[Conversion Output] KePub Output Plugin - Page 36

giododa · 07-17-2022, 08:55 AM

I forget to tell you that the same message appears when i try to open the "output options" window in Calibre preferences menu (see image)

emiliolara · 07-17-2022, 01:58 PM

Same problem here...

Quote:

Originally Posted by giododa

When the conversion dialog window open the default output format is epub.
When I select kepub this message error appears

Spoiler:

Then I click anyway on OK and this new message follows

Spoiler:

davidfor · 07-18-2022, 03:40 AM

Quote:

Originally Posted by giododa

I forget to tell you that the same message appears when i try to open the "output options" window in Calibre preferences menu (see image)

Were you running the 32bit version of calibre before? There have been some issues with the change-over from 32bit to 64bit. Sometimes it isn't done cleanly and the wrong executable or library gets used. If so, can you uninstall calibre and look to see if there are any 32bit version still shown in the Add/Remove programs and uninstall that. Then remove the "calibre2" directories from both "C:\Program Files" and "C:\Program Files(x86)". Then reinstall calibre.

Otherwise, please run calibre in debug mode and post the log. There might be something failing earlier that is triggering this.

giododa · 07-18-2022, 04:21 AM

Thank you for your reply.
I never used the 32bit version on the pc I'm using now.
Here is the log in debug mode

davidfor · 07-18-2022, 05:53 AM

Quote:

Originally Posted by giododa

Thank you for your reply.
I never used the 32bit version on the pc I'm using now.
Here is the log in debug mode

Unfortunately, that didn't help. But, did you open try the conversion? The error from it is missing, but I can't think if there should be anything else as well.

giododa · 07-18-2022, 06:06 AM

No I just opened Calibre.
Sorry, I did not understand.
Here is the log trying to convert.

davidfor · 07-19-2022, 12:08 AM

Quote:

Originally Posted by giododa

No I just opened Calibre.
Sorry, I did not understand.
Here is the log trying to convert.

Unfortunately, that did not have anything helpful in it.

Looking at the code, I can see something, but, I don't understand why it isn't breaking for others.

I have attached a beta that changes how the Qt library is loaded, and removes the code that loads Qt4 if loading from the current Qt fails. It works here, but, so did the other version. Hopefully it works.

giododa · 07-19-2022, 02:14 AM

Quote:

Originally Posted by davidfor

Unfortunately, that did not have anything helpful in it.

Looking at the code, I can see something, but, I don't understand why it isn't breaking for others.

I have attached a beta that changes how the Qt library is loaded, and removes the code that loads Qt4 if loading from the current Qt fails. It works here, but, so did the other version. Hopefully it works.

Ok I just installed your beta and something has changed.
When I click "convert book" in the main Calibre window and click to select Kepub in the convert book windows this message popup

Spoiler:

Then if I close the message popup I can set the preferences for the conversion to kepub and if I hit OK the processing begins but the conversion fails and another error message pop up

Spoiler:

The error has something to do with temporary folders and it seem the same I receive when sending book to my Kobo with the KoboTouchExtended plugin.
I will try to understand why this happens as moving the Temp directory location in not working.

If you need I attach the debug logfile.
Anyway thank you for your effort.

davidfor · 07-19-2022, 03:09 AM

Quote:

Originally Posted by giododa

Ok I just installed your beta and something has changed.
When I click "convert book" in the main Calibre window and click to select Kepub in the convert book windows this message popup

Spoiler:

Sorry, I didn't check if similar code elsewhere. The attached beta should fix this.

Quote:

Then if I close the message popup I can set the preferences for the conversion to kepub and if I hit OK the processing begins but the conversion fails and another error message pop up

Spoiler:

The error has something to do with temporary folders and it seem the same I receive when sending book to my Kobo with the KoboTouchExtended plugin.
I will try to understand why this happens as moving the Temp directory location in not working.

If you need I attach the debug logfile.
Anyway thank you for your effort.

As it is a permissions problem, you could try running calibre as an administrator. If that works, then you would need to work out why you do not have permissions for the temp directory.

If it still fails, it might be a threading issue. The file might be still opened at the time the write is being done. I would have to dig back through some of the beta's last year that were done to try and solve the threading issues to see if all of the ideas were used.

giododa · 07-19-2022, 03:41 AM

Quote:

Originally Posted by davidfor

Sorry, I didn't check if similar code elsewhere. The attached beta should fix this.

It works.

Quote:

As it is a permissions problem, you could try running calibre as an administrator. If that works, then you would need to work out why you do not have permissions for the temp directory.

Strangely it worked at the first attempt and created the kepub file (runnin as administrator).
But now it works no more.
It fails also runnin as administator.

I will check problems with permissions.

Thank you.

giododa · 07-19-2022, 04:12 AM

I checked again and moved the environmental variables to drive C.
Now it works with some epub and not with others.
Sometimes trying many times (5-6) with the same book it works and create the kepub.
I will investigate.

davidfor · 07-19-2022, 04:56 AM

Quote:

Originally Posted by giododa

Strangely it worked at the first attempt and created the kepub file (runnin as administrator).
But now it works no more.
It fails also runnin as administator.

I will check problems with permissions.

Thank you.

Quote:

Originally Posted by giododa

I checked again and moved the environmental variables to drive C.
Now it works with some epub and not with others.
Sometimes trying many times (5-6) with the same book it works and create the kepub.
I will investigate.

I think that means it is the threading. Try the attached beta. That has a some code in it from earlier in the year that I think fixed these problems at the time. From memory, it only was tested in the extended driver, but, the code is common between them, so it should be OK here.

giododa · 07-19-2022, 11:23 AM

Thank you I will try.
Unfortunately just this morning I had a big problem with my pc and I guess I will reinstall everything.
As soon as done I will inform you.

giododa · 07-20-2022, 01:57 PM

That did the trick.
Now it is perfect.

I just did a fresh reinstallation of Windows10 but I don't think this is the reason for your plugin working.
Infact the KoboTouchExtended plugin is still not working with the same threading error.
Thank you again.

Denis_F · 07-21-2022, 01:12 PM

Hello there,

I have the same problem as giododa (i.e. when updating to calibre 6.1 64 bits), when trying to convert an epub through the (newly re-installed) Kepub extension I get the same error message (No module named 'PyQt4') detailed below when I click on OK...is there any prospect so as to update the Kepub extension to solve this issue ?

Thank you for your help !

Code:

calibre, version 6.1.0
ERREUR : Exception non gérée: <b>ModuleNotFoundError</b>:No module named 'PyQt4'

calibre 6.1  embedded-python: True
Windows-10-10.0.19044-SP0 Windows ('64bit', 'WindowsPE')
('Windows', '10', '10.0.19044')
Python 3.10.1
Windows: ('10', '10.0.19044', 'SP0', 'Multiprocessor Free')
Interface language: fr
Successfully initialized third party plugins: DeDRM (7, 0, 0) && KePub Input (3, 4, 3) && KePub Output (3, 6, 0)
Traceback (most recent call last):
  File "calibre_plugins.kepubout.conversion.output_config", line 66, in setupUi
ImportError: cannot import name 'Qt' from 'qt' (C:\Program Files\Calibre2\app\bin\python-lib.bypy.frozen\qt\__init__.pyc)

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "calibre\gui2\convert\single.py", line 225, in setup_pipeline
  File "calibre_plugins.kepubout.conversion.kepub_output", line 141, in gui_configuration_widget
  File "calibre_plugins.kepubout.conversion.output_config", line 40, in __init__
  File "calibre\gui2\convert\__init__.py", line 65, in __init__
  File "calibre_plugins.kepubout.conversion.output_config", line 69, in setupUi
ModuleNotFoundError: No module named 'PyQt4'

07-17-2022, 08:55 AM	#526
giododa Connoisseur Posts: 76 Karma: 30702 Join Date: Jul 2010 Location: Italy Device: Kobo Libra H2O	I forget to tell you that the same message appears when i try to open the "output options" window in Calibre preferences menu (see image) Attached Thumbnails Last edited by giododa; 07-17-2022 at 09:20 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
catalogue builder output columns are not in the same order in the output	KWhytte	Library Management	5	12-04-2012 02:03 AM
Plugin not customizable: Plugin: HTML Output does not need customization	flyingfoxlee	Conversion	2	02-24-2012 02:24 AM
Plugin which uses net as input and output	medve	Development	0	12-04-2011 03:20 PM
Creat new Output plugin (LaTeX and/or txt2tags)	Lebewesen	Development	3	11-22-2011 11:10 AM
AZW Conversion Output Plugin	tylau0	Plugins	59	08-14-2011 10:36 PM

07-19-2022, 04:12 AM	#536
giododa Connoisseur Posts: 76 Karma: 30702 Join Date: Jul 2010 Location: Italy Device: Kobo Libra H2O	I checked again and moved the environmental variables to drive C. Now it works with some epub and not with others. Sometimes trying many times (5-6) with the same book it works and create the kepub. I will investigate.

07-19-2022, 11:23 AM	#538
giododa Connoisseur Posts: 76 Karma: 30702 Join Date: Jul 2010 Location: Italy Device: Kobo Libra H2O	Thank you I will try. Unfortunately just this morning I had a big problem with my pc and I guess I will reinstall everything. As soon as done I will inform you.

07-20-2022, 01:57 PM	#539
giododa Connoisseur Posts: 76 Karma: 30702 Join Date: Jul 2010 Location: Italy Device: Kobo Libra H2O	That did the trick. Now it is perfect. I just did a fresh reinstallation of Windows10 but I don't think this is the reason for your plugin working. Infact the KoboTouchExtended plugin is still not working with the same threading error. Thank you again.