Firmware 4.38.23697 - Page 2

JSWolf · 06-11-2026, 09:09 AM

Thanks to @xor_, The patch Both page turn buttons go next has been fixed.

https://www.mobileread.com/forums/sh....php?p=4589441

JSWolf · 06-11-2026, 05:04 PM

The patch Both page turn buttons go next has been fixed and now works.

rados2000 · 08-09-2026, 01:29 PM

Quote:

Originally Posted by EnterNameHere

Anecdotally (and it the absence of release notes for 4.38.23697) it feels to me as if my Libra 2, when used with the Kobo Remote, is not suffering from quite as bad a battery drain as it did with previous firmware.

I'd be interested to know if anybody else finds this.

it takes 6-8% per hour with 4.38.23697 with my Libra 2((

Alanon · Yesterday, 04:12 PM

I've started having a strange issue on my Kobo Aura ONE and the catalyst (or one of) seems to have been this latest firmware update.

Basically, something glitches during the cover rendering stage when putting the device to sleep, or when navigating to the cover! The cover renders an intermediary version (often mid some transition) but freezes, never renders the full grayscale cover, and the whole system hangs. The only solution is force restarting the device by holding the power button.

The scenario above is shown in images 1 and 3 in the post attachments. In image 1 I just put the device to sleep and the cover rendering got borked. In image 3 however, I resumed reading a book and navigated back to its cover, and the cover failed to render within the book, freezing the entire system.

This happens frequently, but not every time. Also, as far as I can tell, the system shuts down and renders the cover properly every time (Image 2 attachment shows the same cover as in attachment 1, properly rendered once I held the power button for a few seconds to shut down the system, and Pratchet’s book was the last opened one.)

Obviously, I haven't tested this too many times with many different books because I don't want to force a reboot of the device that frequently, but I’m certain this didn't happen at all before this update. I use patches, but I've been using the same patch-set before, for years, with zero issues.

This also is happening with e-books that I’ve had on the device for years, so it isn’t something new I just added to the library. I sideload all my books, and strive to embed high resolution cover images in all my files, so I am used to Kobo sometimes rendering covers in quadrants, but nothing like this.

I also tried KOReader, and it seems to exhibit the same behaviour, only with pdf and djvu files, which I have it set up for. This is somewhat worrying, as it points towards a hardware issue, unless Nickel and KOReader happen to share the graphical stack that does the cover rendering?

Is this happening to anyone else? Could it be something I've done? I also updated NickelMenu to the latest version (previously it was some older one), but it was successful, didn't require config changes, and either way, IMO this shouldn't really affect sleep or covers?

Is it possible to downgrade to the previous firmware? If possible, is it advisable? I'm not really gung-ho about that prospect, but the device is very inconvenient to use because of this issue. For now I just disabled rendering covers entirely during sleep or shutdown (rendering them non-fullscreen made no difference).

I'm at a bit of a loss here so any advice is welcome. If my device is on its way out I’d still like to know.

Sirtel · Yesterday, 04:33 PM

Quote:

Originally Posted by Alanon

Is it possible to downgrade to the previous firmware?

Yes. Whether it will fix the issue or not is anyone's guess, but there's no harm in trying.

(I'm not on the latest firmware with either of my Kobos, so no idea if the problem was caused by the update)

Alanon · Yesterday, 05:02 PM

Quote:

Originally Posted by Sirtel

Yes. Whether it will fix the issue or not is anyone's guess, but there's no harm in trying.

Thanks, Sirtel! Is there anything special to the procedure of downgrading as opposed to updating?

Sirtel · Yesterday, 05:18 PM

Quote:

Originally Posted by Alanon

Thanks, Sirtel! Is there anything special to the procedure of downgrading as opposed to updating?

If you only want to go back a couple of versions, then no; just extract the contents of the firmware zip into the .kobo folder, eject and unplug.

If you want to go back a lot of versions, then you should do a factory reset first.

JSWolf · Today, 06:22 AM

KOReader does not use Nickel. Any issues with KOReader has nothing to do with Kobo's software.

Yesterday, 04:12 PM	#19
Alanon Connoisseur Posts: 80 Karma: 10742 Join Date: Jul 2017 Location: Serbia Device: Kobo Aura One	I've started having a strange issue on my Kobo Aura ONE and the catalyst (or one of) seems to have been this latest firmware update. Basically, something glitches during the cover rendering stage when putting the device to sleep, or when navigating to the cover! The cover renders an intermediary version (often mid some transition) but freezes, never renders the full grayscale cover, and the whole system hangs. The only solution is force restarting the device by holding the power button. The scenario above is shown in images 1 and 3 in the post attachments. In image 1 I just put the device to sleep and the cover rendering got borked. In image 3 however, I resumed reading a book and navigated back to its cover, and the cover failed to render within the book, freezing the entire system. This happens frequently, but not every time. Also, as far as I can tell, the system shuts down and renders the cover properly every time (Image 2 attachment shows the same cover as in attachment 1, properly rendered once I held the power button for a few seconds to shut down the system, and Pratchet’s book was the last opened one.) Obviously, I haven't tested this too many times with many different books because I don't want to force a reboot of the device that frequently, but I’m certain this didn't happen at all before this update. I use patches, but I've been using the same patch-set before, for years, with zero issues. This also is happening with e-books that I’ve had on the device for years, so it isn’t something new I just added to the library. I sideload all my books, and strive to embed high resolution cover images in all my files, so I am used to Kobo sometimes rendering covers in quadrants, but nothing like this. I also tried KOReader, and it seems to exhibit the same behaviour, only with pdf and djvu files, which I have it set up for. This is somewhat worrying, as it points towards a hardware issue, unless Nickel and KOReader happen to share the graphical stack that does the cover rendering? Is this happening to anyone else? Could it be something I've done? I also updated NickelMenu to the latest version (previously it was some older one), but it was successful, didn't require config changes, and either way, IMO this shouldn't really affect sleep or covers? Is it possible to downgrade to the previous firmware? If possible, is it advisable? I'm not really gung-ho about that prospect, but the device is very inconvenient to use because of this issue. For now I just disabled rendering covers entirely during sleep or shutdown (rendering them non-fullscreen made no difference). I'm at a bit of a loss here so any advice is welcome. If my device is on its way out I’d still like to know. Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Firmware 4.45.23697	geek1011	Kobo Reader	18	06-30-2026 10:48 AM
Need to install international Boox Poke 5 firmware to China firmware	jeremynhan96	Onyx Boox	2	07-19-2024 08:42 PM
Firmware Update Instructions and the latest Firmware Versions	mitchwah	Ectaco jetBook	113	10-24-2023 09:02 PM
Nouveau firmware firmware 6.5.765 pour la Inkpad 3/PB740	mooms	PocketBook	0	11-08-2021 08:23 AM
Firmware glitch - typing text slow on some firmware+device combinations	mdp	Onyx Boox	11	11-11-2017 12:48 AM

06-11-2026, 09:09 AM	#16
JSWolf Resident Curmudgeon Posts: 84,887 Karma: 153788249 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	Thanks to @xor_, The patch Both page turn buttons go next has been fixed. https://www.mobileread.com/forums/sh....php?p=4589441

06-11-2026, 05:04 PM	#17
JSWolf Resident Curmudgeon Posts: 84,887 Karma: 153788249 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	The patch Both page turn buttons go next has been fixed and now works.

Today, 06:22 AM	#23
JSWolf Resident Curmudgeon Posts: 84,887 Karma: 153788249 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	KOReader does not use Nickel. Any issues with KOReader has nothing to do with Kobo's software.