What about LIT files?

scylla2 · 04-13-2009, 10:17 AM

I'm seriously considering buying a BeBook because of its support for ebooks in LIT format. I've gone through the forum here, however, and I've seen very little written about how well the BeBook handles this type of file.

I have a huge collection of ebooks, mainly in the (non-DRM) LIT format. Will I have much trouble with formatting and presentation if they are copied directly to the BeBook without running them through some kind of conversion process first?

Thanks for all replies.

ilovejedd · 04-13-2009, 11:48 AM

I don't have a BeBook but I don't imagine it would have any trouble rendering LIT files. LIT is very easy to render. The actual content is basically HTML, just inside the LIT container.

cvkemp · 04-13-2009, 12:02 PM

I have used calibre to convert my lit books to mobi on my EZ Reader. I did not like the format of the lit books using the EZ Reader. I also reflashed my EZ reader with the bebook firmware and tried the lit and had the same results.
The issue I had was that the print was too small and the line breaks were not correct and I would also have problems with the reader hanging or rebooting. And also neither firmware will read drm lit books.

wallcraft · 04-13-2009, 12:22 PM

There was a review with pictures of almost all the formats on a Hanlin, but it was posted at another site and I can't find it.

For me, only FB2 and MOBI and RTF display well on the Hanlin. The other formats are ok for occasional use but I would probably convert LIT to MOBI if it was my primary format and I used the standard Hanlin firmware. This is easy to do with Calibre, but if you use Calibre's GUI then you will loose any directory hierarchy. Since the GUI does not include the --compress option, it may be better to use the command line any2mobi anyway. Since MOBI is supported by many devices, there is then less reason to go with the Hanlin though.

One advantage of the Hanlin is that you can use OpenInkPot and FBReader, which is what I am doing. I actually have many ebooks in LIT format, and I used "ConvertLIT GUI" to explode them to OEB ebooks which FBReader will read directly (make a zip of the OEB's directory and rename it .oebzip).

cvkemp · 04-13-2009, 05:16 PM

I have tried twice now to flash my EZ Reader with OpenInkPot and both times it hangs on the forth step of the update.
Am I doing something wrong. I followed the instructions and I know the SD card is correct I have been able to flash with the EZ reader .bin and also the BEbook .bin updates.

cvkemp · 04-14-2009, 10:29 PM

Well after reformating the SD card I was finally able to get OI to flash
and I am going to see for myself what I have been reading about it.

Margrete · 04-20-2009, 06:51 AM

Quote:

Originally Posted by scylla2

I'm seriously considering buying a BeBook because of its support for ebooks in LIT format. I've gone through the forum here, however, and I've seen very little written about how well the BeBook handles this type of file.

I have a huge collection of ebooks, mainly in the (non-DRM) LIT format. Will I have much trouble with formatting and presentation if they are copied directly to the BeBook without running them through some kind of conversion process first?

Thanks for all replies.

The only problem I have with reading the LIT format on my hanlin is that I find it reacts slower, takes longer time to load than when I read mobi. format, otherwise it works quite well for me

04-13-2009, 10:17 AM	#1
scylla2 Junior Member Posts: 3 Karma: 10 Join Date: Apr 2009 Device: GEB1150	What about LIT files? I'm seriously considering buying a BeBook because of its support for ebooks in LIT format. I've gone through the forum here, however, and I've seen very little written about how well the BeBook handles this type of file. I have a huge collection of ebooks, mainly in the (non-DRM) LIT format. Will I have much trouble with formatting and presentation if they are copied directly to the BeBook without running them through some kind of conversion process first? Thanks for all replies.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
iPad .Lit files on the iPad	clockworkzombie	Apple Devices	4	09-13-2010 06:51 AM
Reading .lit files from my app	barduck	Calibre	1	06-14-2009 07:33 AM
Lit files?	Jaie	Which one should I buy?	11	02-21-2009 07:52 AM
Errors in .Lit files	shousa	Workshop	17	01-30-2008 08:38 AM
Converting LIT to LRF Woes (or: Trouble with Images in LIT Files)	JEMelby	Sony Reader	0	07-27-2007 09:18 PM

04-13-2009, 11:48 AM	#2
ilovejedd hopeless n00b Posts: 5,110 Karma: 19597086 Join Date: Jan 2009 Location: in the middle of nowhere Device: PW4, PW3, Libra H2O, iPad 10.5, iPad 11, iPad 12.9	I don't have a BeBook but I don't imagine it would have any trouble rendering LIT files. LIT is very easy to render. The actual content is basically HTML, just inside the LIT container.

04-13-2009, 12:02 PM	#3
cvkemp Loving life Posts: 1,430 Karma: 7991496 Join Date: Mar 2009 Location: Hot Springs Village, Arkansas Device: PaperWhite 6 SE, Fire HD8	I have used calibre to convert my lit books to mobi on my EZ Reader. I did not like the format of the lit books using the EZ Reader. I also reflashed my EZ reader with the bebook firmware and tried the lit and had the same results. The issue I had was that the print was too small and the line breaks were not correct and I would also have problems with the reader hanging or rebooting. And also neither firmware will read drm lit books.

04-13-2009, 12:22 PM	#4
wallcraft reader Posts: 6,977 Karma: 5183568 Join Date: Mar 2006 Location: Mississippi, USA Device: Kindle 3, Kobo Glo HD	There was a review with pictures of almost all the formats on a Hanlin, but it was posted at another site and I can't find it. For me, only FB2 and MOBI and RTF display well on the Hanlin. The other formats are ok for occasional use but I would probably convert LIT to MOBI if it was my primary format and I used the standard Hanlin firmware. This is easy to do with Calibre, but if you use Calibre's GUI then you will loose any directory hierarchy. Since the GUI does not include the --compress option, it may be better to use the command line any2mobi anyway. Since MOBI is supported by many devices, there is then less reason to go with the Hanlin though. One advantage of the Hanlin is that you can use OpenInkPot and FBReader, which is what I am doing. I actually have many ebooks in LIT format, and I used "ConvertLIT GUI" to explode them to OEB ebooks which FBReader will read directly (make a zip of the OEB's directory and rename it .oebzip).

04-13-2009, 05:16 PM	#5
cvkemp Loving life Posts: 1,430 Karma: 7991496 Join Date: Mar 2009 Location: Hot Springs Village, Arkansas Device: PaperWhite 6 SE, Fire HD8	I have tried twice now to flash my EZ Reader with OpenInkPot and both times it hangs on the forth step of the update. Am I doing something wrong. I followed the instructions and I know the SD card is correct I have been able to flash with the EZ reader .bin and also the BEbook .bin updates.

04-14-2009, 10:29 PM	#6
cvkemp Loving life Posts: 1,430 Karma: 7991496 Join Date: Mar 2009 Location: Hot Springs Village, Arkansas Device: PaperWhite 6 SE, Fire HD8	Well after reformating the SD card I was finally able to get OI to flash and I am going to see for myself what I have been reading about it.

Advert

Advert