Connect Kindle 1 with TTL, can't boot.pls Help

michaelyzy · 05-12-2010, 03:25 AM

I follow the blog of http://igorsk.blogspot.com to hacking into my Kindle1.

My Kindle1 can not boot to the system.

The info below is my Kindle 1 booting log.

Also, during the testing for the Kindle, I found the chip of USB controller is very hot. Is it this problem to cause the machine down?

Pls help. Thanks.

check_recovery: shift-<r>ecover, shift-<u>pdate, shift-</> reset...
normal boot...

U-Boot 1.1.2 (Sep 11 2008 - 15:36:04)

*** Welcome to Kindle ***

U-Boot code: A3F00000 -> A3F3FBBC BSS: -> A3F779A4
Saw a REV3 board, spoofing as a REV2...

REV3 Bootloader: Kindle 400 MHz REV2 Board, Revision #9
Boot block version: 20080909
Checksum: 0x20D313BD
Buildrev: 002-KU1-1.1.1-023892
IOC Firmware Version #65

RAM Configuration:
Bank #0: 0xA0000000 64 MB
Flash Configuration:
Bank #0: 0x00000000 128 MB
Bank #1: 0x04000000 128 MB
NAND Configuration:
256 MB
BML_Init success
BML_Open success
**************** device info *******************
nPgsPerBlk = 64
nSctsPerPg = 4
nNumOfUsBlks = 2002
*************************************************
bml open success
pi->nNumOfPartEntry: 10Success loading partition

--------------------------------------------

No other more infomation when boot. Above sentence is the last one.

Thanks.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
eBook can't read the books I've imported, pls pls help	Ky306	Fictionwise eBookwise	6	10-11-2010 01:21 AM
Accessories Anyone recommend a UK charger for the Kindle 2 pls	blackcat	Amazon Kindle	3	07-02-2010 10:31 AM
kindle dx cannot boot!! pls help me	chinaet	Amazon Kindle	3	07-19-2009 09:23 PM
Kindle boot log	igorsk	Kindle Developer's Corner	1	12-07-2007 08:33 PM
Kindle boot logs	Nate the great	Kindle Developer's Corner	10	11-27-2007 10:56 AM

05-12-2010, 03:25 AM	#1
michaelyzy Junior Member Posts: 3 Karma: 10 Join Date: Apr 2010 Device: Kindle 1	Connect Kindle 1 with TTL, can't boot.pls Help I follow the blog of http://igorsk.blogspot.com to hacking into my Kindle1. My Kindle1 can not boot to the system. The info below is my Kindle 1 booting log. Also, during the testing for the Kindle, I found the chip of USB controller is very hot. Is it this problem to cause the machine down? Pls help. Thanks. check_recovery: shift-<r>ecover, shift-<u>pdate, shift-</> reset... normal boot... U-Boot 1.1.2 (Sep 11 2008 - 15:36:04) * Welcome to Kindle * U-Boot code: A3F00000 -> A3F3FBBC BSS: -> A3F779A4 Saw a REV3 board, spoofing as a REV2... REV3 Bootloader: Kindle 400 MHz REV2 Board, Revision #9 Boot block version: 20080909 Checksum: 0x20D313BD Buildrev: 002-KU1-1.1.1-023892 IOC Firmware Version #65 RAM Configuration: Bank #0: 0xA0000000 64 MB Flash Configuration: Bank #0: 0x00000000 128 MB Bank #1: 0x04000000 128 MB NAND Configuration: 256 MB BML_Init success BML_Open success ************** device info *************** nPgsPerBlk = 64 nSctsPerPg = 4 nNumOfUsBlks = 2002 *********************************************** bml open success pi->nNumOfPartEntry: 10Success loading partition -------------------------------------------- No other more infomation when boot. Above sentence is the last one. Thanks.