Kindle Touch (Keeping last page on the screen)

Ehhh · 02-21-2012, 08:17 AM

Goal: The main idea is to keep last page on the screen instead of screensaver, when the Kindle Touch goes in sleep mode. It is very usefull, when to keep some notes, culinary books, sheet of music.
How to install:
Firstly, the GUI Launcher application is needed on Kindle Touch. Secondly, to unpack screensaver.tar.gz archive and to copy it to /mnt/us/extensions/ . The Submenu Scrensavers appears in menu Launcher with two commands Enable, Disable. A new file list_modules will appear after clicking on Enable/Disable in the directory /mnt/us/extensions/screensaver/bin. The file list_modules contains the list loaded modules in KT. The script load/unloads only standart screensaver and ad_screensaver modules. And if the KT uses another screensavers, it easly to extend the script screensaver.sh.

waiting comments...

giorgio130 · 02-21-2012, 09:29 AM

I think Yifan Lu's screensaver hack can already do this.

Ehhh · 02-21-2012, 09:44 AM

The current scripts can load/unload scrensaver/ad_screensavers modules only.

yahwing · 02-21-2012, 08:51 PM

When I select "Disable" and then press the power button, the Screen Saver appear, instead of the last page, why? It seems doesn't work!

Ehhh · 02-22-2012, 04:45 AM

Thank you for testing it.. In my kindle it works well, this script unloads only screensaver and ad_screensaver modules. Do you have custom_sreensaver??? Could you run blanket.bin script in the terminal. It printf loaded modules in Kindle Touch, and gives result here. And i will fix ASAP.

MatzeMatz · 02-22-2012, 05:39 AM

You can enable / disable the screensaver easily without unloading any module.
Disable Screensaver:

Code:

lipc-set-prop com.lab126.powerd preventScreenSaver 1

Enable Screensaver:

Code:

lipc-set-prop com.lab126.powerd preventScreenSaver 0

There already exists a disable script "ds.sh" in /usr/bin which contains just the above line.
Add a corresponding enable script, add both (or the direct calls) to the GUI launcher or enable them as command for the "search field" and you're finished...

Easy - and no need to load / unload modules

MatzeMatz · 02-22-2012, 05:45 AM

Addition: after disabling the screensaver, the power button doesn't show the screensaver and also doesn't block the input!
So screen touches still lead to an reaction...
(until you re-enable the screensaver)

Ehhh · 02-22-2012, 06:19 AM

It depends on what goal of task. Kindle Touch are still alive and doesn't go to sleep mode by using "lipc-set-prop com.lab126.powerd preventScreenSaver 1" . But when to unload modules, KT goes to sleep mode and safes battery.

yahwing · 02-22-2012, 08:25 PM

Quote:

Originally Posted by Ehhh

Thank you for testing it.. In my kindle it works well, this script unloads only screensaver and ad_screensaver modules. Do you have custom_sreensaver??? Could you run blanket.bin script in the terminal. It printf loaded modules in Kindle Touch, and gives result here. And i will fix ASAP.

I find the reason and I fix it myself. The reason is that my KT only have ad_screensaver. Thank you very much for your script, it's very useful to me.

yahwing · 02-22-2012, 09:08 PM

Why I can't find the file list_modules?

Ehhh · 02-23-2012, 04:37 AM

I updated a new version of screensaver.tar.gz archive yesterday . It will create a list_modules file.

yahwing · 02-23-2012, 07:31 AM

Quote:

Originally Posted by Ehhh

I updated a new version of screensaver.tar.gz archive yesterday . It will create a list_modules file.

I use your new version today, but I can't find it.

Ehhh · 02-23-2012, 08:20 AM

Quote:

Originally Posted by yahwing

I use your new version today, but I can't find it.

Thank you for your testing it. I've just fixed and updated archive.

yahwing · 02-23-2012, 09:43 AM

I just see your script, and I think your script still have problem. The last echo to the file didn't modify, it should be " echo $MODULE_LIST > $LIST_PATH/list_modules "

yahwing · 02-23-2012, 09:56 AM

And I still have a problem, the battery goes down quickly when my KT goes to sleep, I don't know whether it is caused by your script.

02-22-2012, 05:39 AM	#6
MatzeMatz Enthusiast Posts: 29 Karma: 10 Join Date: Dec 2011 Device: Kindle Touch	You can enable / disable the screensaver easily without unloading any module. Disable Screensaver: Code: lipc-set-prop com.lab126.powerd preventScreenSaver 1 Enable Screensaver: Code: lipc-set-prop com.lab126.powerd preventScreenSaver 0 There already exists a disable script "ds.sh" in /usr/bin which contains just the above line. Add a corresponding enable script, add both (or the direct calls) to the GUI launcher or enable them as command for the "search field" and you're finished... Easy - and no need to load / unload modules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Touch The Touch Screen page turning is annoying!	RealAct	Barnes & Noble NOOK	22	07-23-2013 04:17 AM
page buttons on kindle touch?	bluerfoot	Amazon Kindle	21	12-14-2011 05:08 PM
Kindle Touch - How to highlight to next page?	robertpolson	Amazon Kindle	3	11-24-2011 07:55 PM
Classic Touch Screen Page Turner	Pomtroll	Barnes & Noble NOOK	30	10-15-2010 12:50 PM
Keylock keeping current page - not showing screensaver?	guiyoforward	Amazon Kindle	8	10-13-2010 06:44 PM

02-21-2012, 09:29 AM	#2
giorgio130 Time Waster Posts: 422 Karma: 289160 Join Date: May 2011 Device: Kobo Glo and Aura HD	I think Yifan Lu's screensaver hack can already do this.

02-21-2012, 09:44 AM	#3
Ehhh Connoisseur Posts: 73 Karma: 7140 Join Date: Feb 2012 Device: Kindle Touch	The current scripts can load/unload scrensaver/ad_screensavers modules only.

02-21-2012, 08:51 PM	#4
yahwing Enthusiast Posts: 26 Karma: 10 Join Date: Feb 2012 Device: Kindle Touch	When I select "Disable" and then press the power button, the Screen Saver appear, instead of the last page, why? It seems doesn't work!

02-22-2012, 05:45 AM	#7
MatzeMatz Enthusiast Posts: 29 Karma: 10 Join Date: Dec 2011 Device: Kindle Touch	Addition: after disabling the screensaver, the power button doesn't show the screensaver and also doesn't block the input! So screen touches still lead to an reaction... (until you re-enable the screensaver)

02-22-2012, 06:19 AM	#8
Ehhh Connoisseur Posts: 73 Karma: 7140 Join Date: Feb 2012 Device: Kindle Touch	It depends on what goal of task. Kindle Touch are still alive and doesn't go to sleep mode by using "lipc-set-prop com.lab126.powerd preventScreenSaver 1" . But when to unload modules, KT goes to sleep mode and safes battery.

02-22-2012, 09:08 PM	#10
yahwing Enthusiast Posts: 26 Karma: 10 Join Date: Feb 2012 Device: Kindle Touch	Why I can't find the file list_modules?

02-23-2012, 04:37 AM	#11
Ehhh Connoisseur Posts: 73 Karma: 7140 Join Date: Feb 2012 Device: Kindle Touch	I updated a new version of screensaver.tar.gz archive yesterday . It will create a list_modules file.

02-23-2012, 09:43 AM	#14
yahwing Enthusiast Posts: 26 Karma: 10 Join Date: Feb 2012 Device: Kindle Touch	I just see your script, and I think your script still have problem. The last echo to the file didn't modify, it should be " echo $MODULE_LIST > $LIST_PATH/list_modules "

02-23-2012, 09:56 AM	#15
yahwing Enthusiast Posts: 26 Karma: 10 Join Date: Feb 2012 Device: Kindle Touch	And I still have a problem, the battery goes down quickly when my KT goes to sleep, I don't know whether it is caused by your script.

Advert

Advert