Kobo µSD Card Image Requests

[rdobles]

I would like the firmware image for a Kobo N249 Clara HD, please.

[DNSB]

PMs sent

[ObiWanKenobi]

I would like the firmware image for a Kobo N249 Clara HD, please.

[reigor61]

I would like the firmware image for a Kobo N437 Glo HD.

Thank you very much in advance.

[Archibauld]

Originally Posted by DNSB

Due to the proliferation of threads asking for Kobo firmware images, I've decided to have this thread as a dedicated thread for firmware requests.

When making a request, please specify the make and model number of your Kobo ereader. I.e. if you want a firmware image for a Kobo Clara 2e, please mention N506 and Clara 2E in the message. This will help to ensure that you get the correct image.

Sample would be:

I would like the firmware image for a Kobo N437 Glo HD.

Hello! I would like a firmware image for my Kobo N705 Mini. Thank you in advanced.

Archie

[DNSB]

Originally Posted by reigor61

I would like the firmware image for a Kobo N437 Glo HD.

Thank you very much in advance.

You will need to have Private Messages enabled before you can be sent the link. If you don't see that option in the "Edit Options" of the User control panel, you should post in the Requests to enable Private Messages thread to ask for PMs to be enabled.

Once PMs are enabled, please re-post in this thread to let me know.

[DNSB]

PMs sent.

[Kobo4Life]

Hello,
I bought a 2nd hand Kobo Aura N236 and it got stuck on boot with only light screen on. There is nothing I could do so I tried to log in serial using puTTy.
Here is what I got:

U-Boot 2009.08-00075-ged67d40-dirty-svn ( 5月 17 2016 - 14:57:34)

CPU: Freescale i.MX6 family TO0.0 at 792 MHz
Temperature:   50 C, calibration data 0x54b4d45f
mx6q pll1: 792MHz
mx6q pll2: 528MHz
mx6q pll3: 480MHz
mx6q pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 24000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock     : 396000000Hz
usdhc1 clock  : 198000000Hz
usdhc2 clock  : 198000000Hz
usdhc3 clock  : 198000000Hz
usdhc4 clock  : 198000000Hz
Board: MX6SoloLite-NTX:[ POR ]
Boot Device: SD
I2C:   ready
DRAM:  256 MB
MMC:   ram p=80000000,size=268435456
csd is 0x400e0032, 0x5b590000, 0x1d8a7f80, 0xa404000
scr addr is 0x875feee0, switch_status addr is 0x875fee70
mmc0 is current device

MMC read: dev # 0, block # 1023, count 1 ... 1 blocks read: OK

MMC read: dev # 0, block # 1024, count 1 ... 1 blocks read: OK
HW switch boot from ESD
FSL_USDHC: 0,FSL_USDHC: 1,FSL_USDHC: 2
hw_anadig_reg_core=7c3e1f

MMC read: dev # 0, block # 34815, count 1 ... 1 blocks read: OK
binary magic @ sector no. 34816 not found !
"logo" not exist !!

MMC read: dev # 0, block # 18431, count 1 ... 1 blocks read: OK
binary magic @ sector no. 18432 not found !
"logo" not exist !!
In:    serial
Out:   serial
Err:   serial
ntx_hw_late_init()

MMC read: dev # 0, block # 1, count 1 ... 1 blocks read: OK
NTXSN:"N2367A0707152"
Device: FSL_USDHC
Manufacturer ID: 3
OEM: 5344
Name: SS04G
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
Clock: 50000000
High Capacity: Yes
Capacity: 3965190144 Bytes
Bus Width: 4-bit
Boot Partition for boot: No boot partition available
csd is 0x400e0032, 0x5b590000, 0x1d8a7f80, 0xa404000
scr addr is 0x875fef58, switch_status addr is 0x875feee8
ntx_config_fastboot_layout():9 binaries partition added
ntx_config_fastboot_layout():3 mbr partition added
Net:   No ethernet found.                                                                                                                 0
mmc0 is current device

 hwcfgp=8ffffe00,pcb=59,customer=9

ESDin=0,UPGKey=-1,PWRKey=0,USBin=0x0,BootESD=0,MenuKey=0

MMC read: dev # 0, block # 14335, count 1 ... 1 blocks read: OK

MMC read: dev # 0, block # 14336, count 2274 ... 2274 blocks read: OK

MMC read: dev # 0, block # 1029, count 1 ... 1 blocks read: OK
[WARNING] Binaries load sequence should Lo->Hi !

MMC read: dev # 0, block # 1030, count 2 ... 2 blocks read: OK
Kernel RAM visiable size=254M->254M

MMC read: dev # 0, block # 2047, count 1 ... 1 blocks read: OK
no kernel image signature !

MMC read: dev # 0, block # 2048, count 8192 ... 8192 blocks read: OK
hwcfg rootfstype : 2
hwcfg partition type : 2
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   415e60_#5018 Jun 23 13:40:14
   Created:      2016-06-23   5:40:18 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2362360 Bytes =  2.3 MB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

PMU: ricoh61x_battery_probe : version is RICOH61x_BATTERY_VERSION: 2014.02.21 V3.1.0.0-Solution1 2015/02/09
1+0 records in
1+0 records out
512 bytes (512B) copied, 0.000142 seconds, 3.4MB/s
cannot open /dev/null
[PROGRESS_BAR-3087] No progess ...
dosfsck 3.0.6, 04 Oct 2009, FAT32, LFN
There are differences between boot sector and its backup.
Differences: (offset:original/backup)
  489:8d/00, 490:ef/00, 491:02/00, 492:d2/00, 494:ff/00, 495:ff/00, 496:ff/00
  , 497:ff/00, 498:ff/00, 499:ff/00, 500:ff/00, 501:ff/00, 502:ff/00
  , 503:ff/00, 504:ff/00, 505:ff/00, 506:ff/00, 507:ff/00, 508:ff/00
  , 509:ff/00
  Not automatically fixing this.
/dev/mmcblk0p3: 372 files, 12170/825139 clusters

(none) login: killall: pickel: no process killed
sh: you need to specify whom to kill

We can see "Boot Partition for boot: No boot partition available".

So I tried to restore the internal memory on another sd card and same issue happened.

Is their a way to resolve this issue? or should I download a working img .
If so is their any kind enough people who would share an image?

[Kobo4Life]

Hi,

Is it possible to PM me those image:

Kobo N236 Aura Edition 2 V1
Kobo N236 Aura Edition 2 V2

I own a Kobo N236 Edition 2 . I don't know which of boths image I should use.
Since I bought it in 2nd hand market sadly frozen.

Thanks

[xxNotoriousss]

Hi i'd like to request the image for the Kobo N249 Clara HD. Thanks!

[DNSB]

PMs sent.

[sivaskarthi]

Hi,

Can you send me SD image for Kobo N249 Clara HD.
I tried factory reset and nothing seems to work, it's stuck at white screen now.

[Feathers]

Hello, could you please send me the image for a Kobo N249 Clara HD. Thanks!

[DNSB]

PMs sent.

[maurizio]

Hello,

I have a Kobo N705 Mini.

I tried to create a SDCard image,
to flash it on a new 32Gb SDCard,

But I get a read/write error.

Is it possible to have the .img of the card?

Many thanks,
Maurizio.