DR1000 two major problems with 2.0 firmware - Page 2

Gwaihir · 04-12-2010, 05:51 PM

Quote:

Originally Posted by Matthijs

You can disable (2) using the Advanced Settings. We're thinking about disabling this by default for DR1000S.

How can I disable it BEFORE it kicks in on first boot?

Shaggy · 04-12-2010, 05:56 PM

Quote:

Originally Posted by Gwaihir

How can I disable it BEFORE it kicks in on first boot?

I don't think you can, but that's why they said they are thinking of disabling this by default for the final release.

badbob001 · 04-12-2010, 06:23 PM

Quote:

Originally Posted by Shaggy

I don't think you can, but that's why they said they are thinking of disabling this by default for the final release.

I wonder if the index is stored on the internal memory of the device or on the card itself. I guess it doesn't matter since there is no write-protect switch on microsd. Perhaps something can be done with the read-only file attribute.

Shaggy · 04-12-2010, 07:20 PM

Quote:

Originally Posted by badbob001

I wonder if the index is stored on the internal memory of the device or on the card itself. I guess it doesn't matter since there is no write-protect switch on microsd. Perhaps something can be done with the read-only file attribute.

Sounds like that would cause more problems than it solves.

jbbebg · 04-15-2010, 01:15 AM

Major problems with 2.0 from my point of view are common with the previous posts. Following problems special bother me:
- pdf files which were merged with the 1.7.7 and include the scribbled notes are hidden, pages are empty
- also the pages printed with the xournal which include txt are hidden, by are seen at the desktop normaly.
- grey color instead of black in pdf
- not enough zooming
- no available templates in note editor, no possibility to copy/cut/paste sribbles
- recently used files shall be similar as Mackx has done in 1.7.1
- no possibility for merging the scribbles
- some letters in our languages are not seen, there were no problems in 1.7.1
- indexing time to long

Regards,

Matthijs · 04-15-2010, 03:36 AM

Quote:

Originally Posted by Gwaihir

How can I disable it BEFORE it kicks in on first boot?

In one of the other topics I've posted that you can edit your dr.ini before first boot, edit it and add the following line:

Code:

/apps/er/sys/index/add_with_metadata=false

Make sure you use a proper editor, e.g. Wordpad and not Notepad when using Windows.

Matthijs · 04-15-2010, 03:37 AM

Quote:

Originally Posted by jbbebg

- some letters in our languages are not seen, there were no problems in 1.7.1

Can you please elaborate? What language, how does it look?

pthwaite · 04-15-2010, 04:23 AM

Well
The "won't start" syndrome is still with us.
I'd let mine get down to 8% full battery yesterday and then plugged in to recharge. It then charged up and showed 100% full.
First thing this morning, won't start, won't "reset". Had to plug in and recahrge again. Now after 10mins, the RED lED is on and it's just sarting to boot up.
Shows 5% available

(First time with the new software and only the 3rd time in total)

Howard

jbbebg · 04-15-2010, 03:43 PM

Quote:

Originally Posted by Matthijs

Can you please elaborate? What language, how does it look?

Thank you for question. May languagae is Slovene codepage 1250 . We have c with roof, s with roof, z with roof. Special problems were with the letter c with roof what manifestate as a space. There is also other distortion, but I can describe you right now because I dowgrade back to version 1.7.1, because of the mentioned reasons. Problems with the letter is not present in the 1.7.1.

Thank you,
Regards

Shaggy · 04-15-2010, 04:04 PM

Quote:

Originally Posted by pthwaite

Well
The "won't start" syndrome is still with us.
I'd let mine get down to 8% full battery yesterday and then plugged in to recharge. It then charged up and showed 100% full.
First thing this morning, won't start, won't "reset". Had to plug in and recahrge again. Now after 10mins, the RED lED is on and it's just sarting to boot up.
Shows 5% available

Sounds like it didn't go into sleep mode and ran the battery back down again overnight. Was it plugged in all night, or did you unplug it after it showed 100% full? Did you have any documents open when you set it aside for the night, or was it on the menu. If you had a document open, what type was it?

pthwaite · 04-15-2010, 06:03 PM

Hi Shaggy,
No, unplugged after 100%, no docs open as far as I recall and I always shutdown from the menu.

penartur · 04-15-2010, 06:41 PM

Quote:

Originally Posted by jbbebg

with roof

Isn't it called the hat?

whopper · 04-17-2010, 10:29 PM

This firmware rocks in terms of usability, but it is unusable because of the Antialiasing and contrast of the text in screen. It is totally horrible, weak and the old firmware it is much much best than the actual.

There are books that now I simply cant read with the new firmware.

Ride · 04-18-2010, 01:08 AM

The easiest way to make the indexing more palatable is to add some form of status update while indexing is taking place. Any multi-step action that has the potential to run more than 30 to 45 seconds should report something to the user as it processes. It is unreasonable to have a process that can last a minute or more and not report any indication of progress to the user.

Matthijs, you mentioned that on boot there are two indexing steps

Quote:

Originally Posted by Matthijs

The indexing has two steps:
1) Find all files and folders on the card and sync that structure with global.db
2) For each newly added file, open it and get thumbnail & metadata

For step one you could first just get the total number of directories that need to be scanned. Before step 2 begins you could setup a progress bar on the screen that you update every 20 seconds with the progress made as a percentage of the directories that the indexing scan as completed, the current directory being scanned, and the total time the index scan has been running.

The issue with the indexing would not be so bad if we had some idea of how much time was remaining until the end of the index scan. Updating the progress bar and current directory of the scan gives people an idea of how long they will have to wait. This makes the wait seem shorter as the user is not sitting there waiting and wondering when it is going to finish loading.

Ride

SplogSplog · 04-18-2010, 05:11 AM

Quote:

Originally Posted by whopper

This firmware rocks in terms of usability, but it is unusable because of the Antialiasing and contrast of the text in screen. It is totally horrible, weak and the old firmware it is much much best than the actual.

There are books that now I simply cant read with the new firmware.

The same is true for me. Plenty of my books are scans of old out-of-print books in foreign languages. With the reduced contrast some of them are now illegible.

04-17-2010, 10:29 PM	#28
whopper Addict Posts: 350 Karma: 22726 Join Date: Mar 2008 Location: Europe Device: Boox max 2	This firmware rocks in terms of usability, but it is unusable because of the Antialiasing and contrast of the text in screen. It is totally horrible, weak and the old firmware it is much much best than the actual. There are books that now I simply cant read with the new firmware. Last edited by whopper; 04-17-2010 at 10:32 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UGH--Battery problems-March firmware: ME too!!!	hidari	Astak EZReader	15	03-27-2010 12:56 AM
Problems buying books with new firmware Epub	becket	Bookeen	17	01-24-2010 05:08 AM
Firmware Update Problems Updating to Newest Firmware	Dr. Wily	Amazon Kindle	12	12-04-2009 07:10 PM
Problems updating Firmware	Janelle	HanLin eBook	7	08-10-2009 11:08 AM
Have you had major problems recently with your Sony Reader?	vivaldirules	Sony Reader	27	01-09-2008 08:39 AM

04-15-2010, 01:15 AM	#20
jbbebg Enthusiast Posts: 28 Karma: 10 Join Date: Aug 2007 Device: prs 500, prs 505, Irex Iliad, Irex Digital	Major problems with 2.0 from my point of view are common with the previous posts. Following problems special bother me: - pdf files which were merged with the 1.7.7 and include the scribbled notes are hidden, pages are empty - also the pages printed with the xournal which include txt are hidden, by are seen at the desktop normaly. - grey color instead of black in pdf - not enough zooming - no available templates in note editor, no possibility to copy/cut/paste sribbles - recently used files shall be similar as Mackx has done in 1.7.1 - no possibility for merging the scribbles - some letters in our languages are not seen, there were no problems in 1.7.1 - indexing time to long Regards,

04-15-2010, 04:23 AM	#23
pthwaite Fanatic Posts: 597 Karma: 430 Join Date: Aug 2008 Location: Ellesmere Port, UK Device: DR1000S Sony PRS505 iPad iPhone	Well The "won't start" syndrome is still with us. I'd let mine get down to 8% full battery yesterday and then plugged in to recharge. It then charged up and showed 100% full. First thing this morning, won't start, won't "reset". Had to plug in and recahrge again. Now after 10mins, the RED lED is on and it's just sarting to boot up. Shows 5% available (First time with the new software and only the 3rd time in total) Howard

04-15-2010, 06:03 PM	#26
pthwaite Fanatic Posts: 597 Karma: 430 Join Date: Aug 2008 Location: Ellesmere Port, UK Device: DR1000S Sony PRS505 iPad iPhone	Hi Shaggy, No, unplugged after 100%, no docs open as far as I recall and I always shutdown from the menu.

Advert

Advert