"Not Responding" after I plug in my nook

drawltx · 12-29-2010, 02:10 AM

I think I have upgraded to nook firmware 1.5 and Calibre 0.7.35 since my last sync. Calibre recognizes my nook when I plug it in, but if i try to do any navigation in Calibre I get a "Not Responding" in the window title bar. If I wait 60-90 seconds Calibre returns to life and performs the action that I had requested. A next request causes the "Not Responding" message to reappear and the software locks up for another 60-90 seconds. I can eventually get a book transferred to the nook, but it takes several minutes. Any suggestions of what I might have going on? Running Win7, 32 bit.

Thanks,
drawltx

kovidgoyal · 12-29-2010, 12:08 PM

check your antivirus settings.

ChuckG · 12-29-2010, 01:56 PM

I am seeing the exact same issue, except with a Kindle 3. I maintain my Calibre library on a NAS device, and an earlier thread mentioned that the 'on device' field for each e-book was updated each time the Kindle was attached or an e-book transferred. It seems the network overhead may cause the 'Not Responding' issue as Calibre is updating each e-book.

Does any of this match your configuration?

drawltx · 12-30-2010, 12:15 AM

My libraries are also on a NAS device. The problem does not happen just when I first connect my nook, though. It persists as long as I have the nook attached. Even if I don't transfer any files to the nook, I still get the "not responding" issue. I can convert formats, I can edit metadata without issue.

With regards to antivirus settings, I'm not sure which ones might be causing issues so I turned the whole thing off. The behavior was unchanged. I turned off the Windows Firewall and the behavior was unchanged.

I don't transfer that many books, so if a solution doesn't present itself, I'll just put up with the long waits.

Thanks,
drawltx

ChuckG · 12-31-2010, 07:05 AM

I moved my library to my local machine to eliminate the NAS as the problem. Everything worked fine after doing that, so having the library on the NAS definitely causes this issue.

I saw some posts about having the library in one location and the database in a different location. I might try this next, but it requires setting some environmental variables since it can't be done through the configuration dialog.

itimpi · 12-31-2010, 07:11 AM

Look for the portable.bat file in the Resources sub-folder of the Calibre install location. That should show how to do what you want.

drawltx · 12-31-2010, 02:23 PM

Quote:

Originally Posted by itimpi

Look for the portable.bat file in the Resources sub-folder of the Calibre install location. That should show how to do what you want.

itimpi -

Thanks! I took a quick look and it seems to be what I need. I will give it a try this weekend and post my results. I appreciate the direction.

drawltx

drawltx · 12-31-2010, 09:37 PM

Quote:

Originally Posted by drawltx

itimpi -

Thanks! I took a quick look and it seems to be what I need. I will give it a try this weekend and post my results. I appreciate the direction.

drawltx

Took a closer look and it doesn't look like this will support multiple libraries. It looks like calibre looks for the file metadata.db for the library in the library. As I understand it, the batch file is telling it to look in a specific directory (local) for the metadata file. This works as long as there is a single library - but multiple libraries on the network can't share the same metadata.db file in the local directory.

Interestingly, I think my libraries have been on the network for a long time and I am just now seeing the long wait times.

Not sure which direction I will head next. I'm really trying to use my network to store data - music/photos/books - so that I can get to it from whatever device I happen to be hooking in with - so I'm hesitant to move the libraries to a single machine. Thanks for the assistance, though.

Thanks,
Dick

kovidgoyal · 12-31-2010, 11:30 PM

why don't you use the calibre content server

12-29-2010, 02:10 AM	#1
drawltx Junior Member Posts: 5 Karma: 10 Join Date: Dec 2010 Device: nook	"Not Responding" after I plug in my nook I think I have upgraded to nook firmware 1.5 and Calibre 0.7.35 since my last sync. Calibre recognizes my nook when I plug it in, but if i try to do any navigation in Calibre I get a "Not Responding" in the window title bar. If I wait 60-90 seconds Calibre returns to life and performs the action that I had requested. A next request causes the "Not Responding" message to reappear and the software locks up for another 60-90 seconds. I can eventually get a book transferred to the nook, but it takes several minutes. Any suggestions of what I might have going on? Running Win7, 32 bit. Thanks, drawltx

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"The Shameless Promotion and Endless Plug-Your-Novel Thread"	Dr. Drib	Self-Promotions by Authors and Publishers	3162	04-13-2025 11:50 AM
ATT: Nearly 900K "Connected Devices" Activated (Kindle, Nook)	kjk	News	2	07-23-2010 11:11 AM
Classic Wi-Fi-Only Nook "Lite" Coming Soon, Nook 2 To Follow	abjdiat	Barnes & Noble NOOK	12	04-22-2010 11:15 AM
Great Experience with Sony Support....fixed my "not responding" issue	DougFNJ	Sony Reader	0	11-12-2009 02:42 PM
Installing "Send to Palm" plug-in in Adobe Reader 6?	daught	Reading and Management	8	06-02-2003 06:15 PM

12-29-2010, 12:08 PM	#2
kovidgoyal creator of calibre Posts: 45,149 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	check your antivirus settings.

12-29-2010, 01:56 PM	#3
ChuckG Junior Member Posts: 3 Karma: 10 Join Date: Dec 2010 Device: Kindle 3	I am seeing the exact same issue, except with a Kindle 3. I maintain my Calibre library on a NAS device, and an earlier thread mentioned that the 'on device' field for each e-book was updated each time the Kindle was attached or an e-book transferred. It seems the network overhead may cause the 'Not Responding' issue as Calibre is updating each e-book. Does any of this match your configuration?

12-30-2010, 12:15 AM	#4
drawltx Junior Member Posts: 5 Karma: 10 Join Date: Dec 2010 Device: nook	My libraries are also on a NAS device. The problem does not happen just when I first connect my nook, though. It persists as long as I have the nook attached. Even if I don't transfer any files to the nook, I still get the "not responding" issue. I can convert formats, I can edit metadata without issue. With regards to antivirus settings, I'm not sure which ones might be causing issues so I turned the whole thing off. The behavior was unchanged. I turned off the Windows Firewall and the behavior was unchanged. I don't transfer that many books, so if a solution doesn't present itself, I'll just put up with the long waits. Thanks, drawltx

12-31-2010, 07:05 AM	#5
ChuckG Junior Member Posts: 3 Karma: 10 Join Date: Dec 2010 Device: Kindle 3	I moved my library to my local machine to eliminate the NAS as the problem. Everything worked fine after doing that, so having the library on the NAS definitely causes this issue. I saw some posts about having the library in one location and the database in a different location. I might try this next, but it requires setting some environmental variables since it can't be done through the configuration dialog.

12-31-2010, 07:11 AM	#6
itimpi Wizard Posts: 4,553 Karma: 950151 Join Date: Nov 2008 Device: Sony PRS-950, iphone/ipad (Marvin/iBooks/QuickReader)	Look for the portable.bat file in the Resources sub-folder of the Calibre install location. That should show how to do what you want.

12-31-2010, 11:30 PM	#9
kovidgoyal creator of calibre Posts: 45,149 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	why don't you use the calibre content server

Advert

Advert