Glo Can't get books from Calibre onto new Kobo Glo

062604 · 07-29-2014, 11:46 AM

My daughter just bought a new Kobo Glo. I have some books on Calibre that I have been trying to put on the device. When it is attached to the computer the books show up as being on the Kobo. However, once unplugged there are no books on the kobo. I have an older Glo and I can put books on it from Calibre just fine. Why wouldn't the new one work too?

Ripplinger · 07-29-2014, 12:14 PM

Oddly enough, that same exact thing happened to me with a new spare Glo I picked up yesterday. The books were definitely on the reader, yet the reader never showed them in the library. I tried logging out of the Kobo account on the reader, then it locked up a short time after and I had to do a soft reset (by just inserting a paperclip in the bottom hole). Once I got logged back into the account (had to go through the setup process again), the books I sideloaded were now visible on the reader. So try logging out and back in, and then the soft reset if that didn't do it.

Now I'm trying to figure out why books aren't being seen in the newly named "Collections" like on my older Glo (but I suspect it has to do with the name change from "My Shelves"). If it means setting up a different plugboard, not sure how that will work between the older Glo which I keep on firmware 2.4.0, and the new Glo that I thought I'd keep on the most current firmware just to see the changes (since I won't really be using it). And have to get rid of a mess of empty collections that syncing added back to the reader.

It only updated to firmware 3.3.0, but there's enough annoyances that I might just give in on the idea of watching new changes and putting 2.4.0 on it also. One really odd thing I noticed is the line spacing is different between firmwares. 3.3.0 claims to set the spacing down to 1.0, yet has more distance between lines than on the 2.4.0 firmware which could only be set manually to 1.225.

062604 · 07-29-2014, 01:15 PM

Signing out and then setting up again seemed to do the trick. Thanks so much!

07-29-2014, 11:46 AM	#1
062604 Junior Member Posts: 6 Karma: 10 Join Date: May 2014 Device: kobo glo	Can't get books from Calibre onto new Kobo Glo My daughter just bought a new Kobo Glo. I have some books on Calibre that I have been trying to put on the device. When it is attached to the computer the books show up as being on the Kobo. However, once unplugged there are no books on the kobo. I have an older Glo and I can put books on it from Calibre just fine. Why wouldn't the new one work too?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kobo Glo - Series Info From Calibre to Kobo	Chris_Snow	Library Management	8	12-10-2015 07:11 AM
Glo Synchronizing my own books between Kobo Glo and Kobo Android	ploum	Kobo Reader	35	01-07-2015 06:28 PM
Glo Kobo glo and calibre 1.25.0 : kobo database version not suported ?	gperrot	Kobo Reader	2	07-13-2014 10:24 AM
Glo Books copied through Calibre not showing in Kobo Glo Library	wake_me	Kobo Reader	8	10-06-2013 08:43 PM
Kobo Glo and Calibre 0.9.16	SlowHnds	Calibre	1	01-25-2013 06:31 PM

07-29-2014, 12:14 PM	#2
Ripplinger 350 Hoarder Posts: 3,574 Karma: 8281267 Join Date: Dec 2010 Location: Midwest USA Device: Sony PRS-350, Kobo Glo & Glo HD, PW2	Oddly enough, that same exact thing happened to me with a new spare Glo I picked up yesterday. The books were definitely on the reader, yet the reader never showed them in the library. I tried logging out of the Kobo account on the reader, then it locked up a short time after and I had to do a soft reset (by just inserting a paperclip in the bottom hole). Once I got logged back into the account (had to go through the setup process again), the books I sideloaded were now visible on the reader. So try logging out and back in, and then the soft reset if that didn't do it. Now I'm trying to figure out why books aren't being seen in the newly named "Collections" like on my older Glo (but I suspect it has to do with the name change from "My Shelves"). If it means setting up a different plugboard, not sure how that will work between the older Glo which I keep on firmware 2.4.0, and the new Glo that I thought I'd keep on the most current firmware just to see the changes (since I won't really be using it). And have to get rid of a mess of empty collections that syncing added back to the reader. It only updated to firmware 3.3.0, but there's enough annoyances that I might just give in on the idea of watching new changes and putting 2.4.0 on it also. One really odd thing I noticed is the line spacing is different between firmwares. 3.3.0 claims to set the spacing down to 1.0, yet has more distance between lines than on the 2.4.0 firmware which could only be set manually to 1.225.

07-29-2014, 01:15 PM	#3
062604 Junior Member Posts: 6 Karma: 10 Join Date: May 2014 Device: kobo glo	Signing out and then setting up again seemed to do the trick. Thanks so much!

Advert