Cover for PRS-600

tigriss7 · 10-10-2009, 10:40 PM

I'm getting a PRS-600. I know the previous PRS-505 cases can hold the 600s minding that they aren't configured to fit exactly the layout of the buttons. Amazon is selling the non-specilized leather versions for a discount since the 505 is discontinued. I wouldl like to know what case you have and where I can get one from. I'm particularly interested in the one with the light wedge device. I don't have a Staples, so no clearance for me. Bummer. Thanks for the help.

Juliette · 10-11-2009, 03:47 AM

M-Edge ones are often sold as non-specialised. I have two of them, one that I use with my 505 but became the "fitting" for the 600, and the new one that goes with the 600. I can say they're different, even being of the same line and the same builder, the first being a perfect fit but in green- my 600 is red- while the second, in mocha, could have the button issue you mention.

One solution is to cut a bit of the strap (it's feasible and not too defacing). I just found another solution: I used a bit of the plastic foam the cover comes with, cutting just a 2 cm x 0,5 cm rectangle, and inserted it between the strap and the button, and it works- it cushions the pressure. I hope it will change with time; anyway the plastic foam is not too visible (dark grey on mocha, and there's a light grey microfibre lining inside the cover).

As for the light, I have a clip-on light (which works better on a Reader/liseuse than on a book, it won't go in the way for the page-turning

) and I'm waiting for a Mighty Bright reading light. I'm not really sure about the light wedge- a lot of people complained about it in the 505 forum, and of course there's the issue of the clarity of the 600 screen, so one wouldn't feel so sure to recommend it! (the light-wedge one for the 505 isn't perfectly ok for the 600, also.)

dontriston · 10-11-2009, 08:49 AM

Hello.

I use a M-edge cover for the 700 in the 600, and is perfect for me.

If you want some pictues, I can send them you.

Bye.

NSqirrel · 10-11-2009, 10:41 AM

Quote:

Originally Posted by tigriss7

I'm getting a PRS-600. ...Amazon is selling the non-specilized leather versions for a discount since the 505 is discontinued. ...

I bought one of these, which cost of £12, I think, with my PRS 600 from W.H Smiths as a start. I thought that I would experiment with it and decide what cover I really want/need. As I use it at home almost all the time, so far the 505 cover is fine.

llreader · 10-16-2009, 08:35 AM

Quote:

Originally Posted by dontriston

Hello.

I use a M-edge cover for the 700 in the 600, and is perfect for me.

If you want some pictues, I can send them you.

Bye.

Could you post pics? Thanks!

sahmad88 · 10-16-2009, 08:47 AM

Quote:

Originally Posted by llreader

Could you post pics? Thanks!

I would also love to see pics of how the 600 looks in a case for the 700. Thanks.

llreader · 10-16-2009, 09:38 AM

Yes, the 700 case is on sale for $15 now. Even with $20 shipping to Europe, it is cheaper than anything else out there, and they are nice covers (or so I hear).

Sony says the 600 is the following size:

Dimensions (Approx.) : 6.9 x 4.8 x .4 inches (LxWxD) (sorry, no metric)

And the 700 is:
Dimensions (Approx.) : Approx. 5 1/9 x 6 7/9 x 13/32 inches (127.6 x 174.3 x 9.7 mm)
(weird how they reversed height and width and decimal and fractions)

The 700 is 12.8 cm x 17.4 cm.
The 600 is 12.2 cm x 17.5 cm (odd the 600 is taller).

So it looks like they could fit in the same case. More than half a cm in width might be an issue.

donistron, does it stay in Ok? Did you have to modify it any?

dontriston · 10-16-2009, 05:32 PM

Hello.

Here are the promess.

Bye

llreader · 10-16-2009, 06:01 PM

Gracias, Don Triston!

I went ahead and ordered one already, but the pictures are great. The black cover is lovely - too bad they are sold out. I got the brown and tan one.

dontriston · 10-17-2009, 04:35 AM

De nada, Ilreader...

Do you know this web?

http://www.lectoreselectronicos.com/

Bye.

llreader · 10-17-2009, 07:33 AM

Quote:

Originally Posted by dontriston

De nada, Ilreader...

Do you know this web?

http://www.lectoreselectronicos.com/

Bye.

Yes, thanks, but since my first language is English, MobileRead suits me better. I will take a look to see if there is anything Specific to Spain (places to purchase memory cards, or something like that).

Grandma Aubbie · 10-17-2009, 09:02 AM

I did a video review of the M-Edge 505 Cover for my Sony 600 on Amazon:

http://www.amazon.com/review/R1WSGRL...cm_cr_rdp_perm

When I bought it, it was down to $14.95 - up higher now ...

llreader · 10-17-2009, 11:52 AM

Nicely done! Yes, the 700 cover is on sale now, so I got that. I guess they are cleaning out their stock.

10-10-2009, 10:40 PM	#1
tigriss7 Purrrrrr Posts: 12 Karma: 10 Join Date: Oct 2009 Device: none	Cover for PRS-600 I'm getting a PRS-600. I know the previous PRS-505 cases can hold the 600s minding that they aren't configured to fit exactly the layout of the buttons. Amazon is selling the non-specilized leather versions for a discount since the 505 is discontinued. I wouldl like to know what case you have and where I can get one from. I'm particularly interested in the one with the light wedge device. I don't have a Staples, so no clearance for me. Bummer. Thanks for the help.

10-16-2009, 09:38 AM	#7
llreader Mesmerist Posts: 331 Karma: 506558 Join Date: Sep 2009 Location: Spain Device: PRS-600 Silver. Much nicer than I expected.	Yes, the 700 case is on sale for $15 now. Even with $20 shipping to Europe, it is cheaper than anything else out there, and they are nice covers (or so I hear). Sony says the 600 is the following size: Dimensions (Approx.) : 6.9 x 4.8 x .4 inches (LxWxD) (sorry, no metric) And the 700 is: Dimensions (Approx.) : Approx. 5 1/9 x 6 7/9 x 13/32 inches (127.6 x 174.3 x 9.7 mm) (weird how they reversed height and width and decimal and fractions) The 700 is 12.8 cm x 17.4 cm. The 600 is 12.2 cm x 17.5 cm (odd the 600 is taller). So it looks like they could fit in the same case. More than half a cm in width might be an issue. donistron, does it stay in Ok? Did you have to modify it any? Last edited by llreader; 10-16-2009 at 10:14 AM. Reason: Added dimensions

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does the light cover for the PRS-600 fit the PRS-505?	Ler0y Jenkins	Sony Reader	3	11-10-2009 04:24 PM
PRS-600 M-Edge cover PRS-600 available	Rumpelteazer	Sony Reader	6	11-09-2009 09:27 PM
Cover for PRS-300 and PRS-600 on sale 11/1-11/2 only!	terekkincaid	Sony Reader	3	11-02-2009 11:55 PM
PRS-600 M-Edge cover for PRS-700 on the PRS-600	Juliette	Sony Reader	5	09-29-2009 01:34 PM

10-11-2009, 03:47 AM	#2
Juliette I eat books Posts: 601 Karma: 5124 Join Date: Jun 2009 Location: Milan, Italy Device: Gen3 PRS-505 PRS-600 PB360 PB302 K2 Opus BebookMini OnyxBoox K3 KDXG	M-Edge ones are often sold as non-specialised. I have two of them, one that I use with my 505 but became the "fitting" for the 600, and the new one that goes with the 600. I can say they're different, even being of the same line and the same builder, the first being a perfect fit but in green- my 600 is red- while the second, in mocha, could have the button issue you mention. One solution is to cut a bit of the strap (it's feasible and not too defacing). I just found another solution: I used a bit of the plastic foam the cover comes with, cutting just a 2 cm x 0,5 cm rectangle, and inserted it between the strap and the button, and it works- it cushions the pressure. I hope it will change with time; anyway the plastic foam is not too visible (dark grey on mocha, and there's a light grey microfibre lining inside the cover). As for the light, I have a clip-on light (which works better on a Reader/liseuse than on a book, it won't go in the way for the page-turning ) and I'm waiting for a Mighty Bright reading light. I'm not really sure about the light wedge- a lot of people complained about it in the 505 forum, and of course there's the issue of the clarity of the 600 screen, so one wouldn't feel so sure to recommend it! (the light-wedge one for the 505 isn't perfectly ok for the 600, also.)

10-11-2009, 08:49 AM	#3
dontriston Connoisseur Posts: 57 Karma: 500 Join Date: Jun 2009 Location: Spain Device: Sony prs 600	Hello. I use a M-edge cover for the 700 in the 600, and is perfect for me. If you want some pictues, I can send them you. Bye.

10-16-2009, 05:32 PM	#8
dontriston Connoisseur Posts: 57 Karma: 500 Join Date: Jun 2009 Location: Spain Device: Sony prs 600	Hello. Here are the promess. Bye

10-16-2009, 06:01 PM	#9
llreader Mesmerist Posts: 331 Karma: 506558 Join Date: Sep 2009 Location: Spain Device: PRS-600 Silver. Much nicer than I expected.	Gracias, Don Triston! I went ahead and ordered one already, but the pictures are great. The black cover is lovely - too bad they are sold out. I got the brown and tan one.

10-17-2009, 04:35 AM	#10
dontriston Connoisseur Posts: 57 Karma: 500 Join Date: Jun 2009 Location: Spain Device: Sony prs 600	De nada, Ilreader... Do you know this web? http://www.lectoreselectronicos.com/ Bye.

10-17-2009, 09:02 AM	#12
Grandma Aubbie Grandma Aubbie Posts: 79 Karma: 229 Join Date: Aug 2009 Location: Southwest Kansas Device: sony 600	I did a video review of the M-Edge 505 Cover for my Sony 600 on Amazon: http://www.amazon.com/review/R1WSGRL...cm_cr_rdp_perm When I bought it, it was down to $14.95 - up higher now ...

10-17-2009, 11:52 AM	#13
llreader Mesmerist Posts: 331 Karma: 506558 Join Date: Sep 2009 Location: Spain Device: PRS-600 Silver. Much nicer than I expected.	Nicely done! Yes, the 700 cover is on sale now, so I got that. I guess they are cleaning out their stock.

Advert

Advert