What case is the best for a Sony Reader? - Page 3

Meemo · 11-21-2009, 12:55 PM

I got the Sony standard cover for my Sony 300. I do wish it had some way of closing it securely for when I have it in my purse. I made a fabric cover for it with some fabric scraps & used a button & ribbon closure. Works, but I find I really prefer the cover "naked" - what I like about the Sony cover is it's so lightweight, like the 300 itself, and I do like that it has the magnets that keep it closed when it's lying on a table. My current solution is to use a narrow stretchy headband to keep it closed when I'm carrying it in my purse.

And yes, the Oberon covers are lovely - I have one for my Kindle. Thought I'd like one for the Sony as well, but they're a bit heavy and I'm realizing I don't want the added weight.

pikelet · 11-22-2009, 06:52 AM

I love the Oberon covers. If only they made covers for the 300 I would get one in a heartbeat.

I also forgot to order a cover when I bought my reader, and the shipping pretty much doubles the cost, so it would have to be a really special cover to tempt me to spend that much.

But I've got plenty of crafty stuff like card and felt around the house, so I guess I'll have to try the DIY option too

DrMoze · 11-22-2009, 11:18 AM

If only Oberon made a cover that attached to the hinge holes on the 600 (or 300), like the Sony cover. I *hate* those cheeezy corner straps!!!!!

Harmon · 11-24-2009, 02:13 PM

Quote:

Originally Posted by Meemo

I got the Sony standard cover for my Sony 300. I do wish it had some way of closing it securely for when I have it in my purse.

Why not use a rubber band? They come in all different sizes & strengths.

ereadersRus · 11-26-2009, 09:51 PM

they have the book armor in australia as well, love the product, best protection there is!
http://www.ereadersrus.com.au

Meemo · 11-27-2009, 12:10 PM

Quote:

Originally Posted by okalyddude

I have another question about the 505 / 600 brown pleather cover:

On the 600, if you have the device on and close it, you run the risk of some buttons being hit. I thought I saw somewhere on the forum that somebody had found a good fix for this. (can't find the thread now) was it merely cutting a thin rectangle through the first layer of the cover? Anything else done? Anyone else a little annoyed by this?

I know it's not a big deal to shut it off (or sleep, rather) when you close it, but sometimes I just have to toss the book down (gently) closing the cover.

I know when people were having issues with Kindle covers pushing buttons, they used one of those plastic/vinyl "bumpers" (or one of the felt pads - those are a bit thinner) that you can use on cabinet doors, etc - they're sticky on the back. They'd just put one on either the inside of the cover or on the Kindle itself.

Meemo · 11-27-2009, 12:12 PM

Quote:

Originally Posted by Harmon

Why not use a rubber band? They come in all different sizes & strengths.

Thought about that, but my hairband is less likely to break - plus it's much more decorative.

okalyddude · 12-13-2009, 09:33 PM

Has anyone tried these neoprene covers?

http://www.amazon.com/Premium-Neopre.../dp/B0019LVYMW

I'm trying to decide between one of these, and the Book Armors.

Josieb1 · 12-19-2009, 03:38 PM

I have two neoprene covers, not one of these, mine came from I-NIQUE

http://www.i-nique.com/model.asp/cn=6/c=478

I love them, the reader slips in and out very easily, you do have to take the reader out to read though

sdean7855 · 06-23-2010, 01:09 PM

http://www.oberondesign.com/Sony.php
"5/5/2010 - Sorry! We have discontinued the Sony e-reader Cover."

EatingPie · 06-23-2010, 03:32 PM

Quote:

Originally Posted by sajje

M-Edge Latitude Jacket for Sony Reader Touch Edition
http://www.amazon.com/M-Edge-Latitud...460132&sr=8-44
[/url]

I just bought a PRS-505, and the cover digs into my skin between thumb and forefinger when I hold it one-handed (my usual situation). The Sony "deluxe" replacement cover, PRS-600 sized, ($13.00) arrived, much softer but it freekin' reeked! Being asthmatic, I'm pretty sensitive to strong smells, which my wife hassles me about a lot -- except this time! She won't even let me use the thing, it smells so bad!

So I looked at the M-EDGE stuff.

The Platform Cover was stiff, and very difficult to fold back. Same with their smaller leather job. Very disappointing design. Given the smell issue -- and being a surfer -- neoprene is always out of the question. It's rubber, which is good for protection, but tends to smell, and that smell will stick to your skin. No kidding.

I finally decided on the M-EDGE Latitude. It's canvas, with a polar fleece interior. I machine washed it immediately upon arrival, and it was fine. It's soft (being fabric!), and does not dig into my hand. It's a bit bulky when you fold it all the way back, but it works, and still can be held one-handed. I also like the zippers, something that I was pretty skeptical about initially. Again, I purchased the PRS-600 size, but it fits the PRS-505 very snugly -- survived the "shake test" over the bed.

The only problem is that it's overpriced at $35.00 (the Neoprene one and the Platform are laughable at their prices). I got mine for just under $20.00, either from B&H or 6ave.com. Did a price match with a sale from some other site, and even had free shipping. If you can get in the $20.00 range, even up to $25.00, I'd say go for it. It's a very nice cover.

-Pie

dorino · 06-23-2010, 03:40 PM

Quote:

Originally Posted by EatingPie

The only problem is that it's overpriced at $35.00 (the Neoprene one and the Platform are laughable at their prices). I got mine for just under $20.00, either from B&H or 6ave.com. Did a price match with a sale from some other site, and even had free shipping. If you can get in the $20.00 range, even up to $25.00, I'd say go for it. It's a very nice cover.

-Pie

Sony set the bar pretty low (or high?) for pricing, though. Their own covers for the device are 45-50 dollars, aren't they?

EatingPie · 06-23-2010, 04:16 PM

Quote:

Originally Posted by dorino

Sony set the bar pretty low (or high?) for pricing, though. Their own covers for the device are 45-50 dollars, aren't they?

Typically in the $30.00 range. But they can be had for $15.00 from Amazon or others. I got my stinky replacement for $13.00, and it was genuine. Even SonyStyle had them below $20.00 for a while, though I'm not sure if that was specific to a model, or if it's still going on.

-Pie

akito38 · 06-25-2010, 03:49 PM

after reading about peoples screens getting damaged due to a bit of pressure I am going to try and find a plastic hard shell case while I am on the go. Something that won't crush the reader.

sabredog · 06-25-2010, 09:05 PM

I recently purchased an M-edge platform leather cover for my PRS-300 and, though initially a little cold am starting to really like it.

The cover is sturdy with the space for the M-edge light, which is next on my shopping list.

Recommended!

11-26-2009, 09:51 PM	#35
ereadersRus Junior Member Posts: 3 Karma: 10 Join Date: Nov 2009 Location: australia Device: many	they have the book armor in australia as well, love the product, best protection there is! http://www.ereadersrus.com.au Last edited by ereadersRus; 04-29-2010 at 03:43 AM.

06-23-2010, 01:09 PM	#40
sdean7855 Junior Member Posts: 6 Karma: 10 Join Date: Jun 2010 Device: SONY Reader Pocket Edition	Oberon no longer offers Sony case http://www.oberondesign.com/Sony.php "5/5/2010 - Sorry! We have discontinued the Sony e-reader Cover."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sony Reader PRS-300 Bundle - Reader, Clutch case & 4 ebooks for $199	Faenad	Deals and Resources (No Self-Promotion or Affiliate Links)	1	10-07-2009 04:28 PM
NEW - Acrylic case for Sony Reader on eBay - only $12.99+shipping	gardenstate	Sony Reader	0	01-14-2009 12:34 AM
Wooden case for Sony Reader	heatherc	Sony Reader	11	09-09-2008 04:16 PM
Possible Waterfield Designs Case for Sony Reader	ojleblanc	Sony Reader	6	06-15-2008 08:09 PM
inexpensive Sony Reader case	Nate the great	Sony Reader	24	10-14-2007 06:15 PM

11-21-2009, 12:55 PM	#31
Meemo Groupie Posts: 175 Karma: 1023952 Join Date: Aug 2008 Location: U.S. Device: Kindle Oasis (1st & 2nd gen) & a Paperwhite	I got the Sony standard cover for my Sony 300. I do wish it had some way of closing it securely for when I have it in my purse. I made a fabric cover for it with some fabric scraps & used a button & ribbon closure. Works, but I find I really prefer the cover "naked" - what I like about the Sony cover is it's so lightweight, like the 300 itself, and I do like that it has the magnets that keep it closed when it's lying on a table. My current solution is to use a narrow stretchy headband to keep it closed when I'm carrying it in my purse. And yes, the Oberon covers are lovely - I have one for my Kindle. Thought I'd like one for the Sony as well, but they're a bit heavy and I'm realizing I don't want the added weight.

11-22-2009, 06:52 AM	#32
pikelet girl from oz Posts: 67 Karma: 834 Join Date: Oct 2009 Location: Brisbane, Australia Device: iPad, Sony PRS-650, Sony PRS-300, Cybook Gen3	I love the Oberon covers. If only they made covers for the 300 I would get one in a heartbeat. I also forgot to order a cover when I bought my reader, and the shipping pretty much doubles the cost, so it would have to be a really special cover to tempt me to spend that much. But I've got plenty of crafty stuff like card and felt around the house, so I guess I'll have to try the DIY option too

11-22-2009, 11:18 AM	#33
DrMoze Booknut Posts: 860 Karma: 2852 Join Date: Jul 2007 Location: West Palm Beach, Florida! Device: Sony Reader 500/505/300/350, Nook Glowlight Plus (6")	If only Oberon made a cover that attached to the hinge holes on the 600 (or 300), like the Sony cover. I hate those cheeezy corner straps!!!!!

12-13-2009, 09:33 PM	#38
okalyddude Enthusiast Posts: 41 Karma: 602 Join Date: Oct 2009 Device: E600	Has anyone tried these neoprene covers? http://www.amazon.com/Premium-Neopre.../dp/B0019LVYMW I'm trying to decide between one of these, and the Book Armors.

12-19-2009, 03:38 PM	#39
Josieb1 Grand Sorcerer Posts: 5,100 Karma: 18051062 Join Date: Nov 2009 Location: UK Device: Kindle Scribe, Coloursoft, PW SE, Kindle 6, Kobo Libra 2, Clara BW	I have two neoprene covers, not one of these, mine came from I-NIQUE http://www.i-nique.com/model.asp/cn=6/c=478 I love them, the reader slips in and out very easily, you do have to take the reader out to read though

06-25-2010, 03:49 PM	#44
akito38 Junior Member Posts: 5 Karma: 12 Join Date: Jun 2010 Device: Sony PRS - 600 touch edition	after reading about peoples screens getting damaged due to a bit of pressure I am going to try and find a plastic hard shell case while I am on the go. Something that won't crush the reader.

06-25-2010, 09:05 PM	#45
sabredog Geographically Restricted Posts: 2,630 Karma: 14933353 Join Date: Dec 2008 Location: Perth, Australia Device: Sony PRS-T3, Kindle Voyage, iPad Air2, Nexus7v2	I recently purchased an M-edge platform leather cover for my PRS-300 and, though initially a little cold am starting to really like it. The cover is sturdy with the space for the M-edge light, which is next on my shopping list. Recommended!

Advert

Advert