Formatted internal memory...what now

swedish11 · 04-20-2009, 08:01 PM

Hi,

Hopefully somebody can help me;
After my cybook file structure became corrupt, i tried to reformat the sd card and the internal memory.

I have tried al sort of ways to reflash, but it seems that the cybook wouldnt want to start the reflash. It just goes to the library and than states no books in library.

Any idea what i need to do? How can i get the file structure back on the internal memory?

Pulp · 04-20-2009, 08:48 PM

You have to copy the file "update_kernel" into the root-folder of the sd card.
When powering up your cybook make sure you keep the centerbutton pressed once the first boot image is shown and don't release it.
Then you will see a new screen explaining that the update is in progress - wait for it to finish and you should be fine.

pjeanetta · 04-21-2009, 04:08 AM

Hi, it looks like Cybook works - so no need to update kernel again.
If I understood correct, his files are gone - well, that's normal if you format something.

You'll need to copy them back (hope you have saved them somewhere).

Pulp · 04-21-2009, 05:44 AM

If the filestructure is gone aswell (what would happen if he formated the internal drive using the pc) he should be able to get it back with a firmwareupdate, hence the instruction

swedish11 · 04-21-2009, 06:54 AM

Thanks for the reply.
It seems that the cybook is working, the problem is cant copy the file structure back on it, and therefore no files in the library.
Also it seems that reflashing is not working, it skips the sd card where i put the kernel on.

Ideas?

Pulp · 04-21-2009, 09:05 AM

Did you follow my instructions in Post #2?

swedish11 · 04-21-2009, 09:36 AM

Yes, i tried to do it the way you and the Bookeen website suggest.
The kernel is in the root of the SD card and when i reboot i hold the centre button. What happens is that it just starts up, just like if when i dont press the button.

Am is missing something obvious? I did flash my cybook before and it worked before.

Pulp · 04-21-2009, 10:08 AM

Wait for the first boot-screen to show up, then press the center button (don't keep it pressed while pressing the powerbutton).

If it still does not wirk you might want to try a differend SD-card.

HarryT · 04-21-2009, 10:12 AM

Are you seeing the "SD" symbol in the lower right corner of the library screen? That indicates that the CyBook is "seeing" the SD card.

HarryT · 04-21-2009, 10:16 AM

To clarify about the reflashing:

As soon as you see the first splash screen (the one with the black background), press the central button of the navigation control AND KEEP IT PRESSED IN until the screen flashes white and enters the firmware update process. You often have to hold it in for 20 seconds or so before it starts the reflash.

Godzil · 04-21-2009, 12:05 PM

By the way which version do you have actually? if it's newer than the 796 you could be unable to install this version...

(and all you can do is contact bookeen, or wait for the nearly_ready_but_no_release_date update that will surely provide a 8??fmt version)

swedish11 · 04-21-2009, 01:45 PM

I can see the 'SD' symbol so that's a good sign. I have tried all possible combinations with the center button. But will shortly try again.

I do have version 820 installed. Could that be the problem? Is the only route to go to contact bookeen?

Godzil · 04-21-2009, 02:40 PM

I'm think it's the only way, does the About say "400Mhz" ? if yes, I don't think that <802 firmware version support them, I'm not sure, but you should contact them, it's the better way to know

crAss · 04-23-2009, 03:08 AM

What file system did you use when you formated the internal memory and the SD card?

04-20-2009, 08:01 PM	#1
swedish11 Junior Member Posts: 5 Karma: 10 Join Date: Apr 2009 Device: cybook	Formatted internal memory...what now Hi, Hopefully somebody can help me; After my cybook file structure became corrupt, i tried to reformat the sd card and the internal memory. I have tried al sort of ways to reflash, but it seems that the cybook wouldnt want to start the reflash. It just goes to the library and than states no books in library. Any idea what i need to do? How can i get the file structure back on the internal memory?

04-21-2009, 05:44 AM	#4
Pulp Palm Addict Posts: 477 Karma: 1001951 Join Date: Aug 2008 Device: Cybook Gen3 [512mb, FW: 1.5]	If the filestructure is gone aswell (what would happen if he formated the internal drive using the pc) he should be able to get it back with a firmwareupdate, hence the instruction Last edited by Pulp; 04-21-2009 at 05:47 AM.

04-21-2009, 12:05 PM	#11
Godzil a pthread?? where? where? Posts: 1,763 Karma: 30462 Join Date: Mar 2009 Location: Somewhere in EU Device: Newton MessagePad 2100, and only this	By the way which version do you have actually? if it's newer than the 796 you could be unable to install this version... (and all you can do is contact bookeen, or wait for the nearly_ready_but_no_release_date update that will surely provide a 8??fmt version) Last edited by Godzil; 04-21-2009 at 12:10 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Now I have internal memory problems on my PP	jusmee	Astak EZReader	6	04-03-2010 07:31 PM
Books on internal memory show as on Memory Stick	doreenjoy	Sony Reader	6	06-05-2009 03:08 AM
Formatted internal memory...what now	swedish11	Bookeen	2	04-21-2009 05:47 AM
Internal Memory	jlbfoot	Sony Reader	3	12-16-2008 05:34 PM
Memory cards and internal memory	Valloric	Sony Reader	30	02-15-2008 06:46 AM

04-20-2009, 08:48 PM	#2
Pulp Palm Addict Posts: 477 Karma: 1001951 Join Date: Aug 2008 Device: Cybook Gen3 [512mb, FW: 1.5]	You have to copy the file "update_kernel" into the root-folder of the sd card. When powering up your cybook make sure you keep the centerbutton pressed once the first boot image is shown and don't release it. Then you will see a new screen explaining that the update is in progress - wait for it to finish and you should be fine.

04-21-2009, 04:08 AM	#3
pjeanetta Junior Member Posts: 7 Karma: 14 Join Date: Feb 2009 Device: CyBook	Hi, it looks like Cybook works - so no need to update kernel again. If I understood correct, his files are gone - well, that's normal if you format something. You'll need to copy them back (hope you have saved them somewhere).

04-21-2009, 06:54 AM	#5
swedish11 Junior Member Posts: 5 Karma: 10 Join Date: Apr 2009 Device: cybook	Thanks for the reply. It seems that the cybook is working, the problem is cant copy the file structure back on it, and therefore no files in the library. Also it seems that reflashing is not working, it skips the sd card where i put the kernel on. Ideas?

04-21-2009, 09:05 AM	#6
Pulp Palm Addict Posts: 477 Karma: 1001951 Join Date: Aug 2008 Device: Cybook Gen3 [512mb, FW: 1.5]	Did you follow my instructions in Post #2?

04-21-2009, 09:36 AM	#7
swedish11 Junior Member Posts: 5 Karma: 10 Join Date: Apr 2009 Device: cybook	Yes, i tried to do it the way you and the Bookeen website suggest. The kernel is in the root of the SD card and when i reboot i hold the centre button. What happens is that it just starts up, just like if when i dont press the button. Am is missing something obvious? I did flash my cybook before and it worked before.

04-21-2009, 10:08 AM	#8
Pulp Palm Addict Posts: 477 Karma: 1001951 Join Date: Aug 2008 Device: Cybook Gen3 [512mb, FW: 1.5]	Wait for the first boot-screen to show up, then press the center button (don't keep it pressed while pressing the powerbutton). If it still does not wirk you might want to try a differend SD-card.

04-21-2009, 10:12 AM	#9
HarryT eBook Enthusiast Posts: 85,544 Karma: 93383043 Join Date: Nov 2006 Location: UK Device: Kindle Oasis 2, iPad Pro 10.5", iPhone 6	Are you seeing the "SD" symbol in the lower right corner of the library screen? That indicates that the CyBook is "seeing" the SD card.

04-21-2009, 10:16 AM	#10
HarryT eBook Enthusiast Posts: 85,544 Karma: 93383043 Join Date: Nov 2006 Location: UK Device: Kindle Oasis 2, iPad Pro 10.5", iPhone 6	To clarify about the reflashing: As soon as you see the first splash screen (the one with the black background), press the central button of the navigation control AND KEEP IT PRESSED IN until the screen flashes white and enters the firmware update process. You often have to hold it in for 20 seconds or so before it starts the reflash.

04-21-2009, 01:45 PM	#12
swedish11 Junior Member Posts: 5 Karma: 10 Join Date: Apr 2009 Device: cybook	I can see the 'SD' symbol so that's a good sign. I have tried all possible combinations with the center button. But will shortly try again. I do have version 820 installed. Could that be the problem? Is the only route to go to contact bookeen?

04-21-2009, 02:40 PM	#13
Godzil a pthread?? where? where? Posts: 1,763 Karma: 30462 Join Date: Mar 2009 Location: Somewhere in EU Device: Newton MessagePad 2100, and only this	I'm think it's the only way, does the About say "400Mhz" ? if yes, I don't think that <802 firmware version support them, I'm not sure, but you should contact them, it's the better way to know

Advert

Advert

04-23-2009, 03:08 AM	#14
crAss Connoisseur Posts: 68 Karma: 20 Join Date: Jan 2009 Location: Athens, Greece Device: Cybook Gen3	What file system did you use when you formated the internal memory and the SD card?