Installed Libprs500. Now Sony software Does not Detect PRS500

Ancalu · 03-10-2008, 09:01 AM

Sorry if this topic is repeated, but I can´t find anything about this.

A few days ago, I installed Libprs500 in my pc. At the final installation Step advise me to uninstall the Sony Driver from Sony Connect Software. Ok , I made that and the Libprs500 works perfect.

But Now everytime I connect the PRS500 to the SonySoftware, Is not detected.

If I uninstall the Libprs500 How Do I restore the automatic detection of the PRS-500 in Connect Software? Or

How Do I reinstall only the Sony Driver (not all the program) ?

Thanks in advance!!

kovidgoyal · 03-10-2008, 12:06 PM

you cant re-install only the driver part of connect. You have to re-install the whole thing, but dont worry, re-installing it doesn't delete any user information.

Ancalu · 03-10-2008, 01:37 PM

Thanks for your help!!

But, there is a little problem. When I start the Connect installation program, It´s says that I have installed a "later version" of Connect Software, so Setup can not continue!!

Any clue of how to "bypass" this limitacion??

Thanks for your help!

kovidgoyal · 03-10-2008, 01:42 PM

download the latest version from the sony website

Ancalu · 03-10-2008, 02:04 PM

Thanks a lot kovidgoyal!!!

I donwloaded the eBook Library form Sony . With that update, I could reinstall and also made an installarion of the Sony USB Driver.

But The PRS was not recognized. I found that when I made the Uninstall of Libprs, somehow, the LibPRSDrivers were not unistalled. I don´t know why, but All I did was to uninstall the drivers manually and everything works PERFECT!.

Thanks for your help!

dragonfly2 · 03-27-2008, 07:33 PM

I am having a similar problem. I installed sony connect and everything worked fine. Then I installed libprs500. Connect still sees the reader but libprs500 doesn't. I uninstalled sony connect, the driver pack and libprs500. I even went to device manager and unistalled the libusb drivers. Then I re-installed libprs500 and its drivers. It still does not see the reader. I could just reinstall the sony connect but I really like the libprs500 program. Is there something I am missing? Any help would be great.

kovidgoyal · 03-27-2008, 08:12 PM

Uninstall everything. Re-boot. In the device manager delete any reader/libusb related entries. Reboot. Install libprs500. Pray.

dragonfly2 · 03-28-2008, 11:20 AM

I followed your instructions kovidgoyal but Libprs500 still doesn't see the reader. I am missing something in the uninstall maybe? After all the uninstalling and re-installing, all the books with the edits I made are still loaded in the Libprs500. Any ideas?

JSWolf · 03-28-2008, 11:25 AM

Do you have the USB driver from Connect or eBook Library still installed? If so, it has to go.

igorsk · 03-28-2008, 11:43 AM

You can have either libusb drivers (for libprs500) or Sony ones (for eBook Library) installed. Can't have both, sorry.

pilotbob · 03-28-2008, 12:19 PM

Quote:

Originally Posted by igorsk

You can have either libusb drivers (for libprs500) or Sony ones (for eBook Library) installed. Can't have both, sorry.

So if you install libprs500 you can't use eBook Library?

BOb

igorsk · 03-28-2008, 12:49 PM

Well, you can install and run both programs, but you can use only one of them to move files to PRS-500 (depending on the drivers installed).

dragonfly2 · 03-28-2008, 02:14 PM

I uninstalled sony connect and its windows driver pack. Then I uninstalled Libprs500 and its drivers. I checked Device Manager and no drivers remained for the sony or libusb so I rebooted the computer and installed Libprs500 again. The new installation of Libprs500 still has the books with the edits I made before but the program does not see the reader - the only icon is the library.

kovidgoyal · 03-28-2008, 02:27 PM

Uninstalling doesn't remove books, during the install process were they any messages about driver installation? You did remember to check the drivers box?

dragonfly2 · 03-28-2008, 02:52 PM

I did check the drivers box for prs 500 when I installed Libprs500 and when I now check the device manager, the libusb is there but the program still doesn't see the reader. When I go into my computer, it doesn't see the reader either. I have Libprs500 0.4.42. Should I download the newest version and try that maybe?

03-10-2008, 09:01 AM	#1
Ancalu Junior Member Posts: 7 Karma: 10 Join Date: Oct 2006 Device: Sony PRS-500	Installed Libprs500. Now Sony software Does not Detect PRS500 Sorry if this topic is repeated, but I can´t find anything about this. A few days ago, I installed Libprs500 in my pc. At the final installation Step advise me to uninstall the Sony Driver from Sony Connect Software. Ok , I made that and the Libprs500 works perfect. But Now everytime I connect the PRS500 to the SonySoftware, Is not detected. If I uninstall the Libprs500 How Do I restore the automatic detection of the PRS-500 in Connect Software? Or How Do I reinstall only the Sony Driver (not all the program) ? Thanks in advance!!

03-10-2008, 02:04 PM	#5
Ancalu Junior Member Posts: 7 Karma: 10 Join Date: Oct 2006 Device: Sony PRS-500	Problem Solved! Thanks a lot kovidgoyal!!! I donwloaded the eBook Library form Sony . With that update, I could reinstall and also made an installarion of the Sony USB Driver. But The PRS was not recognized. I found that when I made the Uninstall of Libprs, somehow, the LibPRSDrivers were not unistalled. I don´t know why, but All I did was to uninstall the drivers manually and everything works PERFECT!. Thanks for your help!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can the sony reader software be installed on two computers?	DarkHaloPrincess	Sony Reader	4	06-14-2010 05:31 PM
PRS-600 Possible to check out library books w/o Sony Reader Software Installed?	45MPHK9	Sony Reader	5	03-27-2010 03:16 PM
PRS-600 Pitfalls in Pre-installed Software	Kevin2960	Sony Reader	8	02-09-2010 08:02 PM
libprs500 Version: 0.4.43 dies and does not detect reader under OSX	mimoviz	Calibre	3	03-28-2008 06:25 PM
Libprs500 doesn't detect reader	edbro	Calibre	4	11-25-2007 06:27 PM

03-10-2008, 12:06 PM	#2
kovidgoyal creator of calibre Posts: 45,265 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	you cant re-install only the driver part of connect. You have to re-install the whole thing, but dont worry, re-installing it doesn't delete any user information.

03-10-2008, 01:37 PM	#3
Ancalu Junior Member Posts: 7 Karma: 10 Join Date: Oct 2006 Device: Sony PRS-500	Thanks for your help!! But, there is a little problem. When I start the Connect installation program, It´s says that I have installed a "later version" of Connect Software, so Setup can not continue!! Any clue of how to "bypass" this limitacion?? Thanks for your help!

03-10-2008, 01:42 PM	#4
kovidgoyal creator of calibre Posts: 45,265 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	download the latest version from the sony website

03-27-2008, 07:33 PM	#6
dragonfly2 Junior Member Posts: 5 Karma: 10 Join Date: Mar 2008 Device: Sony PRS500	I am having a similar problem. I installed sony connect and everything worked fine. Then I installed libprs500. Connect still sees the reader but libprs500 doesn't. I uninstalled sony connect, the driver pack and libprs500. I even went to device manager and unistalled the libusb drivers. Then I re-installed libprs500 and its drivers. It still does not see the reader. I could just reinstall the sony connect but I really like the libprs500 program. Is there something I am missing? Any help would be great.

03-27-2008, 08:12 PM	#7
kovidgoyal creator of calibre Posts: 45,265 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Uninstall everything. Re-boot. In the device manager delete any reader/libusb related entries. Reboot. Install libprs500. Pray.

03-28-2008, 11:20 AM	#8
dragonfly2 Junior Member Posts: 5 Karma: 10 Join Date: Mar 2008 Device: Sony PRS500	I followed your instructions kovidgoyal but Libprs500 still doesn't see the reader. I am missing something in the uninstall maybe? After all the uninstalling and re-installing, all the books with the edits I made are still loaded in the Libprs500. Any ideas?

03-28-2008, 11:25 AM	#9
JSWolf Resident Curmudgeon Posts: 79,492 Karma: 145863170 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	Do you have the USB driver from Connect or eBook Library still installed? If so, it has to go.

03-28-2008, 11:43 AM	#10
igorsk Wizard Posts: 3,442 Karma: 300001 Join Date: Sep 2006 Location: Belgium Device: PRS-500/505/700, Kindle, Cybook Gen3, Words Gear	You can have either libusb drivers (for libprs500) or Sony ones (for eBook Library) installed. Can't have both, sorry.

03-28-2008, 12:49 PM	#12
igorsk Wizard Posts: 3,442 Karma: 300001 Join Date: Sep 2006 Location: Belgium Device: PRS-500/505/700, Kindle, Cybook Gen3, Words Gear	Well, you can install and run both programs, but you can use only one of them to move files to PRS-500 (depending on the drivers installed).

03-28-2008, 02:14 PM	#13
dragonfly2 Junior Member Posts: 5 Karma: 10 Join Date: Mar 2008 Device: Sony PRS500	I uninstalled sony connect and its windows driver pack. Then I uninstalled Libprs500 and its drivers. I checked Device Manager and no drivers remained for the sony or libusb so I rebooted the computer and installed Libprs500 again. The new installation of Libprs500 still has the books with the edits I made before but the program does not see the reader - the only icon is the library.

Advert

Advert

03-28-2008, 02:27 PM	#14
kovidgoyal creator of calibre Posts: 45,265 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Uninstalling doesn't remove books, during the install process were they any messages about driver installation? You did remember to check the drivers box?

03-28-2008, 02:52 PM	#15
dragonfly2 Junior Member Posts: 5 Karma: 10 Join Date: Mar 2008 Device: Sony PRS500	I did check the drivers box for prs 500 when I installed Libprs500 and when I now check the device manager, the libusb is there but the program still doesn't see the reader. When I go into my computer, it doesn't see the reader either. I have Libprs500 0.4.42. Should I download the newest version and try that maybe?