PW3 Need Help! Navigate the Diag mode over Serial console

Dra_w · 12-25-2020, 11:36 AM

Hi. During doing some research on the Diag mode of Kindle Paperwhite 3, I try to test the MAD TEST under the Mics Individual diagnostics menu which laterly corrupts the touch driver, unfortunately.

When I try to re access this test mode with my touchscreen not responsible to figure out what happended via serial console as below, I cannot access by typing 'o':
diag> MUSCAT_WFO - System Diags - 100

Code:

   ~~~~  1.1.40.329941  ~~~~
     pcbId:0670709182970F82
(DS INFO)-Device Setting
(TOUCH PLATE)-Touch Plate Test
(OTS)-Operator test suite
(o)-Misc individual diagnostics
(WIFI NART)-nART factory test
(USB EXPORT)-USB device mode
(o)-Reboot or Disable Diags
(POWER SUSPEND)-Lock screen
(X)-Exit
diag>   O: command not found!

Does anyone know how to access the Mics individual diagnostics menu or how to fix the touch firmware corruption as information below:

Code:

ds info
get_input_from_stdin Received [DS INFO]
diag>   MUSCAT_WFO - DS INFO -  51
   ~~~~  1.1.40.329941  ~~~~
     pcbId:0670709182970F82

   Serial Number      :
   PCBA ID            :0670709182970F82
   MAC Address        :B0FC0DCC8D0B
   Manufacturing Code :D0B50D1RXWQJH6BU543C

   VCOM Setting       :-1.87 Volts
   Touch FW version   :Invalid

   EINK Panel ID      :
     E85559D61G060151GEN60F2006037732A

   Waveform version :
     09_09_0088_3c_3c7831_00_04_00001259_85
(X)-Exit

NiLuJe · 12-25-2020, 06:20 PM

Look at the main startup scripts, some of 'em are responsible for flashing the blob.

(Some of that may or may not be hidden behind a feature flag, not that it's relevant since you're probably going to be doing it by hand anyway).

12-25-2020, 11:36 AM	#1
Dra_w Night Owl Posts: 36 Karma: 100000 Join Date: Aug 2013 Device: Kindle 3; Kindle Voyage	Need Help! Navigate the Diag mode over Serial console Hi. During doing some research on the Diag mode of Kindle Paperwhite 3, I try to test the MAD TEST under the Mics Individual diagnostics menu which laterly corrupts the touch driver, unfortunately. When I try to re access this test mode with my touchscreen not responsible to figure out what happended via serial console as below, I cannot access by typing 'o': diag> MUSCAT_WFO - System Diags - 100 Code: ~~~~ 1.1.40.329941 ~~~~ pcbId:0670709182970F82 (DS INFO)-Device Setting (TOUCH PLATE)-Touch Plate Test (OTS)-Operator test suite (o)-Misc individual diagnostics (WIFI NART)-nART factory test (USB EXPORT)-USB device mode (o)-Reboot or Disable Diags (POWER SUSPEND)-Lock screen (X)-Exit diag> O: command not found! Does anyone know how to access the Mics individual diagnostics menu or how to fix the touch firmware corruption as information below: Code: ds info get_input_from_stdin Received [DS INFO] diag> MUSCAT_WFO - DS INFO - 51 ~~~~ 1.1.40.329941 ~~~~ pcbId:0670709182970F82 Serial Number : PCBA ID :0670709182970F82 MAC Address :B0FC0DCC8D0B Manufacturing Code :D0B50D1RXWQJH6BU543C VCOM Setting :-1.87 Volts Touch FW version :Invalid EINK Panel ID : E85559D61G060151GEN60F2006037732A Waveform version : 09_09_0088_3c_3c7831_00_04_00001259_85 (X)-Exit

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Restore to factory default from diag menu (without using serial)	datanoise	Kindle Developer's Corner	4	02-28-2018 11:43 AM
Oasis on 5.8.2 stuck in Diag Mode	picree	Kindle Developer's Corner	41	08-30-2016 05:36 AM
KV serial console	Cex	Kindle Developer's Corner	7	06-29-2016 09:14 AM
Does pw2 have a diag mode like kinde4?	cxy560	Kindle Developer's Corner	1	02-04-2014 03:58 AM
Serial console	BlackRat	iRex	3	02-19-2007 04:35 AM

12-25-2020, 06:20 PM	#2
NiLuJe BLAM! Posts: 13,506 Karma: 26047190 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Look at the main startup scripts, some of 'em are responsible for flashing the blob. (Some of that may or may not be hidden behind a feature flag, not that it's relevant since you're probably going to be doing it by hand anyway).

Advert