KT3 screen is not responding

hermit1 · 03-25-2023, 05:17 AM

I got a Kindle Basic 2 (8th gen) which was reflashed (thanks for your help) because couldn't start.
Now starts well but screen is not responding so it's unusable. Is there any tool to diag or test it?

eddie.t.h · 03-25-2023, 08:29 AM

Are you testing it with the frame on the screen? He has an infrared touch and will not work without it. If so, check if you have not torn off any emitting or receiving diode when disassembling the device.

hermit1 · 03-25-2023, 02:09 PM

Quote:

Originally Posted by eddie.t.h

Are you testing it with the frame on the screen? He has an infrared touch and will not work without it. If so, check if you have not torn off any emitting or receiving diode when disassembling the device.

No, I had never thought this (the front cover also needed, the mid cover not enough). Thanks for you help I assembled it and working well!!!

eddie.t.h · 03-25-2023, 02:53 PM

The middle frame should be enough, only it must be very precisely attached, pay attention to the miniature pins fixing the position - they must enter the pcb.

03-25-2023, 05:17 AM	#1
hermit1 Junior Member Posts: 9 Karma: 10 Join Date: Mar 2023 Device: Kindle	screen is not responding I got a Kindle Basic 2 (8th gen) which was reflashed (thanks for your help) because couldn't start. Now starts well but screen is not responding so it's unusable. Is there any tool to diag or test it?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
KA1 koreader v2015.11-671 screen not responding	hkckoo	KOReader	3	11-06-2016 07:51 PM
Boyue T62+ Screen not Responding	jbm1	Android Devices	1	02-16-2016 01:34 PM
Kobo Aura screen not responding after firmware update	Valloric	Kobo Reader	8	05-21-2014 11:19 PM
part of screen not responding	silverraven	Barnes & Noble NOOK	3	02-09-2012 03:22 PM
PRS-600 Distorted screen and reader not responding	gribbs	Sony Reader	33	01-03-2012 07:09 AM

03-25-2023, 08:29 AM	#2
eddie.t.h Addict Posts: 201 Karma: 123456 Join Date: Jan 2018 Device: Too Much Kindle :-)	Are you testing it with the frame on the screen? He has an infrared touch and will not work without it. If so, check if you have not torn off any emitting or receiving diode when disassembling the device.

03-25-2023, 02:53 PM	#4
eddie.t.h Addict Posts: 201 Karma: 123456 Join Date: Jan 2018 Device: Too Much Kindle :-)	The middle frame should be enough, only it must be very precisely attached, pay attention to the miniature pins fixing the position - they must enter the pcb.