Create epub

zkab · 04-17-2016, 07:12 AM

I have a bunch of books in LibreOffice Writer.
They are pretty simple with cover image,no table of contents, text.
Calibre converts them to epub with a lot of typographical errors.
I have tried to convert both from PDF and ODF ...
How can that be done - to edit all the books after the conversion is a huge task.
I run Calibre in Linux.

BetterRed · 04-17-2016, 07:19 AM

@zkab - Save them as DOCX and convert to EPUB, see What are the best source formats to convert?

BR

theducks · 04-17-2016, 11:29 AM

Typographical errors? Your book has charts, Tabular data ('not in Tables')?

EPUB2 is a reflowable format. Those need special (manual) treatments

Indents, spacing... are contolled / overridden by the conversion settings (as seen on the conversion start dialog). Preferences are for the First time conversion only,

zkab · 04-18-2016, 09:24 AM

I saved the book in DOCX-format and converted it to EPUB ... same sad story.
Have a feeling that there is a lot of manually work involved to get it working ... I have to continue with a simple PDF instead of EPUB ...

theducks · 04-18-2016, 11:25 AM

Quote:

Originally Posted by zkab

I saved the book in DOCX-format and converted it to EPUB ... same sad story.
Have a feeling that there is a lot of manually work involved to get it working ... I have to continue with a simple PDF instead of EPUB ...

Why did you avoid answering my first (and only question)?
What type of CONTENT is going amiss?

Or are you simply expecting an exact replica of the LO printed paper output?

MartyTX · 04-18-2016, 11:30 AM

Here's an article about converting LibreOffice to EPUB format: ClickHere

The article provides a download of a fairly complex input document in ODT format to test conversions to EPUB.

I ran the document through calibre conversion (ODT -> EPUB) with good results. Pertaining to calibre, the article said: "Good output, competitive with eLAIX".

Are your books in ODT or ODF format? Does LibreOffice let you open an ODF and "save as" ODT? If so, using LibreOffice for ODF -> ODT and then calibre for ODT -> EPUB might yield the most accurate conversion without a lot of manual tweaking.

BetterRed · 04-18-2016, 06:29 PM

Sounds to me like it might be a fixed layout document, they are often pigs to convert to ePUB. I usually leave them as PDF and maybe tweak with Willus' PDF 'optimiser' tool (its in the PDF forum).

BR

zkab · 04-19-2016, 09:24 AM

Quote:

Originally Posted by theducks

Typographical errors? Your book has charts, Tabular data ('not in Tables')?[/U] only,

My book looks as follows:

Page 1) Cover image
Page 2) Title (only 2 lines of text)
Page 3-5) A couple of text info lines and below an scaled image
Page 6->) The book text

When I convert from .docx and check it with 'E-book viewer' I get following:

Page 1) Cover image
Page 2) Cover image
Page 3) Seems OK
Page 4-5) The images are in wrong places and indents & spacing didn't work
Page 7->) The book text seems more or less OK - also indents & spacing didn't work
Drop Caps gets ugly ...

How can that be fixed ?

BetterRed · 04-19-2016, 09:31 AM

Have you read the manual ==>> Convert Microsoft Word documents

Did you look at the sample document therein?

BR

theducks · 04-19-2016, 10:27 AM

Your cover problem is because Calibre is probably set to Add a cover (and Jacket) and did not detect that there was a 'cover'

In EPUB both the PAGE and the IMAGE must get the Semantics set to cover

IMHO Dropcaps are always iffy once they hit a device (blame those devices for variations on following a CSS). In this case, the Calibre viewer is also a device that does not match the 'Word viewer device'

I use the editor to code for my devices. Yes, the same code does NOT perform as desired on both my Kindle and EZReader. I fine tune for the targets.

If you are targeting the Public, You will need to make versions for each or KISS (very simple layout)

zkab · 04-19-2016, 12:05 PM

OK - I checked the link 'Convert Microsoft Word documents' and as I understand to get the images in proper place on a page is not trivial.
Also Dropcaps is not shown as the should.
That leaves me to stick to PDF since there apparently are so any problems with docx -> ePUB calibre conversion ...

MartyTX · 04-19-2016, 01:25 PM

Quote:

Originally Posted by zkab

That leaves me to stick to PDF since there apparently are so any problems with docx -> ePUB calibre conversion ...

Reference my post of the 18th ...

Do you use the LibreOffice Writer program itself, or do you just have books in LibreOffice Writer format?

FWIW, the conversion I tried in calibre from ODT to EPUB worked quite well.

BetterRed · 04-19-2016, 06:41 PM

@zkab - if you do want further help regarding calibre conversions you will have to frame the request as per this - which is a Sticky at the top of this subforum ==>> How to ask a question about conversion problems

I use calibre to convert upwards of a dozen DOCX's a day to EPUB, many of them originate as PDF's. But if the document has many tables, sidebars, images etc etc - I leave it as PDF. If you want to read the PDF on a small screen (phone, tablet) then have a look at Willus' pdf optimiser, it's in the PDF forum.

If you have access to Word (2007 and up) you could try Toxaris' EpubTools addin - it's in the Workshop forum.

BR

zkab · 04-20-2016, 05:39 AM

OK -thanks

04-17-2016, 07:12 AM	#1
zkab Member Posts: 10 Karma: 10 Join Date: Apr 2016 Device: none	Create epub I have a bunch of books in LibreOffice Writer. They are pretty simple with cover image,no table of contents, text. Calibre converts them to epub with a lot of typographical errors. I have tried to convert both from PDF and ODF ... How can that be done - to edit all the books after the conversion is a huge task. I run Calibre in Linux.

04-18-2016, 11:30 AM	#6
MartyTX Dedicated Posts: 441 Karma: 11279376 Join Date: Jun 2012 Location: Amarillo, TX Device: iPad Mini 1 & 4, Nook ST, Dell 11-3000, iPhone 5s	Here's an article about converting LibreOffice to EPUB format: ClickHere The article provides a download of a fairly complex input document in ODT format to test conversions to EPUB. I ran the document through calibre conversion (ODT -> EPUB) with good results. Pertaining to calibre, the article said: *"Good output, competitive with eLAIX". Are your books in ODT or ODF format? Does LibreOffice let you open an ODF and "save as" ODT? If so, using LibreOffice for ODF -> ODT and then calibre for ODT -> EPUB might yield the most accurate conversion without a lot of manual tweaking. Last edited by MartyTX; 04-18-2016 at 11:57 AM. Reason: Additional comment/question*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unable to create catalog in epub format!	drofart	Calibre	3	02-10-2014 09:14 AM
Could Sigil create both EPUB and KF8?	mncowboy	Sigil	41	01-20-2012 04:48 PM
Txt to Epub: how to create a toc	nestol	Calibre	0	08-09-2010 08:56 PM
Burning question... When will someone create an ePub app?	delphidb96	Kindle Developer's Corner	5	12-25-2009 04:00 PM

04-17-2016, 07:19 AM	#2
BetterRed null operator (he/him) Posts: 21,678 Karma: 29711016 Join Date: Mar 2012 Location: Sydney Australia Device: none	@zkab - Save them as DOCX and convert to EPUB, see What are the best source formats to convert? BR

04-17-2016, 11:29 AM	#3
theducks Well trained by Cats Posts: 30,966 Karma: 60358908 Join Date: Aug 2009 Location: The Central Coast of California Device: Kobo Libra2,Kobo Aura2v1, K4NT(Fixed: New Bat.), Galaxy Tab A	Typographical errors? Your book has charts, Tabular data ('not in Tables')? EPUB2 is a reflowable format. Those need special (manual) treatments Indents, spacing... are contolled / overridden by the conversion settings (as seen on the conversion start dialog). Preferences are for the First time conversion only,

04-18-2016, 09:24 AM	#4
zkab Member Posts: 10 Karma: 10 Join Date: Apr 2016 Device: none	I saved the book in DOCX-format and converted it to EPUB ... same sad story. Have a feeling that there is a lot of manually work involved to get it working ... I have to continue with a simple PDF instead of EPUB ...

04-18-2016, 06:29 PM	#7
BetterRed null operator (he/him) Posts: 21,678 Karma: 29711016 Join Date: Mar 2012 Location: Sydney Australia Device: none	Sounds to me like it might be a fixed layout document, they are often pigs to convert to ePUB. I usually leave them as PDF and maybe tweak with Willus' PDF 'optimiser' tool (its in the PDF forum). BR

04-19-2016, 09:31 AM	#9
BetterRed null operator (he/him) Posts: 21,678 Karma: 29711016 Join Date: Mar 2012 Location: Sydney Australia Device: none	Have you read the manual ==>> Convert Microsoft Word documents Did you look at the sample document therein? BR

04-19-2016, 10:27 AM	#10
theducks Well trained by Cats Posts: 30,966 Karma: 60358908 Join Date: Aug 2009 Location: The Central Coast of California Device: Kobo Libra2,Kobo Aura2v1, K4NT(Fixed: New Bat.), Galaxy Tab A	Your cover problem is because Calibre is probably set to Add a cover (and Jacket) and did not detect that there was a 'cover' In EPUB both the PAGE and the IMAGE must get the Semantics set to cover IMHO Dropcaps are always iffy once they hit a device (blame those devices for variations on following a CSS). In this case, the Calibre viewer is also a device that does not match the 'Word viewer device' I use the editor to code for my devices. Yes, the same code does NOT perform as desired on both my Kindle and EZReader. I fine tune for the targets. If you are targeting the Public, You will need to make versions for each or KISS (very simple layout)

04-19-2016, 12:05 PM	#11
zkab Member Posts: 10 Karma: 10 Join Date: Apr 2016 Device: none	OK - I checked the link 'Convert Microsoft Word documents' and as I understand to get the images in proper place on a page is not trivial. Also Dropcaps is not shown as the should. That leaves me to stick to PDF since there apparently are so any problems with docx -> ePUB calibre conversion ...

04-19-2016, 06:41 PM	#13
BetterRed null operator (he/him) Posts: 21,678 Karma: 29711016 Join Date: Mar 2012 Location: Sydney Australia Device: none	@zkab - if you do want further help regarding calibre conversions you will have to frame the request as per this - which is a Sticky at the top of this subforum ==>> How to ask a question about conversion problems I use calibre to convert upwards of a dozen DOCX's a day to EPUB, many of them originate as PDF's. But if the document has many tables, sidebars, images etc etc - I leave it as PDF. If you want to read the PDF on a small screen (phone, tablet) then have a look at Willus' pdf optimiser, it's in the PDF forum. If you have access to Word (2007 and up) you could try Toxaris' EpubTools addin - it's in the Workshop forum. BR

04-20-2016, 05:39 AM	#14
zkab Member Posts: 10 Karma: 10 Join Date: Apr 2016 Device: none	OK -thanks

Advert

Advert