Clara 2E Kobo Clara 2E Thread - Page 6

PeterT · 09-05-2022, 09:37 AM

Quote:

Originally Posted by JSWolf

Is anyone going to take over adding new devices and firmware versions to Calibre?

Jon; I'm actively working on that. If you'd bothered to read a post before your reply you would have seen that I have the updates just about ready to submit.

Sent from my Pixel 4a using Tapatalk

Quoth · 09-05-2022, 12:02 PM

Quote:

Originally Posted by MGlitch

Ah I suspect you’re going to be waiting a long while then. Kobo seems to like the current Libra 2/Sage/Elipsa form factor for anything above 6 inch.

I like it. I'd only want the buttons and big shoulder on the bottom if it was 5".
IMO a 5" and 8" and 13" makes more sense than current 6, 7, 8 & 10.3"

MGlitch · 09-05-2022, 12:09 PM

Quote:

Originally Posted by Quoth

I like it. I'd only want the buttons and big shoulder on the bottom if it was 5".
IMO a 5" and 8" and 13" makes more sense than current 6, 7, 8 & 10.3"

I think the market would go 6, 8, 10, 13. But I will agree that 6, 7, 8, 10.3 doesn’t make sense to me.

There’s demand here for 5, but even that is pretty small and we are a niche group of a relatively small group so I’m not sure of the commercial viability of a 5 inch device.

To steer this a bit back on topic the Clara hd 2e isn’t for me (hardly a surprise if you follow my device history) but I’m glad it exists for those who want a 6 inch screen.

JSWolf · 09-05-2022, 12:52 PM

Quote:

Originally Posted by PeterT

Jon; I'm actively working on that. If you'd bothered to read a post before your reply you would have seen that I have the updates just about ready to submit.

Sent from my Pixel 4a using Tapatalk

Sorry, I did miss that.

Thank you for taking over keeping Calibre updated to handle new devices.

PeterT · 09-06-2022, 01:31 PM

For folks planning on getting a Clara 2E, are you on calibre 5 or 6. If on 5 do you also use Kobo touch extended?

Sent from my Pixel 4a using Tapatalk

HLS · 09-06-2022, 03:15 PM

Looks to be the same as the old clear but with a power button on back instead of the bottom.

John F · 09-06-2022, 03:36 PM

Quote:

Originally Posted by PeterT

For folks planning on getting a Clara 2E, are you on calibre 5 or 6. If on 5 do you also use Kobo touch extended?

Sent from my Pixel 4a using Tapatalk

I'm not sure if I'll be getting it, but I try not to upgrade Calibre. I am on 5.33.2.

Is there a reason why a new version of Calibre needs to be released for each new Kobo hardware and firmware? Couldn't a configuration file be used? Just curious.

rtiangha · 09-06-2022, 04:30 PM

People on 32-bit Windows machines have to stay on Calibre 5 as QT6 (and therefore Calibre 6) only supports 64-bit machines. Some people still on Windows 7 also have to stick with Calibre 5.

JSWolf · 09-06-2022, 04:38 PM

Quote:

Originally Posted by rtiangha

People on 32-bit Windows machines have to stay on Calibre 5 as QT6 (and therefore Calibre 6) only supports 64-bit machines. Some people still on Windows 7 also have to stick with Calibre 5.

Some people on a 32-bit Windows are using hardware that supports 64-bit Windows. Also, some on Windows 7 are using hardware good enough to run Windows 10. There could be some on Windows 8.1 who have not upgraded to Windows 10. Calibre 6 will not run on Windows earlier then a late enough version of Windows 10.

These people I have no sympathy for not being able to run Calibre 6. They made the choice.

But yes, there are some not able to run Calibre 6 like those on older MAC or on hardware that's running 32-bit Windows because it cannot run 64-bit Windows.

But I do agree that there should be a way to add new hardware and firmware to Calibre 5 (latest version of Calibre 5) as well as Calibre 6.

rtiangha · 09-06-2022, 07:37 PM

Or the manufacturer made the choice. In the case of many popular netbooks running Intel Atoms, either the manufacturer put a 32-bit version of Windows 10 on them because of low RAM, or in the case of Cherry Trail chips, were always 32-bit to begin with. And yet these machines will be supported by Microsoft until 2023 or 2025. I don't think it's fair to ask grandma to reinstall an OS just to run Calibre, assuming she knows how to do such a thing in the first place.

Anyway, davidfor was working on a version of things that could support Calibre 5; hopefully people can find a way to continue that.

RobertJSawyer · 09-06-2022, 09:26 PM

@PeterT, I am on Calibre 5 and do indeed use Kobo Touch Extended.

PeterT · 09-06-2022, 10:06 PM

I believe it will be relatively simple to supply a plugin to enable Kobo Clara 2E support for older calibre (5 and maybe earlier). I think that KTE might be more involved but I'll try.

It will based on a plugin David had supplied for an earlier version (maybe calibre 3 or 4).

As to why the need to update the plugin for new releases / devices it's the way the driver is designed. It needs to know items like the USB identifier of each device, screen resolution, etc.

It is conceivable that all that could be handled via a config file but.... that is in many ways counter to the way everything else is done.

Of course, in the words of the mighty Kovid Goyal, patches are welcome!

Sent from my Pixel 4a using Tapatalk

DNSB · 09-07-2022, 01:43 AM

Is that the KoboTouch348 driver referenced in the linked message?

PeterT · 09-07-2022, 07:40 AM

Quote:

Originally Posted by DNSB

Is that the KoboTouch348 driver referenced in the linked message?

Bingo. I intend something similar for 5 and an update to the 348.

I'll have to investigate the complexities for KTE though

Sent from my Pixel 4a using Tapatalk

Deobulakenyo · 09-09-2022, 10:34 PM

Unboxing and Kindle PW5 comparison in English by Morning Coach

https://youtu.be/Z3R1ozkJY_A

09-09-2022, 10:34 PM	#90
Deobulakenyo Guru Posts: 706 Karma: 2153490 Join Date: Aug 2021 Location: Stupid Philippines Device: Kobo Libra 2, Boyue Likebook P78	Unboxing and Kindle PW5 comparison in English by Morning Coach https://youtu.be/Z3R1ozkJY_A Last edited by Deobulakenyo; 09-09-2022 at 10:37 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kobo Libra H20 vs Kobo Clara HD vs Pocketbook Touch HD3	cm1	Which one should I buy?	28	01-27-2021 01:18 PM
Kobo Clara back on sale at Walmart, Amazon and Kobo	rcentros	Deals and Resources (No Self-Promotion or Affiliate Links)	2	12-11-2019 09:04 PM
Kobo Clara $100 at Walmart, Amazon and Kobo	rcentros	Deals and Resources (No Self-Promotion or Affiliate Links)	12	11-29-2019 04:49 PM
Kobo Clara HD	Derf	Kobo Reader	142	04-19-2019 01:24 PM
Kobo Clara HD	Agama	Devices	12	07-20-2018 11:15 PM

09-06-2022, 01:31 PM	#80
PeterT Grand Sorcerer Posts: 13,545 Karma: 79436716 Join Date: Nov 2007 Location: Toronto Device: Libra H2O, Libra Colour	For folks planning on getting a Clara 2E, are you on calibre 5 or 6. If on 5 do you also use Kobo touch extended? Sent from my Pixel 4a using Tapatalk

09-06-2022, 03:15 PM	#81
HLS Wizard Posts: 2,133 Karma: 16342480 Join Date: May 2017 Device: Sage, Scribe, Boox Note 2 Plus, iPad Pros and Samsungs S6,S7,S8	Looks to be the same as the old clear but with a power button on back instead of the bottom.

09-06-2022, 04:30 PM	#83
rtiangha Evangelist Posts: 495 Karma: 356531 Join Date: Jul 2016 Location: 'burta, Canada Device: Kobo Glo HD	People on 32-bit Windows machines have to stay on Calibre 5 as QT6 (and therefore Calibre 6) only supports 64-bit machines. Some people still on Windows 7 also have to stick with Calibre 5.

09-06-2022, 07:37 PM	#85
rtiangha Evangelist Posts: 495 Karma: 356531 Join Date: Jul 2016 Location: 'burta, Canada Device: Kobo Glo HD	Or the manufacturer made the choice. In the case of many popular netbooks running Intel Atoms, either the manufacturer put a 32-bit version of Windows 10 on them because of low RAM, or in the case of Cherry Trail chips, were always 32-bit to begin with. And yet these machines will be supported by Microsoft until 2023 or 2025. I don't think it's fair to ask grandma to reinstall an OS just to run Calibre, assuming she knows how to do such a thing in the first place. Anyway, davidfor was working on a version of things that could support Calibre 5; hopefully people can find a way to continue that.

09-06-2022, 09:26 PM	#86
RobertJSawyer Guru Posts: 738 Karma: 4306712 Join Date: Jun 2006 Location: Toronto Device: Kobo Libra 2, Clara 2E, and Clara HD; Kindle PaperWhite	@PeterT, I am on Calibre 5 and do indeed use Kobo Touch Extended.

09-06-2022, 10:06 PM	#87
PeterT Grand Sorcerer Posts: 13,545 Karma: 79436716 Join Date: Nov 2007 Location: Toronto Device: Libra H2O, Libra Colour	I believe it will be relatively simple to supply a plugin to enable Kobo Clara 2E support for older calibre (5 and maybe earlier). I think that KTE might be more involved but I'll try. It will based on a plugin David had supplied for an earlier version (maybe calibre 3 or 4). As to why the need to update the plugin for new releases / devices it's the way the driver is designed. It needs to know items like the USB identifier of each device, screen resolution, etc. It is conceivable that all that could be handled via a config file but.... that is in many ways counter to the way everything else is done. Of course, in the words of the mighty Kovid Goyal, patches are welcome! Sent from my Pixel 4a using Tapatalk

09-07-2022, 01:43 AM	#88
DNSB Bibliophagist Posts: 46,534 Karma: 169115146 Join Date: Jul 2010 Location: Vancouver Device: Kobo Sage, Libra Colour, Lenovo M8 FHD, Paperwhite 4, Tolino epos	Is that the KoboTouch348 driver referenced in the linked message?