Firmware 4.33.19759 - Page 11

Rid · 08-08-2022, 09:21 PM

I have disabled pinch to change font size. Noticed that the font size was sometimes changing between reading sessions, I think it was the sleep cover causing it...

xyclonei · 08-09-2022, 01:18 AM

Quote:

Originally Posted by Rid

I have disabled pinch to change font size. Noticed that the font size was sometimes changing between reading sessions, I think it was the sleep cover causing it...

I've disabled it too as it's quite slow & cumbersome on an e-ink screen. I wish rather than changing the font size directly, Kobo would implement a slider that pops up with the gesture where the font can be adjusted.

JSWolf · 08-09-2022, 09:01 AM

Quote:

Originally Posted by xyclonei

I've disabled it too as it's quite slow & cumbersome on an e-ink screen. I wish rather than changing the font size directly, Kobo would implement a slider that pops up with the gesture where the font can be adjusted.

Kobo already has that. The gestures are two taps.

petercreasey · 08-09-2022, 09:37 AM

Is this update safe to install for Aura One with no extensions?

JSWolf · 08-09-2022, 09:39 AM

Quote:

Originally Posted by petercreasey

Is this update safe to install for Aura One with no extensions?

Yes, it is safe to install.

beedaddy · 08-09-2022, 01:33 PM

I, too, miss this pinch gesture for the font size. And there is no option in the settings. Updating to this firmware version was the first thing I did after I got my Libra 2. But I also did apply the one or other patch. But that shouldn't be a problem, right?

davidfor · 08-10-2022, 02:49 AM

Quote:

Originally Posted by beedaddy

I, too, miss this pinch gesture for the font size. And there is no option in the settings. Updating to this firmware version was the first thing I did after I got my Libra 2. But I also did apply the one or other patch. But that shouldn't be a problem, right?

Has the device updated to firmware version 4.33.19759? If not, sync it again and it should find the update. For some reason, there is a two-step update for the Libra 2. When a Libra 2 is being set up, either when new or after a factory reset, it will update to 4.30.18838. Then, when it syncs again, it will update to 4.33.19759. If you haven't let the device sync since setting it up, then it will not be on 4.33.19759 and won't have the pinch gesture for the font size.

beedaddy · 08-10-2022, 03:12 AM

Quote:

Originally Posted by davidfor

Has the device updated to firmware version 4.33.19759? If not, sync it again and it should find the update. For some reason, there is a two-step update for the Libra 2. When a Libra 2 is being set up, either when new or after a factory reset, it will update to 4.30.18838. Then, when it syncs again, it will update to 4.33.19759. If you haven't let the device sync since setting it up, then it will not be on 4.33.19759 and won't have the pinch gesture for the font size.

Yes, it's definitely version 4.33.19759 running on the device (see attached photo).

davidfor · 08-10-2022, 04:52 AM

Quote:

Originally Posted by beedaddy

Yes, it's definitely version 4.33.19759 running on the device (see attached photo).

In that case, the pinch gesture should be there. The option is in the Reading settings as part of the "Onscreen Controls". It should be the first option under the tap control choices.

JSWolf · 08-10-2022, 04:58 AM

Pinch to change the font size does work on my Libra 2. But there is a bug in this where it changes the slider position for line height (or is it margins). But it's not changing the on screen setting. But if you got o put the slider back to where it was, it will change until you get it where is was.

beedaddy · 08-10-2022, 05:09 AM

Quote:

Originally Posted by davidfor

The option is in the Reading settings as part of the "Onscreen Controls". It should be the first option under the tap control choices.

Mh, no, there's nothing there.

davidfor · 08-10-2022, 08:15 AM

Quote:

Originally Posted by beedaddy

Mh, no, there's nothing there.

That's strange. Have you restarted since the update? Are you patching the firmware?

You could try manually applying the update. That can fix some strange things. Another way would be to downgrade to 4.33.19608 or earlier and update again.

Ned · 08-10-2022, 08:18 AM

Just to report that I have had a random restart on my Libra 2 with this firmware 4.33.19759.
It's just over a fortnight since I installed it, and this is the first.
Nothing special on it, just your standard patch and nickel clock, only about a dozen books.
Not connected to the net since installing it, just read a couple of books, turning on and off (sleep) by opening and closing the cover.
Was quietly reading to myself just now when it restarted as I was halfway down a page, not turning or doing anything else.
Oh dear me!

Quoth · 08-10-2022, 08:40 AM

4.32.x is solid.

Sirtel · 08-10-2022, 09:01 AM

Quote:

Originally Posted by Quoth

4.32.x is solid.

Yeah. Both my Kobos are still on that and so far I haven't seen a reason to update.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Firmware Update Instructions and the latest Firmware Versions	mitchwah	Ectaco jetBook	113	10-24-2023 09:02 PM
Nouveau firmware firmware 6.5.765 pour la Inkpad 3/PB740	mooms	PocketBook	0	11-08-2021 08:23 AM
Firmware Update Kindle firmware 5.12.1	eilon	Amazon Kindle	102	09-26-2019 08:38 PM
Firmware glitch - typing text slow on some firmware+device combinations	mdp	Onyx Boox	11	11-11-2017 12:48 AM
Firmware 2.0.3 Pocketbook IQ - another firmware is release for IQ	tvpupsik	PocketBook	26	12-13-2010 03:03 PM

08-08-2022, 09:21 PM	#151
Rid Addict Posts: 209 Karma: 20980 Join Date: Oct 2020 Device: Kobo Aura One, Aura HD (R.I.P.) :(	I have disabled pinch to change font size. Noticed that the font size was sometimes changing between reading sessions, I think it was the sleep cover causing it...

08-09-2022, 09:37 AM	#154
petercreasey Wizard Posts: 1,189 Karma: 1119516 Join Date: Aug 2009 Device: Sony: PRS 950 & T1, Kobo: Aura One & Forma	Is this update safe to install for Aura One with no extensions?

08-09-2022, 01:33 PM	#156
beedaddy Addict Posts: 213 Karma: 135428 Join Date: Oct 2011 Location: Germany (south-west) Device: Kobo Libra 2 & Clara 2E, Tolino shine 5th Gen	I, too, miss this pinch gesture for the font size. And there is no option in the settings. Updating to this firmware version was the first thing I did after I got my Libra 2. But I also did apply the one or other patch. But that shouldn't be a problem, right?

08-10-2022, 04:58 AM	#160
JSWolf Resident Curmudgeon Posts: 80,727 Karma: 150249619 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	Pinch to change the font size does work on my Libra 2. But there is a bug in this where it changes the slider position for line height (or is it margins). But it's not changing the on screen setting. But if you got o put the slider back to where it was, it will change until you get it where is was.

08-10-2022, 08:18 AM	#163
Ned Ebook reader Posts: 389 Karma: 5899335 Join Date: Oct 2008 Location: York, England Device: Kobo Aura H2O (ed 2, v1), Kobo Forma, Kobo Libra 2	Just to report that I have had a random restart on my Libra 2 with this firmware 4.33.19759. It's just over a fortnight since I installed it, and this is the first. Nothing special on it, just your standard patch and nickel clock, only about a dozen books. Not connected to the net since installing it, just read a couple of books, turning on and off (sleep) by opening and closing the cover. Was quietly reading to myself just now when it restarted as I was halfway down a page, not turning or doing anything else. Oh dear me!

08-10-2022, 08:40 AM	#164
Quoth Still reading Posts: 14,975 Karma: 111111111 Join Date: Jun 2017 Location: Ireland Device: All 4 Kinds: epub eink, Kindle, android eink, NxtPaper	4.32.x is solid.