PRS-650 epub formatting question

scribblenauts · 10-12-2010, 08:23 AM

hi guys,

i just bought a prs 650 and just learning the ropes in calibre. I'm trying to convert novels in pdf form to epub. I've tried so many different settings but just could not figure out how to format the text. I'm not sure how to explain it but they all look like this:

“Incredible. Why didn’t Felipe kill Victor?” I asked.

“I’ve given that a lot of thought, of course. I think Felipe has to pretend he believes Victor. I think Felipe realizes that in making

Victor his lieutenant in charge of the whole state of Louisiana, he has inflated Victor’s ambitions to the point of indecency.”

Above is a snippet from a pdf that has been converted to epub. Sentences keeps getting cut randomly and is treated like a new paragraph.

Could anyone help please? I will be forever grateful!!

yakuzaboss · 10-12-2010, 11:05 AM

I would also like to know how to solve this issue.

jswinden · 10-12-2010, 02:05 PM

When using calibre to convert a PDF, the PDF Input tab has a field labeled Line Un-Wrapping Factor. I've never used it but in theory it would help to prevent awkward line breaks like you got.

But to be perfectly honest with you, I've never been able to get calibre or any other program to do a decent job of converting PDFs. In all fairness I think calibre is great, but the nature of PDFs is such that getting a decent conversion depends on how the PDF was created and most of the PDFs I've tried to convert were terribly formed.

Good luck!

JSWolf · 10-12-2010, 02:16 PM

To make life easier, pretend that PDF doesn't exist.

zmix · 10-13-2010, 12:00 AM

I've been experimenting with converting PDF files in Calibre for my Sony 350 reader.. so far the best output format has been ".rtf". It produces incredibly sharp output, and no weird page breaks...

scribblenauts · 10-14-2010, 06:43 AM

Quote:

Originally Posted by jswinden

When using calibre to convert a PDF, the PDF Input tab has a field labeled Line Un-Wrapping Factor. I've never used it but in theory it would help to prevent awkward line breaks like you got.

But to be perfectly honest with you, I've never been able to get calibre or any other program to do a decent job of converting PDFs. In all fairness I think calibre is great, but the nature of PDFs is such that getting a decent conversion depends on how the PDF was created and most of the PDFs I've tried to convert were terribly formed.

Good luck!

you have solved my problem! thank you very much

yakuzaboss · 10-14-2010, 10:20 AM

Quote:

Originally Posted by scribblenauts

you have solved my problem! thank you very much

Sweet! What value are you using for the 'Line Un-Frapping Factor'?

scribblenauts · 10-14-2010, 07:22 PM

i am using 0.6

yakuzaboss · 10-14-2010, 09:27 PM

Quote:

Originally Posted by scribblenauts

i am using 0.6

Thank you. I'm gonna give that a try.

Jason Green · 11-01-2010, 12:24 PM

Quote:

Originally Posted by yakuzaboss

Sweet! What value are you using for the 'Line Un-Frapping Factor'?

I've found the best value for the prs-350 is 0.3 with the margins set to 0.0.

yakuzaboss · 11-01-2010, 12:37 PM

Quote:

Originally Posted by Jason Green

I've found the best value for the prs-350 is 0.3 with the margins set to 0.0.

Thanks! I wonder if that would work for the 650? I'll have to try it out.

Jason Green · 11-01-2010, 01:47 PM

Quote:

Originally Posted by yakuzaboss

Thanks! I wonder if that would work for the 650? I'll have to try it out.

I tried 0.6 on the 350 and the word wrapping was out.

I ended up with sentences
like this
and all over the place.

I'm not sure if the extra inch on the 650 will make a difference.

10-12-2010, 08:23 AM	#1
scribblenauts Junior Member Posts: 6 Karma: 10 Join Date: Dec 2009 Device: sony prs-650	epub formatting question hi guys, i just bought a prs 650 and just learning the ropes in calibre. I'm trying to convert novels in pdf form to epub. I've tried so many different settings but just could not figure out how to format the text. I'm not sure how to explain it but they all look like this: “Incredible. Why didn’t Felipe kill Victor?” I asked. “I’ve given that a lot of thought, of course. I think Felipe has to pretend he believes Victor. I think Felipe realizes that in making Victor his lieutenant in charge of the whole state of Louisiana, he has inflated Victor’s ambitions to the point of indecency.” Above is a snippet from a pdf that has been converted to epub. Sentences keeps getting cut randomly and is treated like a new paragraph. Could anyone help please? I will be forever grateful!!

10-12-2010, 02:05 PM	#3
jswinden Nameless Being	When using calibre to convert a PDF, the PDF Input tab has a field labeled Line Un-Wrapping Factor. I've never used it but in theory it would help to prevent awkward line breaks like you got. But to be perfectly honest with you, I've never been able to get calibre or any other program to do a decent job of converting PDFs. In all fairness I think calibre is great, but the nature of PDFs is such that getting a decent conversion depends on how the PDF was created and most of the PDFs I've tried to convert were terribly formed. Good luck! Last edited by jswinden; 10-12-2010 at 02:07 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Formatting Question	HiddenZebra	Amazon Kindle	2	06-26-2010 02:16 AM
ePub to ePub? (preserve formatting)	DrMoze	Calibre	5	03-21-2010 11:25 PM
html formatting question	Nate the great	Workshop	49	07-17-2009 10:33 AM
line formatting formatting question	daesdaemar	Workshop	9	02-06-2009 11:47 AM
Formatting question for lrf and epub	Robertxc	Calibre	4	02-05-2009 01:17 PM

10-12-2010, 11:05 AM	#2
yakuzaboss Groupie Posts: 171 Karma: 58 Join Date: Aug 2010 Location: Richmond, BC Device: Sony PRS-650	I would also like to know how to solve this issue.

10-12-2010, 02:16 PM	#4
JSWolf Resident Curmudgeon Posts: 78,914 Karma: 143098300 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	To make life easier, pretend that PDF doesn't exist.

10-13-2010, 12:00 AM	#5
zmix Connoisseur Posts: 52 Karma: 10 Join Date: Sep 2010 Device: none	I've been experimenting with converting PDF files in Calibre for my Sony 350 reader.. so far the best output format has been ".rtf". It produces incredibly sharp output, and no weird page breaks...

10-14-2010, 07:22 PM	#8
scribblenauts Junior Member Posts: 6 Karma: 10 Join Date: Dec 2009 Device: sony prs-650	i am using 0.6

Advert

Advert