release candidate 0.2-rc3

dottedmag · 10-21-2009, 08:17 PM

Fatal flaws were found in 0.2-rc2, so here is 0.2-rc3.

Since I'm too lazy (and sleepy) to format the changelog text for the forum, please just have a look at it over here.

As usual:

ascherjim · 10-22-2009, 11:32 AM

Dottedmag; I regret to inform you that the live version in your new 0.2-rc3 has once again reformatted my BeBook internal memory to jffs2 from fat 16 when I used (successfully) the live OI from my SD card. In order to access my internal drive afterward, XP required that I reformat it back to Fat 16. Fortunately (and thanks to the earlier guidance I received from Dave_S) I was prepared for this contingency and was able to reformat the internal drive and reload my titles from the back-up I had prepared. So, for you and your stalwart co-workers, I guess it's back to the drawing board (at least based on what I've just experienced). Good luck.

dottedmag · 10-24-2009, 09:35 AM

Ah, damn. Thanks for reporting: something is screwed in build process.

Frankr · 10-24-2009, 09:34 PM

GREAT JOB! I love it! Now if I can add my own logo I'd be even happier. Is it possible to swap a different logo screen at boot-up?

mrgoodkat · 10-24-2009, 11:46 PM

Do I understand that correctly that the kernel bug that caused the Hanvon N516 to use up the battery in a day is fixed now?

dottedmag · 10-26-2009, 02:26 PM

Quote:

Originally Posted by mrgoodkat

Do I understand that correctly that the kernel bug that caused the Hanvon N516 to use up the battery in a day is fixed now?

Yes, it is.

ArgonZ · 10-26-2009, 06:19 PM

has anyone reported that rc3 is slow while locking and unlocking?
I've upgraded from the 20091001 version, and I noticed that when I lock the device the green led flashes for a while before proceeding. unlocking has the same efect.

Shall I format and reflash, or should I just go back to the 20091001?

Besides this side effect, the madshelf is looking good.

EDIT: Reflashed back to 20091001 version, I also noticed that there is an open ticket by dottedmag on the subject. I guess I'll have to wait for rc4.

Reader2 · 10-28-2009, 05:17 PM

Well. for so far ... whow a face lift ... and organization is also a "little" different. Took some time to format the memory but ran. Now i've to find time to have a readers experience.
THX for the work done.

ascherjim · 10-31-2009, 11:20 AM

Quote:

Originally Posted by dottedmag

Ah, damn. Thanks for reporting: something is screwed in build process.

Dottedmag: As I earlier reported that the live version in your new 0.2-rc3 still continues to reformat my BeBook internal memory to jffs2 from fat 16, I have reluctantly decided to hold off in attempting any further trials of the live version until you or someone else in this forum reports that this glitch has been resolved, through actual trial. I really want to be able to access the dual firmwares (BeBook and OI) in my one reader, and hope that this problem can ultimately be sorted out. Many thanks.

dottedmag · 11-02-2009, 01:07 PM

Quote:

Originally Posted by ArgonZ

EDIT: Reflashed back to 20091001 version, I also noticed that there is an open ticket by dottedmag on the subject. I guess I'll have to wait for rc4.

This apparent slowness is now fixed. Could you try a latest snapshot and see whether it is fast or slow for you?

sprotte · 11-05-2009, 03:18 AM

Hello,
I have installed rc3 on my bebook and it looks very nice. Mobi and EPub viewer seem to be working quite well. With _very_ large ebooks (~ 100 MB, many graphics), Mobi format seems to crash less often than Epup format. However, the PDF viewer seems to be quite unstable at present. Is PDF text reflow available with the current version? If it is not available, I would really appreciate if this feature was added :-)
Cheers, sprotte

10-21-2009, 08:17 PM	#1
dottedmag OpenInkpot co-founder Posts: 410 Karma: 845 Join Date: Dec 2007 Device: Kindle Oasis	release candidate 0.2-rc3 Fatal flaws were found in 0.2-rc2, so here is 0.2-rc3. Since I'm too lazy (and sleepy) to format the changelog text for the forum, please just have a look at it over here. As usual: Installation Guide Users' Guide Downloads

10-26-2009, 06:19 PM	#7
ArgonZ Member Posts: 18 Karma: 10 Join Date: Feb 2008 Location: Lisbon, Portugal Device: Hanlin V3	has anyone reported that rc3 is slow while locking and unlocking? I've upgraded from the 20091001 version, and I noticed that when I lock the device the green led flashes for a while before proceeding. unlocking has the same efect. Shall I format and reflash, or should I just go back to the 20091001? Besides this side effect, the madshelf is looking good. EDIT: Reflashed back to 20091001 version, I also noticed that there is an open ticket by dottedmag on the subject. I guess I'll have to wait for rc4. Last edited by ArgonZ; 10-29-2009 at 07:01 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
release candidate 0.2-rc6	lunohod	OpenInkpot	0	12-04-2009 06:24 PM
release candidate 0.2-rc5	dottedmag	OpenInkpot	50	12-04-2009 05:44 AM
release candidate 0.2-rc4	dottedmag	OpenInkpot	10	11-12-2009 01:35 PM
release candidate 0.2-rc1	dottedmag	OpenInkpot	36	10-18-2009 01:07 AM
Sophie Early Release Candidate 6 is out	sic	News	0	08-01-2007 07:28 PM

10-22-2009, 11:32 AM	#2
ascherjim Addict Posts: 260 Karma: 274 Join Date: Apr 2006 Location: Gig Harbor, Washington Device: BeBook One, PocketBook 360, Kindle Paperwhite, Kobo Aura One	Dottedmag; I regret to inform you that the live version in your new 0.2-rc3 has once again reformatted my BeBook internal memory to jffs2 from fat 16 when I used (successfully) the live OI from my SD card. In order to access my internal drive afterward, XP required that I reformat it back to Fat 16. Fortunately (and thanks to the earlier guidance I received from Dave_S) I was prepared for this contingency and was able to reformat the internal drive and reload my titles from the back-up I had prepared. So, for you and your stalwart co-workers, I guess it's back to the drawing board (at least based on what I've just experienced). Good luck.

10-24-2009, 09:35 AM	#3
dottedmag OpenInkpot co-founder Posts: 410 Karma: 845 Join Date: Dec 2007 Device: Kindle Oasis	Ah, damn. Thanks for reporting: something is screwed in build process.

10-24-2009, 09:34 PM	#4
Frankr Zealot Posts: 129 Karma: 1012044 Join Date: Jun 2009 Location: Connecticut (USA) Device: EzReader, Sony 650, Kindle 5, Onyx i62HD, Kobo Aura HD	GREAT JOB! I love it! Now if I can add my own logo I'd be even happier. Is it possible to swap a different logo screen at boot-up?

10-24-2009, 11:46 PM	#5
mrgoodkat Junior Member Posts: 6 Karma: 38 Join Date: Oct 2009 Device: Hanvon N516	Do I understand that correctly that the kernel bug that caused the Hanvon N516 to use up the battery in a day is fixed now?

10-28-2009, 05:17 PM	#8
Reader2 intentionally left blank Posts: 28 Karma: 12 Join Date: Jun 2009 Location: Netherlands Device: BeBook (display damage) so 2nd: Nook still working; Sony hardly used;	Well. for so far ... whow a face lift ... and organization is also a "little" different. Took some time to format the memory but ran. Now i've to find time to have a readers experience. THX for the work done.

11-05-2009, 03:18 AM	#11
sprotte Junior Member Posts: 1 Karma: 10 Join Date: Nov 2009 Device: bebook	Hello, I have installed rc3 on my bebook and it looks very nice. Mobi and EPub viewer seem to be working quite well. With _very_ large ebooks (~ 100 MB, many graphics), Mobi format seems to crash less often than Epup format. However, the PDF viewer seems to be quite unstable at present. Is PDF text reflow available with the current version? If it is not available, I would really appreciate if this feature was added :-) Cheers, sprotte

Advert

Advert