What text size do you use?

shmish · 02-04-2010, 07:42 PM

I'd like to know what text size people use, and with which reader. I don't own a sony yet, and it's a tough decision between the 300 (I would have to use S text size) and 600 (could use M).

Thanks

Bremen Cole · 02-04-2010, 07:51 PM

On my 300 I format books in Calibre to 14 point base font. Then read in my 300 on m. Eyes aren't so great, so it works for me. I could read on s, but lighting is the issue. I read on the equivalent s on my iphone, because it is backlit and easier to see (better contrast).

Croptop · 02-04-2010, 09:19 PM

I read on a PRS-300 set to 'S'.

Levelpart · 02-04-2010, 09:32 PM

I usually use s for books and m when I'm reading some pdfs

colinsky · 02-04-2010, 09:45 PM

For epubs -- I use "S" for for Calibre or Feedbooks-created books, S, M, or L for commercial ebooks (depending on the base font size, which varies). Frequently pop up a size when tired or when the light is low (e.g. on the bus at night).

PDFS on "M" which is the smaller reflow size.

For LRFs, I've found much of the time that even the "S" size is bigger than I prefer.

RonF · 02-04-2010, 10:26 PM

I put my ePub's through Calibre with a 14pt font and read on Small with my PRS-300. Seems a good fit for me.

Ladylynn · 02-04-2010, 10:36 PM

It never occurred to me to change the font size in Calibre -- I'll have to try that.

For me, it depends on the lighting situation I'm in. If I've got a lot of light, I can read on my 600 in the S size. If the lighting's not bright (a lamp or similar), I up the font to M.

JSWolf · 02-04-2010, 10:43 PM

I have a 505 and I use ePub with the base font at the default size. I use small. But remember, the 505 has a better screen (6" instead of 5").

shmish · 02-05-2010, 12:39 AM

Thanks for the input everyone.
The PRS-300 seems like a good fit for me. I wasn't sure if the S font would be too small, but my eyes are good so if it works for other people then I think I should be okay.

cheers

02-04-2010, 07:42 PM	#1
shmish Junior Member Posts: 9 Karma: 10 Join Date: Feb 2010 Location: Vancouver BC Device: PRS-300	What text size do you use? I'd like to know what text size people use, and with which reader. I don't own a sony yet, and it's a tough decision between the 300 (I would have to use S text size) and 600 (could use M). Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Text size	TheCrazier	Sigil	3	08-06-2010 05:42 PM
PRS-300 text size	pea	Sony Reader	7	12-06-2009 11:33 AM
PRS-600 text size	poshm	Sony Reader	7	11-02-2009 01:35 PM
Changing text size	GBC	Calibre	0	05-23-2009 07:10 PM
Default Text Size	jlbfoot	Sony Reader	19	12-29-2008 03:41 PM

02-04-2010, 07:51 PM	#2
Bremen Cole Wizard Posts: 1,115 Karma: 2718 Join Date: Dec 2009 Location: Texas Device: iPad	On my 300 I format books in Calibre to 14 point base font. Then read in my 300 on m. Eyes aren't so great, so it works for me. I could read on s, but lighting is the issue. I read on the equivalent s on my iphone, because it is backlit and easier to see (better contrast).

02-04-2010, 09:19 PM	#3
Croptop Groupie Posts: 171 Karma: 1018434 Join Date: Nov 2009 Device: Kobo Elipsa, Kobo Aura One, Pixel 8 Pro	I read on a PRS-300 set to 'S'.

02-04-2010, 09:32 PM	#4
Levelpart Member Posts: 15 Karma: 10 Join Date: Jan 2010 Device: Sony PRS 600	I usually use s for books and m when I'm reading some pdfs

02-04-2010, 09:45 PM	#5
colinsky Addict Posts: 240 Karma: 3500000 Join Date: Sep 2009 Device: Sony PRS-300, PRS-T1, PRS-T3	For epubs -- I use "S" for for Calibre or Feedbooks-created books, S, M, or L for commercial ebooks (depending on the base font size, which varies). Frequently pop up a size when tired or when the light is low (e.g. on the bus at night). PDFS on "M" which is the smaller reflow size. For LRFs, I've found much of the time that even the "S" size is bigger than I prefer.

02-04-2010, 10:26 PM	#6
RonF Zealot Posts: 139 Karma: 306 Join Date: Jan 2010 Location: NY Device: Sony PRS-300, K3 WiFi, K4 NT, PW2	I put my ePub's through Calibre with a 14pt font and read on Small with my PRS-300. Seems a good fit for me.

02-04-2010, 10:36 PM	#7
Ladylynn Shoulda known better... Posts: 25 Karma: 32 Join Date: Jan 2010 Device: Sony PRS-600	It never occurred to me to change the font size in Calibre -- I'll have to try that. For me, it depends on the lighting situation I'm in. If I've got a lot of light, I can read on my 600 in the S size. If the lighting's not bright (a lamp or similar), I up the font to M.

02-04-2010, 10:43 PM	#8
JSWolf Resident Curmudgeon Posts: 79,018 Karma: 144284074 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	I have a 505 and I use ePub with the base font at the default size. I use small. But remember, the 505 has a better screen (6" instead of 5").

02-05-2010, 12:39 AM	#9
shmish Junior Member Posts: 9 Karma: 10 Join Date: Feb 2010 Location: Vancouver BC Device: PRS-300	Thanks for the input everyone. The PRS-300 seems like a good fit for me. I wasn't sure if the S font would be too small, but my eyes are good so if it works for other people then I think I should be okay. cheers

Advert

Advert