Tools Snapshots of NiLuJe's hacks

[mergen3107]

If I very quickly go and Eject the Kindle in Step 3, it then boots normally, but in usbms mode, so upon boot the screen says "connect to PC, etc etc", and I can see it on PC. Then I eject, Kindle mode is normal, but no usbnet.

[mergen3107]

So, it seems to me that timing of the usbnet is either wrong, or there is now a new safety check of the things on Kindle during boot, since it doesn't let usbnet start (beyond the first line, so probably it doesn't even start).

Should go and look (and only look ) inside the upstart scripts?

Where in the boot sequence do you usually intercept usbnet?

[mergen3107]

Originally Posted by Daviteusz

I'm thinking about how to adapt this to oasis3 but without changing the scribe version and how to center the text to the colons...

Try out this version, works on Kindle Scribe.
1) Aligned all colons
2) Added preventive paddings with leading spaces
3) Voltage has now separate line
4) The percentage sign is printed OK with eips, the old comment must be referring to very old FW...

[Daviteusz]

It would be a good idea to have one extension that supports different devices. Maybe I'll look into that in a while.

I'm getting different data from commands:

[root@kindle bin]# gasgauge-info -c
100%
[root@kindle bin]# gasgauge-info -l
-49 mA
[root@kindle bin]# gasgauge-info -m
1074 mAh
[root@kindle bin]# gasgauge-info -v
4281 mV
[root@kindle bin]# gasgauge-info -k
242 #24.2°C?

From KUAL:

[mergen3107]

Eh, thank you lab126
For now, you can tweak it for your Oasis

[NiLuJe]

Originally Posted by mergen3107

Is this how it usualy goes when you restart a Kindle with Enable usbnet on boot? I mean, things in Step 3.

Like I said, there's a long history of weird shit happening when you do that, and it varied across the years; but, yes, it's roughly familiar.

[NiLuJe]

As a sidenote, I would *strongly* recommend *not* attempting to mess with upstart jobs on a device without serial access (or at least a recovery option, e.g., RP/CRP), as you *will* soft-brick it if you screw up (and it is *very* easy to do so).

[NiLuJe]

Originally Posted by mergen3107

Where in the boot sequence do you usually intercept usbnet?

It's tied to volumd, which very well may need to be rethought depending on how the MTP situation evolves.

[mergen3107]

Originally Posted by NiLuJe

As a sidenote, I would *strongly* recommend *not* attempting to mess with upstart jobs on a device without serial access (or at least a recovery option, e.g., RP/CRP), as you *will* soft-brick it if you screw up (and it is *very* easy to do so).

Yep, that's why I only inteded to only look
There is also no RP/CRP for 5.16.x yet, so I'll just be careful.

[mergen3107]

Originally Posted by NiLuJe

It's tied to volumd, which very well may need to be rethought depending on how the MTP situation evolves.

I am on 5.16.2, which is not MTP yet (it appeared in 5.16.3 and on).
Alright, thank you!

I'll just focus my Tinkering Mana™ on converting manga or something xD

For now, I enabled SSH on boot + SSH over Wi-Fi.
1) This helps to save KOReader if I plug it to PC while reading - usbnet replaces usbms.
2) I will just remember to unplug before doing restart, which should be rare anyway.

[Daviteusz]

KPPCrashLogsRemover:

Allows easy deletion of KPP Crash Logs after using MRPI or after running KOReader (frameworkless).

All instructions can be found in the archive.

Edit: New version v1.2 released:
https://www.mobileread.com/forums/sh...postcount=1231

[quetza888]

i was trying to install usbnet but didnt work, kindles says couldnt updated and restart, dgx fw 2.5.8
is this normal? thanks

[Daviteusz]

Spoiler:

Originally Posted by Daviteusz

...
KPPCrashLogsRemover:

...

------------------------
For KUAL
-----------------------
This extension removes KPPCrashLogs from /mnt/us/documents/.
Useful after leaving Frameworkless KOReader or after using mrpi.

I have updated the script in the KUAL extension, it now supports multiple generated kpp logs.

[Daviteusz]

Originally Posted by Daviteusz

KPPCrashLogsRemover:

Allows easy deletion of KPP Crash Logs after using MRPI or after running KOReader (frameworkless).

All instructions can be found in the archive.

New version released! I think it's final.

[mergen3107]

@NiLuJe
Sorry, I missed it. Some packages got an update on Jan 4, what’s news?