![]() |
#1 |
Fanboy
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 17
Karma: 5410
Join Date: Mar 2013
Location: Toronto, Ontario
Device: kobo Glo, Mini, Aura
|
How to fix a creaky Aura.
A few places along the bezel of my Aura would creak and pop when I held it and moved my fingers around. After trying it out in a Aura sleepcover which I returned, it made the problem worse. Here is a quick solution that solved the problem for me.
I used a super fine hobby brush and painted some crazy glue into the seam around the top edge of the housing. I only applied it in the creaky areas, and very, very sparingly. Give it a quick wipe with your fingers immediately before it begins to dry to keep it smooth. A few minutes to dry and no more creak. The glue dries invisible but I did use a magic eraser to clean off a bit of residue that had a different sheen than the case. Just wanted to put that out there in case it bothered anyone else. |
![]() |
![]() |
![]() |
#2 | |
Addict
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 265
Karma: 89314
Join Date: Nov 2009
Location: Southern Illinois
Device: eSlick, Pocketbook IQ, iPad, Kobo Aura, Kobo Aura ONE
|
Quote:
|
|
![]() |
![]() |
Advert | |
|
![]() |
#3 |
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 1,476
Karma: 14328611
Join Date: May 2009
Location: Tokyo, Japan
Device: Aura, Aura H2O, Kindle PW3
|
Good advice! As fat as I know I don't have a creaky one and I'm not interested in finding out! Ignorance is bliss as they say.
|
![]() |
![]() |
![]() |
#4 |
Connoisseur
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 92
Karma: 999
Join Date: Apr 2013
Location: Reno
Device: Sony PRS-T1; PW1; H2O
|
You're super brave being the first to try glue. I'm glad it fixed it and thanks for the tip.
|
![]() |
![]() |
![]() |
#5 |
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 3,489
Karma: 2914715
Join Date: Jun 2012
Device: kobo touch
|
I don't know how the Aura looks in detail and where exactly you are putting the glue. Depending on the details, and if you plan to make a back-up copy of the internal SD (I guess there is one) you might consider doing this before you apply the glue.
|
![]() |
![]() |
Advert | |
|
![]() |
#6 |
Connoisseur
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 92
Karma: 999
Join Date: Apr 2013
Location: Reno
Device: Sony PRS-T1; PW1; H2O
|
Oh how did I miss your username at first too! Good episode tonight.
|
![]() |
![]() |
![]() |
#7 |
Seriously?
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 529
Karma: 3347562
Join Date: Nov 2010
Device: Kobo Aura HD, Kobo Mini, iWhatever
|
I believe I would choose the noise over a voided warranty.
|
![]() |
![]() |
![]() |
#8 |
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 1,178
Karma: 2431850
Join Date: Sep 2008
Device: IPad Mini 2 Retina
|
I suspect they all creak a little bit, mine certainly does, but not enough to bother me. I would never use glue to fix it - what if you or a service centre needed to remove the back?
|
![]() |
![]() |
![]() |
#9 |
Groupie
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 153
Karma: 216188
Join Date: Jul 2010
Device: Nook Classic, Kobo Touch, Nook Simple Touch, Kobo Aura
|
I was happy with mine. Now I find myself checking for noise by squeezing the edges when I read!!
Wish I has skipped this thread. Mine is not noisy but will be before I am done. |
![]() |
![]() |
![]() |
#10 |
Fanboy
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 17
Karma: 5410
Join Date: Mar 2013
Location: Toronto, Ontario
Device: kobo Glo, Mini, Aura
|
I'm talking a minimal amount of glue here people. I doubt that anyone would be able to tell, I put it on and I can't even see it.
I was not really bothered by the noise mine made either until I put it in and out of the sleep cover a few times it got a lot worse. I've already returned a Glo and they just sent me a refurb with the same problem so I can't be bothered to try that again, but if someone at Kobo did open it I bet the glue would just snap apart because it's just on the surface in the seam. I could be wrong... So I'm not recommending anyone try it themselves just saying that it worked for me. |
![]() |
![]() |
![]() |
#11 |
Connoisseur
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 92
Karma: 999
Join Date: Apr 2013
Location: Reno
Device: Sony PRS-T1; PW1; H2O
|
I would rather choose the glue over having to wait for a new unit if everything else was fine with it.
|
![]() |
![]() |
![]() |
#12 |
Member
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 18
Karma: 6738
Join Date: Aug 2012
Device: Kobo Aura HD
|
For me when I pinch the bezel in the top right corner, it makes a little click sound - as if it's not fully "snapped" in place, even though it's as tight as it's probably ever going to be.
Everywhere else on the bezel is fine. It's really not a big deal to me - especially since I never hold the top part of the bezel when reading. |
![]() |
![]() |
![]() |
#13 | |
Zealot
![]() Posts: 104
Karma: 10
Join Date: Jul 2011
Location: Gētīg
Device: Kobo Aura HD / Kobo Aura ONE
|
Quote:
|
|
![]() |
![]() |
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Aura HD Kobo Aura HD | samhy | Kobo Reader | 13 | 01-02-2014 03:38 PM |
Aura HD Kobo Aura HD | PeterT | Kobo Reader | 937 | 07-29-2013 06:02 PM |
Aura HD Anybody have to return their Aura ? | mr_nihilism | Kobo Reader | 89 | 07-20-2013 04:48 PM |
Kobo Kobo Aura HD | hamlok | Andere Lesegeräte | 89 | 05-24-2013 07:35 AM |
Creaky K3 | holgalee | Amazon Kindle | 6 | 06-04-2012 08:12 PM |