calibre server question

Chauncey · 11-02-2011, 07:21 AM

I have had the calibre server working for me for over a year using a Dyndns web-hop. Then all of a sudden it stopped working, took me over a week to look at the cabling ( the office was repainted during a weekend ). The network now appears to be working correctly I can access the calibre server from any computer on the network, but not through the internet.

I am not really sure where the problem is.

So my question is If I know the ip address of my router is 189.38.133.XXX
Should I not be able to access the calibre server from the internet by typing in the address bar of the browser 189.38.133.XXX:8080

Chauncey

Cdesja5 · 11-02-2011, 07:47 AM

format is: http://xxx.xxx.x.xxx:80xx/stanza
check your port is correct in Calibre preferences in the Sharing over the Net icon.
Also my IP regularly changes the last 3 digits so what used to work before sometimes needs to be adjusted (the last 3 digits of the IP)

PeterT · 11-02-2011, 07:53 AM

On the router you DO need to have arranged to port forward the port you show (8080) to your PC.

theducks · 11-02-2011, 08:10 AM

I will assume that you used the Servers Name (yes that can work with some routers) from the internal LAN

Port forwarding was probably set to a previous internal IP .
When the painters stopped the connection for a long time, the server got a new IP assignment and the port forward is obsolete (or going to the wrong system that goes

)

1) best to set up your router to reserve a specific IP whenever it sees the server machine attach. If reservation is not possible. assign a Static IP, Subnet mask, DNS server to that system (reserved is the easy way

)
2)match the port forward to the reservation IP

Chauncey · 11-02-2011, 08:47 AM

Ok... LOL while I was waiting for a reply... and they were pretty fast... I tried changing the default gateway on the server computer.... Mistake I no longer have internet connection with this machine so any additional work will have to wait until tomorrow (national holiday in Brasil).

However the port forwarding is set up, and a static address is assigned.

Damn, LOL really wish I hadn't tried changing the default gateway because I want to say that any computer on the lan can access the calibre server with the web-hop address. I really belive this because I would not have felt the porblem solved without checking the web-hop address.

Aw well it waits till tomorrow.... thanks for your replies

Chauncey

ilovejedd · 11-03-2011, 02:57 PM

Quote:

Originally Posted by Chauncey

Damn, LOL really wish I hadn't tried changing the default gateway because I want to say that any computer on the lan can access the calibre server with the web-hop address. I really belive this because I would not have felt the porblem solved without checking the web-hop address.

By any chance, do you have URL masking enabled in webhop? If so disable it.

11-02-2011, 07:21 AM	#1
Chauncey Member Posts: 15 Karma: 10 Join Date: Oct 2009 Location: Brasil Device: ETI-2	calibre server question I have had the calibre server working for me for over a year using a Dyndns web-hop. Then all of a sudden it stopped working, took me over a week to look at the cabling ( the office was repainted during a weekend ). The network now appears to be working correctly I can access the calibre server from any computer on the network, but not through the internet. I am not really sure where the problem is. So my question is If I know the ip address of my router is 189.38.133.XXX Should I not be able to access the calibre server from the internet by typing in the address bar of the browser 189.38.133.XXX:8080 Chauncey

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Old Thread] Android FBreader and Calibre OPDS server question	kalex	Calibre	5	12-24-2015 10:16 PM
Calibre Content Server and Windows Home Server 2011	HughMcC	Calibre	8	10-01-2014 07:26 AM
Calibre-server port not open issue on Fedora server	stueyboy	Devices	0	08-17-2011 04:57 PM
Question for 950 owner(s) - re: Calibre server	DigitalAutoPilot	Sony Reader	3	11-02-2010 11:44 AM
Content server question	EvilWayz	Calibre	5	08-14-2010 05:40 PM

11-02-2011, 07:47 AM	#2
Cdesja5 Wizard Posts: 1,117 Karma: 2094306 Join Date: Oct 2011 Location: Montreal, Canada Device: Lots and lots of electronic gadgets...	format is: http://xxx.xxx.x.xxx:80xx/stanza check your port is correct in Calibre preferences in the Sharing over the Net icon. Also my IP regularly changes the last 3 digits so what used to work before sometimes needs to be adjusted (the last 3 digits of the IP)

11-02-2011, 07:53 AM	#3
PeterT Grand Sorcerer Posts: 13,345 Karma: 78876004 Join Date: Nov 2007 Location: Toronto Device: Libra H2O, Libra Colour	On the router you DO need to have arranged to port forward the port you show (8080) to your PC.

11-02-2011, 08:10 AM	#4
theducks Well trained by Cats Posts: 30,923 Karma: 60358908 Join Date: Aug 2009 Location: The Central Coast of California Device: Kobo Libra2,Kobo Aura2v1, K4NT(Fixed: New Bat.), Galaxy Tab A	I will assume that you used the Servers Name (yes that can work with some routers) from the internal LAN Port forwarding was probably set to a previous internal IP . When the painters stopped the connection for a long time, the server got a new IP assignment and the port forward is obsolete (or going to the wrong system that goes ) 1) best to set up your router to reserve a specific IP whenever it sees the server machine attach. If reservation is not possible. assign a Static IP, Subnet mask, DNS server to that system (reserved is the easy way ) 2)match the port forward to the reservation IP

11-02-2011, 08:47 AM	#5
Chauncey Member Posts: 15 Karma: 10 Join Date: Oct 2009 Location: Brasil Device: ETI-2	Ok... LOL while I was waiting for a reply... and they were pretty fast... I tried changing the default gateway on the server computer.... Mistake I no longer have internet connection with this machine so any additional work will have to wait until tomorrow (national holiday in Brasil). However the port forwarding is set up, and a static address is assigned. Damn, LOL really wish I hadn't tried changing the default gateway because I want to say that any computer on the lan can access the calibre server with the web-hop address. I really belive this because I would not have felt the porblem solved without checking the web-hop address. Aw well it waits till tomorrow.... thanks for your replies Chauncey

Advert

Advert