Register Guidelines E-Books Today's Posts Search

Go Back   MobileRead Forums > E-Book Readers > Onyx Boox

Notices

Reply
 
Thread Tools Search this Thread
Old 10-19-2026, 11:36 AM   #1
para15000
Junior Member
para15000 began at the beginning.
 
Posts: 2
Karma: 10
Join Date: Oct 2026
Device: boox poke 4 lite
Poke 4 Lite (QCM2290) stuck on ONYX logo after boot_a flash — only 900E

I soft-bricked my Poke 4 Lite and I'm stuck one step before the fix.

Device: BOOX Poke 4 Lite, Android 11, FW 3.2.4 (2022-09-18), bengal / QCM2290, eMMC, A/B slots, power button only. The QCM2290 firehose loader works (I used it before the brick).

What happened:

adb reboot edl → 9008 worked fine. I dumped the GPT, userdata and boot_a with bkerler/edl.
I flashed a Magisk-patched image to boot_a (edl w boot_a ...). vbmeta_a still has AVB enabled (flags=0), so now it hangs on the ONYX logo forever.
I have the original boot_a.img backed up (and the full v4.0 OTA). I only need to write boot_a back.
Current state:

Holding power: the screen flickers, then ONYX comes back and it hangs again.
On USB it always enumerates as 05c6:900e (QUSB_BULK_SN), never 9008. This happens with or without the EDL cable, and with a normal cable too. Uploading the loader in 900E fails with "Invalid transmission length".
EDL cable (button type, "二代高通工程线 V2.0"): pressing the button while the device is enumerated kills the USB link (error -71), so the short works. I've tried: button held while plugging into a powered-off device; device on + button held + forced reboot with power. Always 900E.
Recovery combo (USB unplugged, hold power until the LED, +7 s, 5 quick presses): no recovery menu.
Next I'm trying a fully drained battery + EDL cable (that worked for someone with a Note Air 5c).
Questions:

Does anyone know the USB_BOOT / EDL test points on the Poke 4 Lite board (a photo would be great)? Or the UART pads?
Is there any way to get from 900E (XBL ramdump Sahara) to 9008, e.g. a Sahara command, or something that makes ABL give up on slot a and fall back to slot b?
What's the correct recovery key combo on the Poke 4 Lite?
Thanks!
para15000 is offline   Reply With Quote
Reply


Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Go 7 attempted root and now stuck on boox logo jd27 Onyx Boox 91 06-28-2026 12:28 AM
Poke 4 Lite or 5? therealTOEBEANS Onyx Boox 3 05-01-2024 10:53 PM
Onyx boox Poke 4 lite, first impression norweger Onyx Boox 0 01-13-2023 07:24 AM
Poke 3 (& Poke 2, other Onyx?) screen light Renate Onyx Boox 35 12-14-2022 08:41 AM
Stuck with a shop logo as wallpaper. Wyre Kobo Reader 7 07-06-2017 12:57 PM


All times are GMT -4. The time now is 06:06 PM.


MobileRead.com is a privately owned, operated and funded community.