|
|||||||
![]() |
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
Junior Member
![]() Posts: 2
Karma: 10
Join Date: Oct 2026
Device: boox poke 4 lite
|
Poke 4 Lite (QCM2290) stuck on ONYX logo after boot_a flash — only 900E
I soft-bricked my Poke 4 Lite and I'm stuck one step before the fix.
Device: BOOX Poke 4 Lite, Android 11, FW 3.2.4 (2022-09-18), bengal / QCM2290, eMMC, A/B slots, power button only. The QCM2290 firehose loader works (I used it before the brick). What happened: adb reboot edl → 9008 worked fine. I dumped the GPT, userdata and boot_a with bkerler/edl. I flashed a Magisk-patched image to boot_a (edl w boot_a ...). vbmeta_a still has AVB enabled (flags=0), so now it hangs on the ONYX logo forever. I have the original boot_a.img backed up (and the full v4.0 OTA). I only need to write boot_a back. Current state: Holding power: the screen flickers, then ONYX comes back and it hangs again. On USB it always enumerates as 05c6:900e (QUSB_BULK_SN), never 9008. This happens with or without the EDL cable, and with a normal cable too. Uploading the loader in 900E fails with "Invalid transmission length". EDL cable (button type, "二代高通工程线 V2.0"): pressing the button while the device is enumerated kills the USB link (error -71), so the short works. I've tried: button held while plugging into a powered-off device; device on + button held + forced reboot with power. Always 900E. Recovery combo (USB unplugged, hold power until the LED, +7 s, 5 quick presses): no recovery menu. Next I'm trying a fully drained battery + EDL cable (that worked for someone with a Note Air 5c). Questions: Does anyone know the USB_BOOT / EDL test points on the Poke 4 Lite board (a photo would be great)? Or the UART pads? Is there any way to get from 900E (XBL ramdump Sahara) to 9008, e.g. a Sahara command, or something that makes ABL give up on slot a and fall back to slot b? What's the correct recovery key combo on the Poke 4 Lite? Thanks! |
|
|
|
![]() |
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Go 7 attempted root and now stuck on boox logo | jd27 | Onyx Boox | 91 | 06-28-2026 12:28 AM |
| Poke 4 Lite or 5? | therealTOEBEANS | Onyx Boox | 3 | 05-01-2024 10:53 PM |
| Onyx boox Poke 4 lite, first impression | norweger | Onyx Boox | 0 | 01-13-2023 07:24 AM |
| Poke 3 (& Poke 2, other Onyx?) screen light | Renate | Onyx Boox | 35 | 12-14-2022 08:41 AM |
| Stuck with a shop logo as wallpaper. | Wyre | Kobo Reader | 7 | 07-06-2017 12:57 PM |