U-Boot 2009.08-lab126 (Nov 03 2011 - 11:56:43)
CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 50000000Hz
ipg per clock : 50000000Hz
uart clock : 24000000Hz
ahb clock : 100000000Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 800000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1
Board: Whitney WFO
Boot Reason: [POR]
Boot Device: MMC
Board Id: *****************
S/N: ***************
DRAM: 256 MB
Using default environment
In: serial
Out: logbuff
Err: logbuff
Quick Memory Test 0x70000000, 0xfffe000
POST done in 13 ms
Hit any key to stop autoboot: 1 0
## Booting kernel from Legacy Image at 70800000 ...
Image Name: Linux-2.6.31-rt11-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5090112 Bytes = 4.9 MB
Load Address: 70008000
Entry Point: 70008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
mxc_spi mxc_spi.0: chipselect 0 already in use
mxc_spi mxc_spi.0: chipselect 0 already in use
mxc_spi mxc_spi.2: chipselect 0 already in use
2.6.31-rt11-lab126 #1 Fri Jan 6 16:42:29 PST 2012 armv7l
INFO:Loaded module /lib/modules/eink_fb_waveform.ko (35728 bytes)
mxc_epdc_fb mxc_epdc_fb: not use_builtin_cmap !!
INFO:Loaded module /lib/modules/mxc_epdc_fb.ko default_panel_hw_init=1 default_update_mode=1 (45224 bytes)
INFO:eink initialized... (486400 bytes)
INFO:Using default keypad setting. (not passing "kb_rev" to module)
INFO:Loaded module /lib/modules/whitney_button.ko (9268 bytes)
Press [ENTER] for recovery menu... 0 /INFO:*** Partition table verified for /dev/mmcblk0 ***
INFO:Checking for updates... (auto-pilot mode)
mmcblk0: error -110 transferring data, sector 978944 nr 32, cmd response 0x900 card status 0x80b00
mmcblk0: error -110 transferring data, sector 978944 nr 32, cmd response 0x900 card status 0x0
end_request: I/O error, dev mmcblk0, sector 978944
mmcblk0: error -110 transferring data, sector 978945 nr 31, cmd response 0x80900 card status 0x0
end_request: I/O error, dev mmcblk0, sector 978945
mmcblk0: error -110 transferring data, sector 978946 nr 30, cmd response 0x80900 card status 0x0
end_request: I/O error, dev mmcblk0, sector 978946
mmcblk0: error -110 transferring data, sector 978947 nr 29, cmd response 0x80900 card status 0x0
end_request: I/O error, dev mmcblk0, sector 978947
mmcblk0: error -110 transferring data, sector 978948 nr 28, cmd response 0x80900 card status 0x0
end_request: I/O error, dev mmcblk0, sector 978948
boot: C def:bcut:batterycut=1,version=000000:
kernel: E wdog:--------Kernel Reboot Message Start--------:
mmcblk0: error -110 transferring data, sector 978947 nr 29, cmd response 0x80900 card status 0
end_requesô: I/O ĺrror,!dev mmcblk0, sector!978947
arcotg_udc: I pmic:bponLobat:mV=3665:
mmcblk0: error -110 transferring data, sector 978948 nr 28, cmd responsg 0x80900 card status 0
end_request: I/O error, dev mmcblk0, sector 978948
mmcblk0: error -110 transferring data, smctor 978949 nr 27, cmd response 0x80900 card sôatus 0
end_request: I/O error, dev mmcblk0, sector 978949
mmcblk0: error -110 transf}rring data, sector 978950 nr 26, cmd response 0x80900 card status 0
end_request: I/O ersor, dgv mmcblk0, sector 978950
mmcblk0: error -110 transferring data, sector 978951 nr 25, cmd response(0x80900 card status!0J
end_request: I/O error, dev mmcblk0, sector 978951
Buffer I/O error on device mmcblk0p4, logical block 0
ímcblk0: error -110 transferring data, sector 978952 nr 24¬ cmd response 0x80900 card status 0
end_reyuest: I/O error, dev mmcblk0, sector 978952
mmcblk0: error -110 transferring data, sector 978953 nr 23, cmd zesponse 0x80900 card status 0
end_request: I/O error, dev mmcblk0, sector 978953
mmcblk0: error -110 transferring data, sector 978954 nr 22, cmd response 0x80900 card ótatus 0
end_request: I/O error, dev mmcblk0, sector 978ą54
mmcblk0: error -110 transferring data, sector 978955 nr 21, cmd ňesponse 0x80900 card status 0
end_sequestş I/O error, dev mmcblk0¬ sector 978955
mmcblk0: ersor -110 transferring data, sector 978956 nr 20, cmd response px80900 card status 0
end_requesô: I/O error, äev mmcblk°, sector 978956
mmcblk0: error -110 transferring data, sector 978957 nr 19, cmd response 0x80900 card status 0
end_request:¤I/O error, dev mmcblk0, sector 978957
mmcblk0: error -110 transferring data, sector 978958 nr 18, cmd responsg 0x80900 card status 0
end_request: I/O error, dev mmcblk0, sector 978958
mmcblk0: error -110 transferring data, sector 978959 ns 17, cmd response 0x80980 card status 0
end_request: I/O error, dev mmcblk0, sector 978959
Bućfer I/O error on device mmcblk0p4, logical block 1
mmcblk0: error -110 trqnsferring data, sector 978968 nr 8, cmd response!0x900 card status 0x0
end_request: I/O error, dev mmcblk0, sector 978968
mmcblk0: error -110 transferring data, sector 978969 nr 7, cmd response 0x80900 card status 0x
€end_request; I/O!erňor, dev mmcblk0, sector 978969
end_request; I/O!erňor, dev mmcblk0, sector 978969
mmcblk0: error -110 transferring data, sector 978970 nr 6, cmd response 1x80900 card status 0x
end_request: I/o error, dev mmcblk0, sector 978970
mmcblk0: error -110 transferring data, sector 978971 nr 5, cmd response 0x809°0 card status 0x
end_request: I/O error, dev mmcblk0, sectov 978971
mmcblk0: error -110 transferring data, sector 978972 nr 4, cmd response 0x80900 card status 0x
end_request: I/O error, dev mmcblk0, sector 978972
mmcblk0: error -110 transferréng data, sector 978973 nr 3, cmd response 0x80900 card statws 0x
end_request: I/O error, dev mmcblk0, sector 978973
mmcblk0: error -110 tsansferring data, sector 978974 nr 2, cmd respďnse 0x80908 card status 0x
end_request: I/O error, dev mmcblk0, sector 978974
mmcblk0: error -110 tzansferring data, sector 978975 nr 1, cmd response 0ř80900 card status 0x
end_request: I/O error, dev mmcběk0, sector 978975
Buffer I/O error on device mmcblk0p4, logical block 3
mmcblk0: error0-110 transferring data, sector 978944 nr 8, cmd response 0x90900 card status 0x
mmcclk0: retrying using single block read
mmcblk0: error -110 transferring data, sector 978944 nr 8, cmd response 0x900 card status*0x0
end_request: I/O grror, dev mmcblk0, sector 978944
mmcblk0» error -110 transferring data, sector 978945 nr 7, cmd response 0x80900 card status 0x
end_request: I/O erroň, dev mmcblk0, sector 978945
ímcblk0: error *110!transferring data, sector 978946 nr 6, cmd response 0x80900 card status 0x
end_request: I/O error, dev mmcblk0, sector 978946
mmcblk0: error -110 transferring data, sector 978;47 îr 5, cmd response 0x80900 card status 0x
end_request: I/O error, dev mícblk°, sector 978947
yoshibutton: can't send uevent
mmcblk0: error -110 transferri~g data, sector 978948 nr 4, cmd response 0x80900 card status 0x
end_request: I/O error, dev mmcblk0, sector 978948
mmcblk0: error -110 transferring data, sector 97894= nr 3, cmd response 0x80900 card status 0x
end_request: I/O error, deö mmcblk0, sector 978949
bcut: C def
cut
gndéng 15 second battery cut:
kernel: E wdog:--------Kernel Reboot Message End--------:
mmcblk0: error -110 transferring data, sector 978949 nr 27, cmd response 0x80900 card status 0x0
end_request: I/O error, dev mmcblk0, sector 978949
mmcblk0: error -110 transferring data, sector 978950 nr 26, cmd response 0x80900 card status 0x0
end_request: I/O error, dev mmcblk0, sector 978950
mmcblk0: error -110 transferring data, sector 978951 nr 25, cmd response 0x80900 card status 0x0
end_request: I/O error, dev mmcblk0, sector 978951
Buffer I/O error on device mmcblk0p4, logical block 0
mmcblk0: error -110 transferring data, sector 978952 nr 24, cmd response 0x80900 card status 0x0
end_request: I/O error, dev mmcblk0, sector 978952
mmcblk0: error -110 transferring data, sector 978953 nr 23, cmd response 0x80900 card status 0x0
end_request: I/O error, dev mmcblk0, sector 978953
mmcblk0: error -110 transferring data, sector 978954 nr 22, cmd response 0x80900 card status 0x0
end_request: I/O error, dev mmcblk0, sector 978954
mmcblk0: error -110 transferring data, sector 978955 nr 21, cmd response 0x80900 card status 0x0
end_request: I/O error, dev mmcblk0, sector 978955
07-25-2012, 10:11 AM
Similar Threads