problem similar to this with any suggestions. I really don't want to send my PB360 back to be fixed or replaced. I don't think I could take it, I read way to much. Help!

06-23-2010, 06:05 PM	#6
Ulli (-: Posts: 667 Karma: 1310 Join Date: Nov 2009 Location: Frankonia Device: PocketBook 360°,302	Did you already tried a hardware-reset? Try to power it on. Press the Center and the lower Wing button. Follow the advice. Wait about 20mins. If its a real hardware damage, this should be fixed with guarantee (as long you still have ) Last edited by Ulli; 06-26-2010 at 04:18 AM.

06-15-2022, 09:07 AM	#12
Renate Onyx-maniac Posts: 4,125 Karma: 18764971 Join Date: Feb 2012 Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5, Go6	There's a very easy fix for these kind of things: Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DR1000 HELP!! my stylus stopped working	splendor	iRex	7	06-16-2010 12:35 PM
PRS-600 My EBook Library stopped working	just_kev	Sony Reader	5	12-10-2009 04:18 AM
Whispernet Stopped Working	weatherman	Amazon Kindle	19	03-29-2009 03:41 PM
Stopped working?	pshrynk	Calibre	8	02-14-2009 05:43 PM
libprs500 stopped working on my Mac	jaybee	Calibre	7	03-05-2008 05:28 PM

06-21-2010, 10:04 PM	#2
Guns4Hire Reading...Since 1970 Posts: 610 Karma: 7819 Join Date: Jan 2010 Device: Nova Air C, Nova Pro, LifebookMars, BoyueT62+ Glowlight, NST, PB360	Ok actually looks like there is a short in the button. Booooo!!! If I press at the very right side of the button with my finger nail then the button works. But if I press with my finger it doesn't. If I press the middle with my finger or nail, nothing. If I press the left side of the button with my finger or nail, nothing. Man I am bummed. Now I have to figure out how to return it to be repaired/replaced. And I will be without my reader for probably a week or two. God forbid three weeks. I am going to go make a myself a drink.

06-21-2010, 10:33 PM	#3
Mickey330 Addict Posts: 378 Karma: 1107420 Join Date: Dec 2009 Location: Western New York state (USA) Device: Kindle Oasis & the Kindle app on iDevices	Aw, man, Guns4Hire! All I can do is offer you sympathy! Hang in there. Marilyn

06-22-2010, 04:03 AM	#5
IndecisiveMe Addict Posts: 276 Karma: 106 Join Date: Jan 2010 Location: Melbourne, Australia Device: Pocketbook 360, Sony PRS-T1	Ouch! I hope you get it back quickly.

06-25-2010, 05:04 AM	#9
Guns4Hire Reading...Since 1970 Posts: 610 Karma: 7819 Join Date: Jan 2010 Device: Nova Air C, Nova Pro, LifebookMars, BoyueT62+ Glowlight, NST, PB360	Well I think that did the trick. Power button seems normal and responsive. I am hoping it stays that way. I really don't want to send my ereader back. Would be a rough 2/3 weeks. Anyway here is to hoping and praying to the book gods that this is fixed.

06-25-2010, 05:22 AM	#10
IndecisiveMe Addict Posts: 276 Karma: 106 Join Date: Jan 2010 Location: Melbourne, Australia Device: Pocketbook 360, Sony PRS-T1	I hope so! I figured it was a loose spring or something under the power button from your first description about it working if you pushed it in a different place. Good luck and hopefully it's fixed!

06-15-2022, 11:35 AM	#14
Renate Onyx-maniac Posts: 4,125 Karma: 18764971 Join Date: Feb 2012 Device: Nook NST, Glow2, 3, 4, '21, Kobo Aura2, Poke3, Poke5, Go6	I was trying to be funny. My older devices are used mostly for regression and helping other people. The power switch on the Nook Glow 2 was always a horrible design. You could never tell if it was pressed which makes you press harder which eventually kills the switch. I couldn't be bothered to try to make an inboard power switch. That microswitch was available. Besides, that Glow 2 doesn't even have a battery, I run it off a 4V supply.

Advert

Advert