PRS-500 Converting my Lit to Reader

Warhammer · 07-21-2008, 06:42 PM

I have lit files that I want to convert so they are readable on my PRS-500.

1. I've tried ABC lit to convert it to pdf and then used rastaf to convert the pdf to something readable on the reader. The problem is that rasta is not putting spaces between the words soeverythinglookslikethisanditisunreadable.

2. I've tried converting the files to rtf, which actually looks decent except it will format the word-wrap extremely short to two or three words on a line and then the next line will be full followed by another short line. It continues doing it every other line and just continues on and on and on through the entire document.

So, what program should I use or combination to solve either of these problems. Anything I should look for in settings to avoid the rtf issue or the pdf conversion issue with rasta?

Thanks!

P.S. In the past I've used book designer and it worked good enough to allow me to read several converted books. However I recently got a new PC and do not want to go through the headache of trying to reinstall that beast IF I can help it. If not, then so be it.

Patricia · 07-21-2008, 07:07 PM

I last reinstalled BD in about 15 minutes.
See here:
https://www.mobileread.com/forums/showthread.php?t=11786
and the wiki for advice.

I tend to use BD as it works well on lit files for me. If it's been ok for you then it might ultimately be simplest to reserve an hour, fix a cooling drink, put some soothing music on, and just try installing it.
If you decide to do so, then post any problems and someone will try to help.

wallcraft · 07-21-2008, 08:27 PM

Try using Calibre, see Calibre now includes MS LIT converter: lit2lrf . This uses ConvertLIT.

simond · 07-22-2008, 01:42 AM

Calibre is definitely the easiest way to go

07-21-2008, 06:42 PM	#1
Warhammer Junior Member Posts: 5 Karma: 10 Join Date: Jun 2007 Device: Sony Reader PRS-500	Converting my Lit to Reader I have lit files that I want to convert so they are readable on my PRS-500. 1. I've tried ABC lit to convert it to pdf and then used rastaf to convert the pdf to something readable on the reader. The problem is that rasta is not putting spaces between the words soeverythinglookslikethisanditisunreadable. 2. I've tried converting the files to rtf, which actually looks decent except it will format the word-wrap extremely short to two or three words on a line and then the next line will be full followed by another short line. It continues doing it every other line and just continues on and on and on through the entire document. So, what program should I use or combination to solve either of these problems. Anything I should look for in settings to avoid the rtf issue or the pdf conversion issue with rasta? Thanks! P.S. In the past I've used book designer and it worked good enough to allow me to read several converted books. However I recently got a new PC and do not want to go through the headache of trying to reinstall that beast IF I can help it. If not, then so be it. Last edited by Warhammer; 07-21-2008 at 06:45 PM. Reason: More detailed example attempt.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
converting lit to lrf	Midnight	Calibre	18	07-16-2010 11:22 AM
Problem converting LIT	AprilHare	Calibre	4	08-08-2009 08:20 PM
Problem converting LIT to Sony Reader format.	alophind	Sony Reader	4	08-27-2007 11:31 AM
Converting LIT to LRF Woes (or: Trouble with Images in LIT Files)	JEMelby	Sony Reader	0	07-27-2007 09:18 PM
Need help while converting to .LIT	jungelbobo	Workshop	1	05-03-2006 05:51 AM

07-21-2008, 07:07 PM	#2
Patricia Reader Posts: 11,504 Karma: 8720163 Join Date: May 2007 Location: South Wales, UK Device: Sony PRS-500, PRS-505, Asus EEEpc 4G	I last reinstalled BD in about 15 minutes. See here: https://www.mobileread.com/forums/showthread.php?t=11786 and the wiki for advice. I tend to use BD as it works well on lit files for me. If it's been ok for you then it might ultimately be simplest to reserve an hour, fix a cooling drink, put some soothing music on, and just try installing it. If you decide to do so, then post any problems and someone will try to help.

07-21-2008, 08:27 PM	#3
wallcraft reader Posts: 6,977 Karma: 5183568 Join Date: Mar 2006 Location: Mississippi, USA Device: Kindle 3, Kobo Glo HD	Try using Calibre, see Calibre now includes MS LIT converter: lit2lrf . This uses ConvertLIT.

07-22-2008, 01:42 AM	#4
simond Fanatic Posts: 532 Karma: 1062755 Join Date: Aug 2005 Location: London, UK Device: Kobo Aura One, iPad, iPhone	Calibre is definitely the easiest way to go

Advert