![]() |
#1 |
Junior Member
![]() Posts: 3
Karma: 10
Join Date: Feb 2020
Device: none
|
ROOT RK3368 (TWRP console)
TWRP only work in CONSOLE
Download Twrp and SuperSu https://mega.nz/file/kYxjibqT#gqmriW...z8RPuY8V9BV98w 1. RK_Driver_Assistant_ 2. RK_Android_Tool_ a. load config_16.cfg b. SWITCH to LOADER c. Flash twrp.img 3. After the flash IMMEDIATELY boot into recovery (may replace recovery) or (-- Adb_run >>> A - Adb / Fastboot manual input) ++++5. TWRP Console -- Root -- SuperSu a. 1SupersuInstall.zip b. 2supersu2.zip 6. Reboot ![]() Fake Wifi (Xposed Module) https://play.google.com/store/apps/d...fakewifi&hl=ru AnyDesk - need enable - background process https://play.google.com/store/apps/d...anydeskandroid |
![]() |
![]() |
![]() |
#2 |
Veteran Linux user
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 150
Karma: 1000000
Join Date: Mar 2017
Location: Barcelona/Spain
Device: Boyue Likebook Note & Mimas, Hisense A5, hopefully soon a PineNote
|
Thank you for this valuable information!
Does this work for all RK3368 based Boyue reader devices? Which specific device were you able to root this way? |
![]() |
![]() |
![]() |
#3 |
Junior Member
![]() Posts: 3
Karma: 10
Join Date: Feb 2020
Device: none
|
|
![]() |
![]() |
![]() |
#4 | |
Junior Member
![]() Posts: 1
Karma: 10
Join Date: Jul 2020
Device: Alita
|
Quote:
|
|
![]() |
![]() |
![]() |
#5 |
Junior Member
![]() Posts: 2
Karma: 10
Join Date: Jul 2020
Device: Likebook Mars
|
I tried following this but I couldn't figure out how to reboot into recovery after flashing. Now my device is stuck booting forever when I try to turn it on. It doesn't respond to adb, fastboot or the loader. Any way I can get it back into recovery or bootloader mode?
|
![]() |
![]() |
![]() |
#6 |
Junior Member
![]() Posts: 2
Karma: 10
Join Date: Jul 2020
Device: Likebook Mars
|
Sorry for double post, it won't let me edit. I made it to recovery, for anyone else that gets stuck in the same situation, you can just hold the power button until the loader stops. Then press and hold the reset button, hold the power button until it starts booting again, and continue to hold reset until it reaches recovery.
But unfortunately I still can't get it to boot, I guess I'll have to reinstall stock firmware.. For anyone else wanting to try this, may want to backup first.. |
![]() |
![]() |
![]() |
#7 |
Connoisseur
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 93
Karma: 3277
Join Date: Jun 2017
Device: Kobo,Tolino,BN,PB,Kindle,Likebook,Inkbook
|
|
![]() |
![]() |
![]() |
#8 |
Connoisseur
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 90
Karma: 2082592
Join Date: Mar 2019
Location: Singapore
Device: Likebook Mimas (main) + (many others)
|
That adds to my suspicion that the native LCD interface (whether it be TTL, LVDS, or eDP) of the RK3368 had been bypassed, supressed, or otherwise disabled, and that Boyue may have been using all or part of a reference design from E-ink to drive the display, more specifically, at least the same IT8951 chip used on their "ICE" evaluation board (also the Waveshare IT8951 driver board that appears to be a compatible board with additional features), however, while I had taken apart my Likebook Muses (which I bought as a parts device for $20 and fixed as part of an iFixit guide I'm writing) and took photos of both sides of the mainboard (and more), the IT8951 chip, if it's used, is most likely located under the same metal can the RK3386 is located under. If it does in fact use a IT8951, we'd need to find the hardware addresses, and possibly port FBInk to it, but I feel that the KOReader team may have already found those GPIO addresses.
|
![]() |
![]() |
![]() |
#9 |
Wizard
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 1,500
Karma: 5000046
Join Date: Feb 2012
Location: Cape Canaveral
Device: Kindle Scribe
|
Has anyone tried this on Likebook P78 or P10?
|
![]() |
![]() |
![]() |
#10 |
Connoisseur
![]() Posts: 69
Karma: 10
Join Date: Nov 2018
Device: Kindle paperwhite, Likebook Mars, Kobo Aura Ed. 2, Kobo Touch
|
Hi, any chance for rockchip RK3326 (Likebook P6 device)?
|
![]() |
![]() |
![]() |
#11 |
Member
![]() Posts: 12
Karma: 10
Join Date: Oct 2019
Device: Likebook Mars
|
To mergen3107
P10 is based on the Rockchip RK3066 (according to CPU Z) |
![]() |
![]() |
![]() |
#12 |
Junior Member
![]() Posts: 2
Karma: 10
Join Date: Jan 2023
Device: BoYue LemonRead S62A
|
I'm sad to say none of the provided TWRP firmwares supplied here worked for me on my BoYue LemonRead S62A. It's an unusual failure too: The flashing succeeds but when the device reboots, it lands in the default recovery as if nothing was written. My best guess is that BoYue modified the bootloader to overwrite the recovery with a copy if it's been modified. The reason I believe this to be the case is that I still managed to root using the same tools by modifying the system image itself following the procedure here: https://www.mobileread.com/forums/sh...d.php?t=326914
Anyhow, thanks for providing the tools and instruction on how to use the dumper. |
![]() |
![]() |
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Poking around Android system on RK3368 based Likebook devices; here are my findings | MustardOrMayo | Boyue | 17 | 09-25-2020 04:05 AM |
PRS-T1 Can't root/un-root/use SD Rescue/boot into Recovery Console | bookp | Sony Reader Dev Corner | 6 | 03-07-2016 03:22 AM |
[Librie-Dev] Root console on Sony Librie with USBPD | Alexander Turcic | Legacy E-Book Devices | 0 | 07-24-2005 04:40 AM |