OS X Does not see my 505 - Page 2

Lycoming · 08-17-2009, 04:07 PM

PB I think you have hit the nail etc. I was using a PC when I first bought my reader. I've only had my iMac and Macbook for 6 months.

Is it feasible to reformat the Sony but keep the books on Calibre on the iMac? I presume they would also disappear from the SD card.

Is there an idiot's guide to reformatting?

Finally; it is ADE which is not operating properly, as you say I'm waiting for the update for Macs later this month. Therefore is a reformat necessary, or should I just wait and see?

No wonder I get migraines.

pilotbob · 08-17-2009, 04:20 PM

Quote:

Originally Posted by Lycoming

Is it feasible to reformat the Sony but keep the books on Calibre on the iMac? I presume they would also disappear from the SD card.

Yes. But of course, if you can't mount the reader onto your Mac, there is no way to copy what is on it to your Mac's hard drive. The reformat will only reformat the internal memory. You will have to format the SD card with your Mac's disk utility. And formatting is always destructive. i hope you have coppies of all your books somewhere else. Or, if you have access to a windows machine some where you can copy them to that.

Quote:

Originally Posted by Lycoming

Is there an idiot's guide to reformatting?

The formatting directions are in the 505 user manual. It is on page 65. You can get the user manual here http://esupport.sony.com/US/perl/mod....pl?mdl=PRS505 if you don't have it handy.

Quote:

Originally Posted by Lycoming

Finally; it is ADE which is not operating properly, as you say I'm waiting for the update for Macs later this month. Therefore is a reformat necessary, or should I just wait and see?

Actually, ADE is working fine. It just doesn't know how to talk to the 505 yet. But, I am afraid even after you get the Mac version of the Sony software you are going to have to reformat that device. A Mac just won't mount an NTFS volume.

BOb

Lycoming · 08-17-2009, 04:31 PM

Many thanks for the prompt reply PB. The murk is starting to clear. Now I know what I have to do; I just need some clear time between the Grandson and his Grandma.

Luckily I do have a Dell laptop to save everything to. However, and this is right off topic, I feel like I'm stepping back in time when using Windows.

Inkummiiinnnnn.....

b0ned0me · 08-18-2009, 07:45 AM

Quote:

Originally Posted by pilotbob

A Mac just won't mount an NTFS volume.

I think there are cunning ways to get a Mac to read/write NTFS using utilities like e.g. macfuse and NTFS-3G. They might be worth looking into if reverting to the lowest common denominator of FAT32 does not appeal.

pthwaite · 08-18-2009, 08:34 AM

B0ned0me beat me to it but, yes, Macfuse and NTFS-3G will enable the mac to read and write to those drives.

pilotbob · 08-18-2009, 11:40 AM

Quote:

Originally Posted by pthwaite

B0ned0me beat me to it but, yes, Macfuse and NTFS-3G will enable the mac to read and write to those drives.

Yes, I knew these were available... and really meant to say Mac won't mount NTFS volume "out of the box".

I actually have MacFUSE installed. VMWare fusion actually installed it. They use it to be able to access the NTFS volume on the virtual machine from Mac finder.

That said, I think reformatting the device and SD card is the better way to do.

BOb

igorsk · 08-19-2009, 12:22 PM

Even if you get your Mac to read NTFS, Reader won't know how to handle it anyway.

hgosney · 08-21-2009, 11:39 AM

My reader works great with one of my computers but not the other. So I don't think that reformatting the reader will help?

I have never had it plugged into a Windows machine, it came out of the box like this. I don't have anything special installed on my laptop that would make it work with the reader.

I tried reformatting the reader as suggested and I didn't help.
If I was to try and reformat through Disk Utility it would wipe the reader completely, all of the sony software would be gone and I would have a way to get it back.

I am thinking now that it is a problem with my computer, not the reader.
When I first posted the question it was before I had tried my reader with my laptop.

Lycoming · 08-21-2009, 02:56 PM

I just tried reformatting my reader, as per Sony's online "How to" instructions. The new format is showing as MS-DOS (FAT16).

Calibre is recognising the book and the card, and is operating normally.

I think I'm going to have to wait until Sony get their act together and push the new ADE to us. Many thanks for all the useful input, which has clarified a few things for me about the way the systems operate.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Broken PRS-505; any place to buy chrome bottom piece? Or anyone with broken 505?	erikk	Sony Reader	1	12-09-2009 06:51 PM
My 505 is Dead, Long Live the 505	megasad	Sony Reader	11	10-22-2009 04:21 AM
PRS-505 Lost!! Buy 300, 600, Kindle or 505? have a lot LRF/LRX files	erikk	Which one should I buy?	13	10-01-2009 12:01 PM
Buy Looking for Sony PRS-505 blue cover (comes with the Dark Blue 505)	seajewel	Flea Market	0	07-17-2008 03:53 PM
505 E: drive window opens when I connect my 505	DrMoze	Sony Reader	7	03-26-2008 09:10 PM

08-17-2009, 04:07 PM	#16
Lycoming Capt Chaos II Posts: 483 Karma: 33043007 Join Date: Aug 2008 Location: Cornwall, UK Device: iPad2	PB I think you have hit the nail etc. I was using a PC when I first bought my reader. I've only had my iMac and Macbook for 6 months. Is it feasible to reformat the Sony but keep the books on Calibre on the iMac? I presume they would also disappear from the SD card. Is there an idiot's guide to reformatting? Finally; it is ADE which is not operating properly, as you say I'm waiting for the update for Macs later this month. Therefore is a reformat necessary, or should I just wait and see? No wonder I get migraines.

08-17-2009, 04:31 PM	#18
Lycoming Capt Chaos II Posts: 483 Karma: 33043007 Join Date: Aug 2008 Location: Cornwall, UK Device: iPad2	Many thanks for the prompt reply PB. The murk is starting to clear. Now I know what I have to do; I just need some clear time between the Grandson and his Grandma. Luckily I do have a Dell laptop to save everything to. However, and this is right off topic, I feel like I'm stepping back in time when using Windows. Inkummiiinnnnn.....

08-18-2009, 08:34 AM	#20
pthwaite Fanatic Posts: 597 Karma: 430 Join Date: Aug 2008 Location: Ellesmere Port, UK Device: DR1000S Sony PRS505 iPad iPhone	B0ned0me beat me to it but, yes, Macfuse and NTFS-3G will enable the mac to read and write to those drives.

08-19-2009, 12:22 PM	#22
igorsk Wizard Posts: 3,442 Karma: 300001 Join Date: Sep 2006 Location: Belgium Device: PRS-500/505/700, Kindle, Cybook Gen3, Words Gear	Even if you get your Mac to read NTFS, Reader won't know how to handle it anyway.

08-21-2009, 11:39 AM	#23
hgosney Junior Member Posts: 6 Karma: 14 Join Date: Aug 2009 Device: PRS-505	My reader works great with one of my computers but not the other. So I don't think that reformatting the reader will help? I have never had it plugged into a Windows machine, it came out of the box like this. I don't have anything special installed on my laptop that would make it work with the reader. I tried reformatting the reader as suggested and I didn't help. If I was to try and reformat through Disk Utility it would wipe the reader completely, all of the sony software would be gone and I would have a way to get it back. I am thinking now that it is a problem with my computer, not the reader. When I first posted the question it was before I had tried my reader with my laptop.

08-21-2009, 02:56 PM	#24
Lycoming Capt Chaos II Posts: 483 Karma: 33043007 Join Date: Aug 2008 Location: Cornwall, UK Device: iPad2	I just tried reformatting my reader, as per Sony's online "How to" instructions. The new format is showing as MS-DOS (FAT16). Calibre is recognising the book and the card, and is operating normally. I think I'm going to have to wait until Sony get their act together and push the new ADE to us. Many thanks for all the useful input, which has clarified a few things for me about the way the systems operate.

Advert

Advert