0.6.45 Binary installation failure

lamparty · 03-14-2010, 12:27 AM

Tried several times, with a reboot in between! No joy. here's the error message
Checking downloaded file integrity...

bzip2: I/O or other error, bailing out. Possible reason follows.
bzip2: Broken pipe
Input file = (stdin), output file = (stdout)
tar: Child returned status 1
tar: Exiting with failure status due to previous errors
Failed to download, aborting

Running Ubuntu 9.10

readx · 03-14-2010, 10:40 AM

Quote:

Originally Posted by lamparty

Tried several times, with a reboot in between! No joy. here's the error message
Checking downloaded file integrity...

bzip2: I/O or other error, bailing out. Possible reason follows.
bzip2: Broken pipe
Input file = (stdin), output file = (stdout)
tar: Child returned status 1
tar: Exiting with failure status due to previous errors
Failed to download, aborting

Running Ubuntu 9.10

Same problem here

theducks · 03-14-2010, 12:44 PM

Quote:

Originally Posted by readx

Same problem here

Exact same... Me too.

kovidgoyal · 03-15-2010, 11:42 AM

Sigh I have no idea what causes these errors. I can never replicate them, I can only conclude that there is some bad server in the google cdn that sends bad copies of the file to some users.

I don't really have anything to suggest except try it repeatedly.

theducks · 03-15-2010, 07:09 PM

I tried many times today i686 linux version
Failed similar 2 different ways.
some times "TAR= 8 blocks" shows before the fail
other times, it just fails.

I observed the /tmp folder.
the file grew to something around 32M before the script continued (and failed).

kovidgoyal · 03-15-2010, 11:36 PM

All the script does is call the tar program to extract the contents of the tarball. If that's failing it means the downloaded file is corrupted. Since it works for me and other linux users, it means that the copy on only one of the CDN servers is corrupted, which affects some users, but not all. I've tried this download from two locations, one in India and one in the US ad it's never failed for me. So I really dont know what to tell you.

theducks · 03-16-2010, 04:09 AM

Quote:

Originally Posted by kovidgoyal

All the script does is call the tar program to extract the contents of the tarball. If that's failing it means the downloaded file is corrupted. Since it works for me and other linux users, it means that the copy on only one of the CDN servers is corrupted, which affects some users, but not all. I've tried this download from two locations, one in India and one in the US ad it's never failed for me. So I really dont know what to tell you.

Do you know where the servers are located (G Sunnyvale campus?) ?
I seem to get the same server every time.

kovidgoyal · 03-16-2010, 08:27 PM

No idea I'm afraid.

Starson17 · 03-16-2010, 08:57 PM

Quote:

Originally Posted by theducks

Do you know where the servers are located (G Sunnyvale campus?) ?
I seem to get the same server every time.

You can try a proxy (presumably the server closest to you is being chosen based on your IP), or have someone else d/l for you and put it on rapidshare or megaupload.

kovidgoyal · 03-16-2010, 09:01 PM

You can get the file from the sourceforge.net servers as well and just untar it into the /opt/calibre directory. Everything except device automounting will work if you do that.

theducks · 03-16-2010, 10:57 PM

Quote:

Originally Posted by kovidgoyal

You can get the file from the sourceforge.net servers as well and just untar it into the /opt/calibre directory. Everything except device automounting will work if you do that.

Thanks for the suggestions.

Enuf · 03-17-2010, 05:13 AM

I know its not much help to add a "me too" but I have always managed to successfully download calibre onto Ubuntu. For various reasons I did a fresh install of 9.10 and I thought that I was missing dependencies when I couldn't install 0.6.45. So in that sense I was glad to read that others were having problems too.

I've installed 0.6.13 from synaptic. Hopefully it'll get sorted in time

theducks · 03-17-2010, 10:17 AM

Quote:

Originally Posted by Enuf

I know its not much help to add a "me too" but I have always managed to successfully download calibre onto Ubuntu. For various reasons I did a fresh install of 9.10 and I thought that I was missing dependencies when I couldn't install 0.6.45. So in that sense I was glad to read that others were having problems too.

I've installed 0.6.13 from synaptic. Hopefully it'll get sorted in time

I sucessfully downloaded the bz2 package from sourceforge
I then sudo a nautilus session and unpackaged into /opt/calibre
done.
Note that my metadata.DB was already at the 6.44 level.

Note to Kovid: The sourceforge Calibre Linux download button says 6.14.
I almost bailed

The next page offered current versions.

Enuf · 03-17-2010, 11:45 AM

"I sucessfully downloaded the bz2 package from sourceforge
I then sudo a nautilus session and unpackaged into /opt/calibre
done.
Note that my metadata.DB was already at the 6.44 level" quote theducks

Thought I'd have a go at this and I managed to install it but I took the long way round! (my knowledge of shell commands is terrible!)

In case it might help someone else - I downloaded the .bz2 and converted it to deb file using "alien" (install from synaptic and then in a terminal type "sudo alien --to-deb <path to file>"). I then installed the deb file successfully but the program wasn't included in the applications list

Had a brainwave then and simply added it to the startup applications! So now when I start ubuntu I have the new version of calibre sitting on the desktop

Im absolutely sure there is an easier way to do this but this worked for me.

I hope I don't have to do this with every new version!!

lamparty · 03-19-2010, 01:19 AM

Since 0.6.42 seems to work fine for my needs right now. I think I will stay with it till the next update, especially since I just tried the binary install again and it still fails the exact same way! The CLI and I have never got along very well! 8-) That's why i had an Atari 1040ST instead of a Commodore 64 or an Apple! and didn't go to Windows till win95, now that Ubuntu is usable with GUI, i am a happy camper again! Kovid enjoy your time in India! Don't spend too much time on the computer, we will survive till you get back!

03-14-2010, 12:27 AM	#1
lamparty Member Posts: 24 Karma: 10 Join Date: Aug 2009 Device: Sony Reader PRS-505	0.6.45 Binary installation failure Tried several times, with a reboot in between! No joy. here's the error message Checking downloaded file integrity... bzip2: I/O or other error, bailing out. Possible reason follows. bzip2: Broken pipe Input file = (stdin), output file = (stdout) tar: Child returned status 1 tar: Exiting with failure status due to previous errors Failed to download, aborting Running Ubuntu 9.10

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Searching in binary field	Manichean	Calibre	2	06-14-2010 06:29 AM
0.6.45 Windows installation failure	bellyqueen	Calibre	1	03-16-2010 10:32 AM
Problem with binary install	ferridder	Calibre	1	11-18-2008 01:27 PM
Binary Install of calibre	Glenendale	Calibre	1	11-10-2008 12:58 PM
4.95 installation failure: Kubuntu 8.04	JeffElkins	Calibre	14	10-15-2008 05:40 PM

03-15-2010, 11:42 AM	#4
kovidgoyal creator of calibre Posts: 45,199 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Sigh I have no idea what causes these errors. I can never replicate them, I can only conclude that there is some bad server in the google cdn that sends bad copies of the file to some users. I don't really have anything to suggest except try it repeatedly.

03-15-2010, 07:09 PM	#5
theducks Well trained by Cats Posts: 30,912 Karma: 60358908 Join Date: Aug 2009 Location: The Central Coast of California Device: Kobo Libra2,Kobo Aura2v1, K4NT(Fixed: New Bat.), Galaxy Tab A	I tried many times today i686 linux version Failed similar 2 different ways. some times "TAR= 8 blocks" shows before the fail other times, it just fails. I observed the /tmp folder. the file grew to something around 32M before the script continued (and failed).

03-15-2010, 11:36 PM	#6
kovidgoyal creator of calibre Posts: 45,199 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	All the script does is call the tar program to extract the contents of the tarball. If that's failing it means the downloaded file is corrupted. Since it works for me and other linux users, it means that the copy on only one of the CDN servers is corrupted, which affects some users, but not all. I've tried this download from two locations, one in India and one in the US ad it's never failed for me. So I really dont know what to tell you.

03-16-2010, 08:27 PM	#8
kovidgoyal creator of calibre Posts: 45,199 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	No idea I'm afraid.

03-16-2010, 09:01 PM	#10
kovidgoyal creator of calibre Posts: 45,199 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	You can get the file from the sourceforge.net servers as well and just untar it into the /opt/calibre directory. Everything except device automounting will work if you do that.

03-17-2010, 05:13 AM	#12
Enuf Member Posts: 21 Karma: 10 Join Date: Sep 2008 Device: eeePC 900, iphone and PRS300	I know its not much help to add a "me too" but I have always managed to successfully download calibre onto Ubuntu. For various reasons I did a fresh install of 9.10 and I thought that I was missing dependencies when I couldn't install 0.6.45. So in that sense I was glad to read that others were having problems too. I've installed 0.6.13 from synaptic. Hopefully it'll get sorted in time

03-17-2010, 11:45 AM	#14
Enuf Member Posts: 21 Karma: 10 Join Date: Sep 2008 Device: eeePC 900, iphone and PRS300	"I sucessfully downloaded the bz2 package from sourceforge I then sudo a nautilus session and unpackaged into /opt/calibre done. Note that my metadata.DB was already at the 6.44 level" quote theducks Thought I'd have a go at this and I managed to install it but I took the long way round! (my knowledge of shell commands is terrible!) In case it might help someone else - I downloaded the .bz2 and converted it to deb file using "alien" (install from synaptic and then in a terminal type "sudo alien --to-deb <path to file>"). I then installed the deb file successfully but the program wasn't included in the applications list Had a brainwave then and simply added it to the startup applications! So now when I start ubuntu I have the new version of calibre sitting on the desktop Im absolutely sure there is an easier way to do this but this worked for me. I hope I don't have to do this with every new version!!

03-19-2010, 01:19 AM	#15
lamparty Member Posts: 24 Karma: 10 Join Date: Aug 2009 Device: Sony Reader PRS-505	Since 0.6.42 seems to work fine for my needs right now. I think I will stay with it till the next update, especially since I just tried the binary install again and it still fails the exact same way! The CLI and I have never got along very well! 8-) That's why i had an Atari 1040ST instead of a Commodore 64 or an Apple! and didn't go to Windows till win95, now that Ubuntu is usable with GUI, i am a happy camper again! Kovid enjoy your time in India! Don't spend too much time on the computer, we will survive till you get back!