DR800 Cover - Page 3

Kolenka · 03-03-2010, 06:09 PM

Speaking of build quality... does anyone else get banding on areas of solid color, like the bottom page bar region? I'm noticing that as well as a little ghosting moving from page to page.

mgmueller · 03-04-2010, 02:30 AM

Quote:

Originally Posted by MobileTechReview

Mine is even as well.

Well, what's "even" or "uneven"?
The difference in height isn't big. It's maybe 0.3mm. I have the same for one of the buttons of Sony 300.
0.3mm sounds awfully small. But you easily feel it in your fingertips of course. It doesn't harm functionality of course. But it's a (minor) annoyance.

mgmueller · 03-04-2010, 02:33 AM

Quote:

Originally Posted by Kolenka

Speaking of build quality... does anyone else get banding on areas of solid color, like the bottom page bar region? I'm noticing that as well as a little ghosting moving from page to page.

I'm noticing the ghosting, but not the banding you describe. For the ghosting I've hoped, this only might be a temporary thing. It's not very strong, maybe on the level of older units like iRex iLiad. But I don't see it on other recent units.

Kolenka · 03-04-2010, 03:15 AM

Hrm... the banding gets pretty annoying at times when viewing my newspapers from Sony's store or from my own tool (which uses single-color buttons/blocks). Oddly, going from white to the flat color seems to work, but if it redraws the same color, the banding appears.

Might be a defect in my particular screen. Normal burn-in procedures likely wouldn't catch this defect.

madusaya · 03-04-2010, 04:32 AM

hi~ i'm korean
Custom Made Leather Case

mgmueller · 03-04-2010, 05:29 AM

Quote:

Originally Posted by Kolenka

Hrm... the banding gets pretty annoying at times when viewing my newspapers from Sony's store or from my own tool (which uses single-color buttons/blocks). Oddly, going from white to the flat color seems to work, but if it redraws the same color, the banding appears.

Might be a defect in my particular screen. Normal burn-in procedures likely wouldn't catch this defect.

Just checked. Didn't recognise the banding you describe, as I simply haven't read anything yet on iRex 800. Only have been testing it for the discussions here.
But now, when checking out and focussing on it, I see what you mean.
Tested a comic, which I've generated some time ago for iRex iLiad. The tool I've used was optimising the b/w contrast. Here in some pages the banding becomes pretty obvious. I can imagine, for the "wrong" document this can be pretty annoying.

CoolDragon · 03-04-2010, 08:10 AM

Hi madusaya, I am pretty sure that quite a few people on this forum are very interested in where and how you got your case, it looks very good.

madusaya · 03-04-2010, 09:17 AM

Quote:

Originally Posted by CoolDragon

Hi madusaya, I am pretty sure that quite a few people on this forum are very interested in where and how you got your case, it looks very good.

thank you..
i can't speak english very well

Custom Made store in korea
http://www.hevitz.com/front/php/prod...isplay_group=1

Mr. Goodbar · 03-04-2010, 09:52 AM

Quote:

Originally Posted by CoolDragon

Hi madusaya, I am pretty sure that quite a few people on this forum are very interested in where and how you got your case, it looks very good.

I would second that. Case looks very nice.

SCION · 03-04-2010, 10:19 AM

Yes, very nice case.

Shaggy · 03-04-2010, 10:21 AM

Quote:

Originally Posted by Kolenka

Speaking of build quality... does anyone else get banding on areas of solid color, like the bottom page bar region? I'm noticing that as well as a little ghosting moving from page to page.

Ghosting has always been a part of eInk technology. How much you notice it is a function of how they do the page refreshes. It's a trade off, typically faster page refreshes will be more susceptible to ghosting. Each manufacturer figures out what works best for them balancing those two factors.

You also see it more with partial refreshes, which are typically intended to be very fast but give up quality a little bit, as opposed to a full screen refresh. Things like popup windows or some things on the menu bar, etc.

Shaggy · 03-04-2010, 10:21 AM

Quote:

Originally Posted by mgmueller

Well, what's "even" or "uneven"?
The difference in height isn't big. It's maybe 0.3mm. I have the same for one of the buttons of Sony 300.
0.3mm sounds awfully small. But you easily feel it in your fingertips of course. It doesn't harm functionality of course. But it's a (minor) annoyance.

Mine feels "even" to my fingertips.

Shaggy · 03-04-2010, 10:23 AM

Quote:

Originally Posted by madusaya

Custom Made Leather Case

Nice job!

You might start getting requests to order one.

badbob001 · 03-04-2010, 10:24 AM

Quote:

Originally Posted by mgmueller

Well, what's "even" or "uneven"?
The difference in height isn't big. It's maybe 0.3mm. I have the same for one of the buttons of Sony 300.
0.3mm sounds awfully small. But you easily feel it in your fingertips of course. It doesn't harm functionality of course. But it's a (minor) annoyance.

Perhaps some photos will help remove the perception factor from the discussion?

Jumpn Jack Flash · 03-04-2010, 11:16 AM

After an initial contact to M_Edge a few weeks ago where they said they had no plans to do a cover for the 800, they have now contacted me saying that they should have one out later in the spring but they are not sure exactly when.

So I take this to be a sign the 800 is selling well

03-03-2010, 06:09 PM	#31
Kolenka <Insert Wit Here> Posts: 1,017 Karma: 1275899 Join Date: Jan 2008 Location: Puget Sound Device: Kindle Oasis, Kobo Forma	Speaking of build quality... does anyone else get banding on areas of solid color, like the bottom page bar region? I'm noticing that as well as a little ghosting moving from page to page. Last edited by Kolenka; 03-03-2010 at 06:16 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DR800 ANN: DR800+. Port of some DR1000 features to the DR800	Iñigo	iRex	274	04-05-2013 02:24 PM
DR800	parryl	iRex	1	08-06-2010 03:00 PM
Ended Irex DR800 Cover & Stylus	Mickey330	Flea Market	1	07-21-2010 04:22 AM
DR800 Emulator	Jumpn Jack Flash	iRex	4	02-20-2010 04:19 AM

03-04-2010, 03:15 AM	#34
Kolenka <Insert Wit Here> Posts: 1,017 Karma: 1275899 Join Date: Jan 2008 Location: Puget Sound Device: Kindle Oasis, Kobo Forma	Hrm... the banding gets pretty annoying at times when viewing my newspapers from Sony's store or from my own tool (which uses single-color buttons/blocks). Oddly, going from white to the flat color seems to work, but if it redraws the same color, the banding appears. Might be a defect in my particular screen. Normal burn-in procedures likely wouldn't catch this defect.

03-04-2010, 04:32 AM	#35
madusaya Member Posts: 10 Karma: 12 Join Date: Feb 2010 Device: dr800sg	hi~ i'm korean Custom Made Leather Case

03-04-2010, 08:10 AM	#37
CoolDragon Addict Posts: 244 Karma: 124 Join Date: Feb 2010 Device: none	Hi madusaya, I am pretty sure that quite a few people on this forum are very interested in where and how you got your case, it looks very good.

03-04-2010, 10:19 AM	#40
SCION Séduisant Posts: 4,706 Karma: 2107018 Join Date: Jan 2010 Location: Texas, USA Device: Boox Note Air2+; Kobo Libra2; Kindle Scribe, Oasis3; iPad Mini6	Yes, very nice case.

03-04-2010, 11:16 AM	#45
Jumpn Jack Flash Lazy Git Posts: 124 Karma: 1266 Join Date: Jun 2009 Location: The soggy Emerald Isle Device: iRex DR800S	After an initial contact to M_Edge a few weeks ago where they said they had no plans to do a cover for the 800, they have now contacted me saying that they should have one out later in the spring but they are not sure exactly when. So I take this to be a sign the 800 is selling well