iLiad Scratchbox VNC Server Usage

BTolputt · 02-01-2009, 10:53 PM

I've setup scratchbox in a clean Ubuntu VM (I had to create my own as the VMware image referenced above just crashes in my VMPlayer install). I can now download & compile applications and was one my way to testing one when I found out that the VNC server instructions seemed not to be working.

Is there anyone around who could assist in getting my VNC server up & running for scratchbox/iLiad development purposes. I am looking at building the mtPaint application as it:

Requires minimal system resources
Is available for the debian lenny build (the one the examples seem to come from)
Can utilise the pressure sensitivity of a wacom tablet (and hence hopefully the iLiad's screen)

I've been able to build the "standard" version, but cannot test it (don't want to brick the iLiad before running it at least once in the development VM). Once I have the standard version running, I intend to customise the interface somewhat to make it more user-friendly for the iLiad eInk screen (i.e. less menus, more toggle buttons)

ericshliao · 02-02-2009, 12:55 AM

As to the VNC setup, here is some ref (https://www.mobileread.com/forums/sho...39&postcount=4). It's not complete, but at least works for me.

BTolputt · 02-02-2009, 02:57 AM

Success! Thank you very much... now on to packaging the application and testing it on the iLiad.

I think we are very close to a bitmap-based scribble/art application on the iLiad now. It won't be GIMP, but it will be more than the vector-based scribble application

02-01-2009, 10:53 PM	#1
BTolputt Junior Member Posts: 5 Karma: 10 Join Date: Jan 2009 Device: iLiad	Scratchbox VNC Server Usage I've setup scratchbox in a clean Ubuntu VM (I had to create my own as the VMware image referenced above just crashes in my VMPlayer install). I can now download & compile applications and was one my way to testing one when I found out that the VNC server instructions seemed not to be working. Is there anyone around who could assist in getting my VNC server up & running for scratchbox/iLiad development purposes. I am looking at building the mtPaint application as it: Requires minimal system resources Is available for the debian lenny build (the one the examples seem to come from) Can utilise the pressure sensitivity of a wacom tablet (and hence hopefully the iLiad's screen) I've been able to build the "standard" version, but cannot test it (don't want to brick the iLiad before running it at least once in the development VM). Once I have the standard version running, I intend to customise the interface somewhat to make it more user-friendly for the iLiad eInk screen (i.e. less menus, more toggle buttons)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Non-GUI build for server usage?	nibl	Calibre	3	06-23-2010 02:18 PM
iLiad colinux + scratchbox ?	ericshliao	iRex Developer's Corner	2	01-28-2009 10:18 AM
iLiad Connect to Xfbdev - no vnc	mind	iRex Developer's Corner	14	04-12-2008 11:56 AM
iLiad Scratchbox and app testing	Mythago	iRex Developer's Corner	2	03-28-2007 02:27 PM

02-02-2009, 12:55 AM	#2
ericshliao Guru Posts: 976 Karma: 687 Join Date: Nov 2007 Device: Dell X51v; iLiad v2	As to the VNC setup, here is some ref (https://www.mobileread.com/forums/sho...39&postcount=4). It's not complete, but at least works for me.

02-02-2009, 02:57 AM	#3
BTolputt Junior Member Posts: 5 Karma: 10 Join Date: Jan 2009 Device: iLiad	Success! Thank you very much... now on to packaging the application and testing it on the iLiad. I think we are very close to a bitmap-based scribble/art application on the iLiad now. It won't be GIMP, but it will be more than the vector-based scribble application

Advert