A simple question - When turning on the reader...

rgeorg · 05-02-2009, 04:30 AM

Hi,
Sorry if this has been answered somewhere else, but should be a quick answer. Does the Hanlin (any flavor) or the Sony for that matter, pick up from where you left off reading when you turn it on - or does one have to go through the menus to open a specific bookmarked book?

In other words, I can close my mp3 player as I am listening to a book. When I turn it on again it starts immediately from where I left off. Does an ebook reader function similarly?

I would assume that it does - but you never know
Thanks for any assistance!

AlfonsVH · 05-02-2009, 06:22 AM

You can't immediately return to a book when switching it on, but you can use the key-lock function instead of switching it off. (i.e. short press on the powerbutton)
It hardly takes any battery to suspend the reader.

Stitchawl · 05-02-2009, 07:04 AM

When I'm reading a book on my Sony 505 and turn off the reader, when I restart it later it will open at the same page that I left off. If I want to read a couple of books at the same time, I simply 'bookmark' the page I'm stopping at, and open another bookmark for a different book. If I'm only reading one book I don't bother to bookmark it. If I have gone back to the main menu before turning off the reader, when I turn it back on there is an option to 'continue reading' for the book I had at log off.

Stitchawl

rgeorg · 05-02-2009, 07:44 AM

Thanks very much for the info - sounds like both devices handle it one way or another!

Gudy · 05-02-2009, 04:23 PM

The Hanlin remembers the last position when you close a book or shutdown the reader, so when you open the book again, it jumps to that position. It does not automatically open the last book when you start the device, though. Instead, it has a special folder in the root directory which contains the eight most recently opened books. Combine these two features, and it takes no more than two key presses after starting the device to return to the last position for the last eight books you've read.

The Hanlin has a very good power save mode, though, so unless you put the device away for a couple of days, you might just as well keep it running or put it into key-lock mode, as AlfonsVH described.

oddity · 05-03-2009, 05:01 PM

Hanlin (BeBook) saves the last page read for any file on the storage medium that file is saved (main memory or SD) in a hidden directory with binary files created for that purpose. With a similar way it also saves a list of recent files opened for each storage medium. Even switching between Hanlin's and BeBook's firmware you can still read this metadata as they use the same format, but not with LBOOK's or OpenInkpot firmware.

This feature works great on Hanlin/BeBook, it never forgets the last page you read because it's stored on the same storage medium the file is saved at, so in a sense the last pages read go together with the ebook file

so there is no problem even if you regularly change SD cards, provided of course you don't remove the SD cards too quickly after file or pageturn operations.

I have never noticed any problem with shutdown/bootup as well.

DaleDe · 05-04-2009, 11:14 AM

Quote:

Originally Posted by oddity

Hanlin (BeBook) saves the last page read for any file on the storage medium that file is saved (main memory or SD) in a hidden directory with binary files created for that purpose. With a similar way it also saves a list of recent files opened for each storage medium. Even switching between Hanlin's and BeBook's firmware you can still read this metadata as they use the same format, but not with LBOOK's or OpenInkpot firmware.

This feature works great on Hanlin/BeBook, it never forgets the last page you read because it's stored on the same storage medium the file is saved at, so in a sense the last pages read go together with the ebook file

so there is no problem even if you regularly change SD cards, provided of course you don't remove the SD cards too quickly after file or pageturn operations.

I have never noticed any problem with shutdown/bootup as well.

I find that the bookmark facility isn't as good as I would like. It bookmarks the page number so it will be wrong if you change the zoom level or change the font. zoom one and zoom 3 are ok as they are the same page number with zoom 3 (landscape) requiring two page changes to change the number. Zoom 2 is my favorite zoom but it can be problematic as the bookmarks will be wrong if they are set at a different zoom. This is also true for remembering the page number if you change the system font. I have forwarded this problem to Jinke.

Dale

05-02-2009, 04:30 AM	#1
rgeorg Guru Posts: 675 Karma: 3314796 Join Date: Mar 2009 Location: Europe & USA Device: K3/3G(2x), Glo HD, Amazon Voyage	A simple question - When turning on the reader... Hi, Sorry if this has been answered somewhere else, but should be a quick answer. Does the Hanlin (any flavor) or the Sony for that matter, pick up from where you left off reading when you turn it on - or does one have to go through the menus to open a specific bookmarked book? In other words, I can close my mp3 player as I am listening to a book. When I turn it on again it starts immediately from where I left off. Does an ebook reader function similarly? I would assume that it does - but you never know Thanks for any assistance!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
erm, simple question , hope for simple answer!	al zymers	Amazon Kindle	5	09-25-2010 01:01 PM
Very Simple Question	dreamhunter	Calibre	2	03-27-2010 05:37 PM
question About Page Turning	93terp	Astak EZReader	4	09-15-2009 05:30 PM
Simple question for a simple mind :)	PKFFW	OpenInkpot	6	08-27-2009 09:00 PM
SIMPLE QUESTION	wrgoodman	Sony Reader	3	09-12-2007 11:04 PM

05-02-2009, 06:22 AM	#2
AlfonsVH Addict Posts: 253 Karma: 2113226 Join Date: Jun 2008 Device: BeBook Neo	You can't immediately return to a book when switching it on, but you can use the key-lock function instead of switching it off. (i.e. short press on the powerbutton) It hardly takes any battery to suspend the reader.

05-02-2009, 07:04 AM	#3
Stitchawl Opsimath Posts: 12,344 Karma: 187123287 Join Date: Mar 2009 Location: Chiang Mai, Northern Thailand Device: Sony PRS-650, iPhone 5, Kobo Glo, Sony PRS-350, iPad, Samsung Galaxy	When I'm reading a book on my Sony 505 and turn off the reader, when I restart it later it will open at the same page that I left off. If I want to read a couple of books at the same time, I simply 'bookmark' the page I'm stopping at, and open another bookmark for a different book. If I'm only reading one book I don't bother to bookmark it. If I have gone back to the main menu before turning off the reader, when I turn it back on there is an option to 'continue reading' for the book I had at log off. Stitchawl

05-02-2009, 07:44 AM	#4
rgeorg Guru Posts: 675 Karma: 3314796 Join Date: Mar 2009 Location: Europe & USA Device: K3/3G(2x), Glo HD, Amazon Voyage	Thanks very much for the info - sounds like both devices handle it one way or another!

05-02-2009, 04:23 PM	#5
Gudy Wizard Posts: 1,154 Karma: 3252017 Join Date: Jan 2008 Location: Germany Device: Pocketbook Touch Lux (623)	The Hanlin remembers the last position when you close a book or shutdown the reader, so when you open the book again, it jumps to that position. It does not automatically open the last book when you start the device, though. Instead, it has a special folder in the root directory which contains the eight most recently opened books. Combine these two features, and it takes no more than two key presses after starting the device to return to the last position for the last eight books you've read. The Hanlin has a very good power save mode, though, so unless you put the device away for a couple of days, you might just as well keep it running or put it into key-lock mode, as AlfonsVH described.

05-03-2009, 05:01 PM	#6
oddity Member Posts: 20 Karma: 10 Join Date: May 2009 Device: BeBook/V3	Hanlin (BeBook) saves the last page read for any file on the storage medium that file is saved (main memory or SD) in a hidden directory with binary files created for that purpose. With a similar way it also saves a list of recent files opened for each storage medium. Even switching between Hanlin's and BeBook's firmware you can still read this metadata as they use the same format, but not with LBOOK's or OpenInkpot firmware. This feature works great on Hanlin/BeBook, it never forgets the last page you read because it's stored on the same storage medium the file is saved at, so in a sense the last pages read go together with the ebook file so there is no problem even if you regularly change SD cards, provided of course you don't remove the SD cards too quickly after file or pageturn operations. I have never noticed any problem with shutdown/bootup as well.

Advert

Advert