Hanlin v5 Newbie Questions

Khelbiros · 09-04-2009, 06:12 PM

I'm still playing with my Hanlin v5 after getting it the other day. I've got a couple of questions.

a) Do I need to turn it off when I'm not using it, or can I just leave on the last page I had open? What is better for the battery?

b) I've got a Powerbook with OS X 10.4. When I connect the Hanlin to the computer via the USB stick, it appears as a mounted drive when I click the OK button on the Hanlin. So far so good. But when I try and disconnect the Hanlin through the OS, it immediately remounts itself. Even clicking extra quickly to eject it doesn't do any good as soon as I tell the software to disconnect it, it reconnects. I have to pull the USB cord out manually. When I do this, I get a warning that my Hanlin could be damaged because I didn't dismount the drive properly. Any ideas?

wallcraft · 09-04-2009, 06:17 PM

There is typically no need to turn off Hanlin's when they are not being used. The battery will still last for weeks. You can lock the keyboard if you need to.

I typically exit the ebook, back to the file menu, to ensure that the last read location is saved. I'm not sure this is necessary though.

Dave_S · 09-04-2009, 06:25 PM

Quote:

Originally Posted by Khelbiros

I'm still playing with my Hanlin v5 after getting it the other day. I've got a couple of questions.

a) Do I need to turn it off when I'm not using it, or can I just leave on the last page I had open? What is better for the battery?

I leave mine turned on all the time, since sleep power consumption is very low. THe way that I use mine I think that I get longer battery run time that way, since otherwise I would be turning it on and off multiple times during the day. If you only turn on once a day the battery might last a little longer by turning it off. I guess what I am trying to say is that usage patterns probably make a difference in which gives the longest battery charge life. The boot up has the processor running at full speed for quite a bit of time, and that does load the battery heavily then. I have mine on for weeks at a time without charging the battery.

Sorry, but I do know anything about your Mac question.

allen · 09-07-2009, 05:24 AM

Quote:

Originally Posted by Khelbiros

I've got a Powerbook with OS X 10.4. When I connect the Hanlin to the computer via the USB stick, it appears as a mounted drive when I click the OK button on the Hanlin. So far so good. But when I try and disconnect the Hanlin through the OS, it immediately remounts itself. Even clicking extra quickly to eject it doesn't do any good as soon as I tell the software to disconnect it, it reconnects. I have to pull the USB cord out manually. When I do this, I get a warning that my Hanlin could be damaged because I didn't dismount the drive properly. Any ideas?

When the indicator light is not flashing,right-click the "Removable disk"icon on your computar,then select "Eject" from the menu,only then it's safe to disconnect the USB cable.

Khelbiros · 09-07-2009, 06:22 AM

Quote:

Originally Posted by allen

When the indicator light is not flashing,right-click the "Removable disk"icon on your computar,then select "Eject" from the menu,only then it's safe to disconnect the USB cable.

Hi Allen,

My main problem is that I'm on a Mac (OS X 10.4), not Windows. To eject a mounted drive, like a USB stick, normally I just click the eject arrow where it appears and I can remove it. With the Hanlin connected, when I click on the Finder window to eject it, it quickly remounts itself again before I can pull the cord. Any ideas?

allen · 09-07-2009, 09:32 PM

Quote:

Originally Posted by Khelbiros

Hi Allen,

My main problem is that I'm on a Mac (OS X 10.4), not Windows. To eject a mounted drive, like a USB stick, normally I just click the eject arrow where it appears and I can remove it. With the Hanlin connected, when I click on the Finder window to eject it, it quickly remounts itself again before I can pull the cord. Any ideas?

Hi,Khelbiros
After you click on the finder window to eject,you can pull out USB cable,it's OK. Don't care of remounting.

09-04-2009, 06:12 PM	#1
Khelbiros Junior Member Posts: 9 Karma: 62 Join Date: Aug 2009 Device: Hanlin v5, Stanza	Hanlin v5 Newbie Questions I'm still playing with my Hanlin v5 after getting it the other day. I've got a couple of questions. a) Do I need to turn it off when I'm not using it, or can I just leave on the last page I had open? What is better for the battery? b) I've got a Powerbook with OS X 10.4. When I connect the Hanlin to the computer via the USB stick, it appears as a mounted drive when I click the OK button on the Hanlin. So far so good. But when I try and disconnect the Hanlin through the OS, it immediately remounts itself. Even clicking extra quickly to eject it doesn't do any good as soon as I tell the software to disconnect it, it reconnects. I have to pull the USB cord out manually. When I do this, I get a warning that my Hanlin could be damaged because I didn't dismount the drive properly. Any ideas? Last edited by Khelbiros; 09-04-2009 at 06:15 PM. Reason: forgot a question

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Newbie Question : Draw Graphics on Hanlin v3 Display	biodiesel	HanLin eBook	6	01-06-2010 12:17 AM
Newbie mac user of Hanlin V3	andrespuentes	Introduce Yourself	2	12-31-2008 11:04 AM
New to ereaders, questions about Hanlin	bigmat1201	HanLin eBook	12	10-14-2008 07:18 AM
HanLin V3 or iRex iLiad? Help a newbie out...	raynerape	Which one should I buy?	1	03-05-2008 03:55 PM
Post your Questions about the Hanlin V8 and V2 here!	CommanderROR	HanLin eBook	118	06-15-2006 09:46 AM

09-04-2009, 06:17 PM	#2
wallcraft reader Posts: 6,977 Karma: 5183568 Join Date: Mar 2006 Location: Mississippi, USA Device: Kindle 3, Kobo Glo HD	There is typically no need to turn off Hanlin's when they are not being used. The battery will still last for weeks. You can lock the keyboard if you need to. I typically exit the ebook, back to the file menu, to ensure that the last read location is saved. I'm not sure this is necessary though.

Advert

Advert